40 research outputs found

    Joint Detection of Serum IgM/IgG Antibody Is an Important Key to Clinical Diagnosis of SARS-CoV-2 Infection

    No full text
    Background. This study was aimed to investigate the application of SARS-CoV-2 IgM and IgG antibodies in diagnosis of COVID-19 infection. Method. This study enrolled a total of 178 patients at Huangshi Central Hospital from January to February 2020. Among them, 68 patients were SARS-CoV-2 infected, confirmed with nucleic acid test (NAT) and CT imaging. Nine patients were in the suspected group (NAT negative) with fever and other respiratory symptoms. 101 patients were in the control group with other diseases and negative to SARS-CoV-2 infection. After serum samples were collected, SARS-CoV-2 IgG and IgM antibodies were tested by chemiluminescence immunoassay (CLIA) for all patients. Results. The specificity of serum IgM and IgG antibodies to SARS-CoV-2 was 99.01% (100/101) and 96.04% (97/101), respectively, and the sensitivity was 88.24% (60/68) and 97.06% (66/68), respectively. The combined detection rate of SARS-CoV-2 IgM and IgG antibodies was 98.53% (67/68). Conclusion. Combined detection of serum SARS-CoV-2 IgM and IgG antibodies had better sensitivity compared with single IgM or IgG antibody testing, which can be used as an important diagnostic tool for SARS-CoV-2 infection and a screening tool of potential SARS-CoV-2 carriers in clinics, hospitals, and accredited scientific laboratories

    Optimization of extraction of chitin from procambarus clarkia shell by Box-Behnken design

    No full text
    This paper investigated the optimizing extraction processing of chitin from procambarus clarkia shell by Box-Behnken design. Firstly, four independent variables were explored in single factor experiments, namely, concentration of hydrochloric acid, soaking time, concentration of sodium hydroxide and reaction time. Then, based on the results of the above experiments, four factors and three levels experiments were planned by Box-Behnken design. According to the experimental results, we harvested a second-order polynomial equation using multiple regression analysis. In addition, the optimum extraction process of chitin of the model was obtained: concentration of HCl solution 1.54mol/L, soaking time 19.87h, concentration of NaOH solution 2.9mol/L and reaction time 3.54h. For proving the accuracy of the model, we finished the verification experiment under the following conditions: concentration of hydrochloric acid 1.5mol/L, soaking time 20h, concentration of sodium hydroxide 3mol/L and reaction time 3.5h. The actual yield of chitin reached 18.76%, which was very close to the predicted yield (18.66%) of the model. The result indicated that the optimum extraction processing of chitin was feasible and practical

    Optimization of extraction of chitin from procambarus clarkia shell by Box-Behnken design

    No full text
    This paper investigated the optimizing extraction processing of chitin from procambarus clarkia shell by Box-Behnken design. Firstly, four independent variables were explored in single factor experiments, namely, concentration of hydrochloric acid, soaking time, concentration of sodium hydroxide and reaction time. Then, based on the results of the above experiments, four factors and three levels experiments were planned by Box-Behnken design. According to the experimental results, we harvested a second-order polynomial equation using multiple regression analysis. In addition, the optimum extraction process of chitin of the model was obtained: concentration of HCl solution 1.54mol/L, soaking time 19.87h, concentration of NaOH solution 2.9mol/L and reaction time 3.54h. For proving the accuracy of the model, we finished the verification experiment under the following conditions: concentration of hydrochloric acid 1.5mol/L, soaking time 20h, concentration of sodium hydroxide 3mol/L and reaction time 3.5h. The actual yield of chitin reached 18.76%, which was very close to the predicted yield (18.66%) of the model. The result indicated that the optimum extraction processing of chitin was feasible and practical

    Vertical Vibration Characteristics of a Variable Impedance Pile Embedded in Layered Soil

    No full text
    In engineering applications, various defects such as bulging, necking, slurry crappy, and weak concrete are always observed during pile integrity testing. To provide more reasonable basis for assessing the above defects, this paper proposed simple and computationally efficient solutions to investigate the vertical vibration characteristics of a variable impedance pile embedded in layered soil. The governing equations of pile-soil system undergoing a vertical dynamic loading are built based on the plane strain model and fictitious soil pile model. By employing the Laplace transform method and impedance function transfer method, the analytical solution of the velocity response at the pile head is derived in the frequency domain. Then, the corresponding semianalytical solution in the time domain for the velocity response of a pile subjected to a semisinusoidal force applied at the pile head is obtained by adopting inverse Fourier transform and convolution theorem. Based on the presented solutions, a parametric study is conducted to study the vertical vibration characteristics of variable cross-section pile and variable modulus pile. The study gives an important insight into the evaluation of the construction quality of pile

    Characterization of Recombinant Antimicrobial Peptide BMGlv2 Heterologously Expressed in Trichoderma reesei

