Structure-Mediated Excitation of Air Plasma and Silicon Plasma Expansion in Femtosecond Laser Pulses Ablation

Femtosecond laser-induced surface structures upon multiple pulses irradiation are strongly correlated with the pulse number,which in turn significantly affects successive laser-material interactions. By recording the dynamics of femtosecond laser ablation of silicon using time-resolved shadowgraphy, here we present direct visualization of the excitation of air plasma induced by the reflected laser during the second pulse irradiation.The interaction of the air plasma and silicon plasma is found to enhance the shockwave expansion induced by silicon ablation in the longitudinal direction, showing anisotropic expansion dynamics in different directions. We further demonstrate the vanishing of air plasma as the pulse number increases because of the generation of a rough surface without light focusing ability. In the scenario, the interaction of air plasma and silicon plasma disappears; the expansion of the silicon plasma and shockwave restores its original characteristic that is dominated by the laser-material coupling.The results show that the excitation of air plasma and the laser-material coupling involved in laser-induced plasma and shockwave expansion are structure mediated and dependent on the pulse number, which is of fundamental importance for deep insight into the nature of laser-material interactions during multiple pulses ablation

Fabrication of Low Roughness Gradient Nanostructured Inner Surface on an AISI 304 Stainless Steel Pipe via Ultra-Sonic Rolling Treatment (USRT)

Gradient nanostructure (GNS) has drawn great attention, owing to the unique deformation and properties that are superior to nanostructure with uniform scale. GNS is commonly fabricated via surface plastic deformation with small tips (of balls or shots) so as to produce high deformation to refine the coarse grains, but unfortunately it suffers from the deterioration of surface quality which is hard to guarantee the reliable service. Although there are mirror-finishing techniques that can greatly enhance the surface quality, the induced slight deformation is commonly unable to produce GNS of reasonable thickness. Here, we propose a method to fabricate a GNS surface layer with a substantially enhanced surface quality via ultra-sonic rolling treatment (USRT), namely, surface rolling with a roller vibrated at a frequency of 20,000 Hz. It is found that 4-pass USRT is able to produce 20–30 µm thick GNS on AISI 304 stainless steel pipe inner surface, wherein the surface quality is enhanced by one order of magnitude from the starting Ra = 3.92 µm to 0.19 µm. Processing by a roller with a high-frequency vibration is necessary for both good surface quality and the effective accumulation of heavy deformation on the surface. The flattening mechanism as well as the microstructural evolution from millimeter- to nanometer-scale for AISI 304 stainless steel is discussed

Structure-Mediated Excitation of Air Plasma and Silicon Plasma Expansion in Femtosecond Laser Pulses Ablation

Femtosecond laser-induced surface structures upon multiple pulses irradiation are strongly correlated with the pulse number,which in turn significantly affects successive laser-material interactions. By recording the dynamics of femtosecond laser ablation of silicon using time-resolved shadowgraphy, here we present direct visualization of the excitation of air plasma induced by the reflected laser during the second pulse irradiation.The interaction of the air plasma and silicon plasma is found to enhance the shockwave expansion induced by silicon ablation in the longitudinal direction, showing anisotropic expansion dynamics in different directions. We further demonstrate the vanishing of air plasma as the pulse number increases because of the generation of a rough surface without light focusing ability. In the scenario, the interaction of air plasma and silicon plasma disappears; the expansion of the silicon plasma and shockwave restores its original characteristic that is dominated by the laser-material coupling.The results show that the excitation of air plasma and the laser-material coupling involved in laser-induced plasma and shockwave expansion are structure mediated and dependent on the pulse number, which is of fundamental importance for deep insight into the nature of laser-material interactions during multiple pulses ablation

Straw Soil Conditioner Modulates Key Soil Microbes and Nutrient Dynamics across Different Maize Developmental Stages

Soil amendments may enhance crop yield and quality by increasing soil nutrient levels and improving nutrient absorption efficiency, potentially through beneficial microbial interactions. In this work, the effects of amending soil with straw-based carbon substrate (SCS), a novel biochar material, on soil nutrients, soil microbial communities, and maize yield were compared with those of soil amendment with conventional straw. The diversity and abundance of soil bacterial and fungal communities were significantly influenced by both the maize growth period and the treatment used. Regression analysis of microbial community variation indicated that Rhizobiales, Saccharimonadales, and Eurotiales were the bacterial and fungal taxa that exhibited a positive response to SCS amendment during the growth stages of maize. Members of these taxa break down organic matter to release nutrients that promote plant growth and yield. In the seedling and vegetative stages of maize growth, the abundance of Rhizobiales is positively correlated with the total nitrogen (TN) content in the soil. During the tasseling and physiological maturity stages of corn, the abundance of Saccharimonadales and Eurotiales is positively correlated with the content of total carbon (TC), total phosphorus (TP), and available phosphorus (AP) in the soil. The results suggest that specific beneficial microorganisms are recruited at different stages of maize growth to supply the nutrients required at each stage. This targeted recruitment strategy optimizes the availability of nutrients to plants and ultimately leads to higher yields. The identification of these key beneficial microorganisms may provide a theoretical basis for the targeted improvement of crop yield and soil quality. This study demonstrates that SCS amendment enhances soil nutrient content and crop yield compared with conventional straw incorporation and sheds light on the response of soil microorganisms to SCS amendment, providing valuable insights for the future implementation of this material

Enhanced Pitting Corrosion Resistance of Nanostructured AISI 304 Stainless Steel via Pipe Inner Surface Grinding Treatment

By means of a pipe’s inner surface grinding, a single-phase nanostructured austenite was formed on the surface of an AISI 304 stainless steel. The electrochemical corrosion behavior was compared with a coarse-grained counterpart of identical surface roughness. Experimental results show that the nanostructured austenite shows a higher pitting potential and a wider passivation interval than those of its coarse-grained counterpart. The enhanced corrosion resistance was attributed to the fast diffusion of Cr within the nanostructure and, hence, the formation of a thicker passive film to efficiently protect the surface against the ion attack. This work provides insights into a simple processing method to improve the surface strength and pitting resistance of stainless steel

Elastic Moduli and Mechanical Properties of Mo₅SiB₂ Single Crystals in the Mo-Si-B System

With outstanding high-temperature properties, the intermetallic Mo5SiB2 alloy is regarded as an extremely competitive ultra-temperature structural material. The maximum Young’s modulus of 398.0 GPa for single Mo5SiB2 crystals was found to be at the vertex of the [010] direction, while the minimum value of 264.0 GPa was found in the [001] direction. For hardness, the maximum value was 451.7 HV after compression at 1200 °C in the radial direction, while the maximum hardness was 437.2 HV at 1300 °C in the axial direction of {111}, showing obvious anisotropy. Under compression, the flow stresses rapidly increased and then decreased with the increase in strain, corresponding to the two different stages of work hardening and softening. An EBSD test showed that the grain orientation remained the same at different rates, but the texture was different. After high-temperature compression, the crystal underwent plastic deformation, dislocations slipped along the slip plane, and the grain rotated, so the grain texture changed from {111} to {001}