    No full text
    Antimicrobial peptides (AMPs) serve as alternative candidates for antibiotics and have attracted the attention of a wide range of industries for various purposes, including the prevention and treatment of piglet diarrhea in the swine industry. Escherichia coli, Salmonella, and Clostridium perfringens are the most common pathogens causing piglet diarrhea. In this study, the antimicrobial peptide gloverin2 (BMGlv2), derived from Bombyx mandarina, was explored to determine the efficient prevention effect on bacterial piglet diarrhea. BMGlv2 was heterologously expressed in Trichoderma reesei Tu6, and its antimicrobial properties against the three bacteria were characterized. The results showed that the minimum inhibitory concentrations of the peptide against E. coli ATCC 25922, S. derby ATCC 13076, and C. perfringens CVCC 2032 were 43.75, 43.75, and 21.86 μg/mL, respectively. The antimicrobial activity of BMGlv2 was not severely affected by high temperature, salt ions, and digestive enzymes. It had low hemolytic activity against rabbit red blood cells, indicating its safety for use as a feed additive. Furthermore, the measurements of the leakage of bacterial cell contents and scanning electron microscopy of C. perfringens CVCC 2032 indicated that BMGlv2 exerted antimicrobial activity by destroying the cell membrane. Overall, this study showed the heterologous expression of the antimicrobial peptide BMGlv2 in T. reesei and verified its antimicrobial properties against three common pathogenic bacteria associated with piglet diarrhea, which can provide a reference for the applications of AMPs as an alternative product in industrial agriculture

    Expression, Purification and Characterization of Chondroitinase AC II from Marine Bacterium <i>Arthrobacter</i> sp. CS01

    No full text
    Chondroitinase (ChSase), a type of glycosaminoglycan (GAG) lyase, can degrade chondroitin sulfate (CS) to unsaturate oligosaccharides, with various functional activities. In this study, ChSase AC II from a newly isolated marine bacterium Arthrobacter sp. CS01 was cloned, expressed in Pichia pastoris X33, purified, and characterized. ChSase AC II, with a molecular weight of approximately 100 kDa and a specific activity of 18.7 U/mg, showed the highest activity at 37 &#176;C and pH 6.5 and maintained stability at a broad range of pH (5&#8211;7.5) and temperature (below 35 &#176;C). The enzyme activity was increased in the presence of Mn2+ and was strongly inhibited by Hg2+. Moreover, the kinetic parameters of ChSase AC II against CS-A, CS-C, and HA were determined. TLC and ESI-MS analysis of the degradation products indicated that ChSase AC II displayed an exolytic action mode and completely hydrolyzed three substrates into oligosaccharides with low degrees of polymerization (DPs). All these features make ChSase AC II a promising candidate for the full use of GAG to produce oligosaccharides

    Multiple Resistances and Complex Mechanisms of <i>Anopheles sinensis</i> Mosquito: A Major Obstacle to Mosquito-Borne Diseases Control and Elimination in China

    No full text
    <div><p>Malaria, dengue fever, and filariasis are three of the most common mosquito-borne diseases worldwide. Malaria and lymphatic filariasis can occur as concomitant human infections while also sharing common mosquito vectors. The overall prevalence and health significance of malaria and filariasis have made them top priorities for global elimination and control programmes. Pyrethroid resistance in anopheline mosquito vectors represents a highly significant problem to malaria control worldwide. Several methods have been proposed to mitigate insecticide resistance, including rotational use of insecticides with different modes of action. <i>Anopheles sinensis</i>, an important malaria and filariasis vector in Southeast Asia, represents an interesting mosquito species for examining the consequences of long-term insecticide rotation use on resistance. We examined insecticide resistance in two <i>An. Sinensis</i> populations from central and southern China against pyrethroids, organochlorines, organophosphates, and carbamates, which are the major classes of insecticides recommended for indoor residual spray. We found that the mosquito populations were highly resistant to the four classes of insecticides. High frequency of <i>kdr</i> mutation was revealed in the central population, whereas no <i>kdr</i> mutation was detected in the southern population. The frequency of G119S mutation in the <i>ace-1</i> gene was moderate in both populations. The classification and regression trees (CART) statistical analysis found that metabolic detoxification was the most important resistance mechanism, whereas target site insensitivity of L1014 <i>kdr</i> mutation played a less important role. Our results indicate that metabolic detoxification was the dominant mechanism of resistance compared to target site insensitivity, and suggests that long-term rotational use of various insecticides has led <i>An. sinensis</i> to evolve a high insecticide resistance. This study highlights the complex network of mechanisms conferring multiple resistances to chemical insecticides in mosquito vectors and it has important implication for designing and implementing vector resistance management strategies.</p></div

    <i>kdr</i> mutation frequency of the study populations and association with resistance to pyrethroid and organochlorine insecticides.

    No full text
    <p>Note. The laboratory susceptible strain showed 100% mortality for the three insecticides and no <i>kdr</i> mutation was detected. N is the number of individuals tested. L1014F represents a mutated allele from leucine to phenylalanine at codon 1014 of the <i>para</i> sodium ion channel gene, L1014C is another mutated allele from leucine to cysteine, and L1014 is the wildtype allele. OR (odds ratio) tests the association between a particular mutation and resistance.</p><p>*, P<0.05.</p
    corecore