761 research outputs found

    Implications for Metallographic Cooling Rates, Derived from Fine-Scale Analytical Traverses Across Kamacite, Taenite, and Tetrataenite in the Butler Iron Meteorite

    Get PDF
    The "M-shaped" Ni concentrations across Widmanstatten patterns in iron meteorites, mesosiderites, and ordinary chondrites are commonly used to calculate cooling rates. As Ni-poor kamacite exolves from Ni-rich taenite, Ni concentrations build up at the kamacite-taenite interface because of the sluggish diffusivity of Ni. Quantitative knowledge of experimentally-determined Ni diffusivities, coupled with the shape of the M-profile, have been used to allow calculation of cooling rates that pertained at low temperatures, less than or equal to 500 C. However, determining Ni metallographic cooling rates are challenging, due to the sluggish diffusivity of Ni at low temperatures. There are three potential difficulties in using Ni cooling rates at low temperatures: (i) Ni diffusivities are typically extrapolated from higher-temperature measurements; (ii) Phase changes occur at low temperatures that may be difficult to take into account; and (iii) It appears that Ge in kamacite and taenite has continued to equilibrate (or attempted to equilibrate) at temperatures below those that formed the M-shaped Ni profile. Combining Ni measurements with those of other elements has the potential to provide a way to confirm or challenge Ni-determined cooling rates, as well as provide insight into the partitioning behaviors of elements during the cooling of iron meteorites. Despite these benefits, studies that examine elemental profiles of Ni along with other elements in iron meteorites are limited, often due to the low concentration levels of the other elements and associated analytical challenges. The Butler iron meteorite provides a good opportunity to conduct a multi-element analytical study, due to the higher concentration levels of key elements in addition to Fe and Ni. In this work, we perform combined analysis for six elements in the Butler iron to determine the relative behaviors of these elements during the evolution of iron meteorites, with implications for metallographic cooling rates

    Charge-Transfer Excitations in the Model Superconductor HgBa2_2CuO4+δ_{\bf 4+\delta}

    Full text link
    We report a Cu KK-edge resonant inelastic x-ray scattering (RIXS) study of charge-transfer excitations in the 2-8 eV range in the structurally simple compound HgBa2_2CuO4+δ_{4+\delta} at optimal doping (Tc=96.5T_{\rm c} = 96.5 K). The spectra exhibit a significant dependence on the incident photon energy which we carefully utilize to resolve a multiplet of weakly-dispersive (<0.5 < 0.5 eV) electron-hole excitations, including a mode at 2 eV. The observation of this 2 eV excitation suggests the existence of a charge-transfer pseudogap deep in the superconducting phase. Quite generally, our data demonstrate the importance of exploring the incident photon energy dependence of the RIXS cross section.Comment: 5 pages, 3 figure

    Using Dust from Asteroids as Regolith Microsamples

    Get PDF
    Meteorite science is rich with compositional indicators by which we classify parent bodies, but few sample groups are definitively linked with asteroid spectra. More robust links need to be forged between meteorites and their parent bodies to understand the composition, diversity and distribution. A major link can be sample analysis of the parent body material and comparison with meteorite data. Hayabusa, the first sample return mission of the Japanese Aerospace Exploration Agency (JAXA), was developed to rendezvous with and collect samples from asteroid Itokawa and return them to Earth. Thousands of sub-100 micron particles were recovered, apparently introduced during the spacecraft impact into the surface of the asteroid, linking the asteroid Itokawa to LL chondrites [1]. Upcoming missions Hayabusa 2 and OSIRIS-REx will collect more significant sample masses from asteroids. In all these cases, the samples are or will be a collection of regolith particles. Sample return to earth is not the only method for regolith particle analysis. Dust is present around all airless bodies, generated by micrometeorite impact into their airless surfaces, which in turn lofts regolith particles into a "cloud" around the body. The composition, flux, and size-frequency distribution of dust particles can provide significant insight into the geological evolution of airless bodies [2]. For example, the Cassini Cosmic Dust Analyzer (CDA) detected salts in Enceladus' icy plume material, providing evidence for a subsurface ocean in contact with a silicate seafloor [3]. Similar instruments have flown on the Rosetta, LADEE, and Stardust missions. Such an instrument may be of great use in obtaining the elemental, isotopic and mineralogical composition measurement of dust particles originating from asteroids without returning the samples to terrestrial laboratories. We investigated the ability of a limited sample analysis capability using a dust instrument to forge links between asteroid regolith particles and known meteorite groups. We further set limits on the number of individual particles statistically needed to robustly reproduce a bulk composition

    A Mercury Lander Mission Concept Study for the Next Decadal Survey

    Get PDF
    Mariner 10 provided our first closeup reconnaissance of Mercury during its three flybys in 1974 and 1975. MESSENGERs 20112015 orbital investigation enabled numerous discoveries, several of which led to substantial or complete changes in our fundamental understanding of the planet. Among these were the unanticipated, widespread presence of volatile elements (e.g., Na, K, S); a surface with extremely low Fe abundance whose darkening agent is likely C; a previously unknown landformhollows that may form by volatile sublimation from within rocks exposed to the harsh conditions on the surface; a history of expansive effusive and explosive volcanism; substantial radial contraction of the planet from interior cooling; offset of the dipole moment of the internal magnetic field northward from the geographic equator by ~20% of the planets radius; crustal magnetization, attributed at least in part to an ancient field; unexpected seasonal variability and relationships among exospheric species and processes; and the presence in permanently shadowed polar terrain of water ice and other volatile materials, likely to include complex organic compounds. Mercurys highly chemically reduced and unexpectedly volatile-rich composition is unique among the terrestrial planets and was not predicted by earlier hypotheses for the planets origin. As an end-member of terrestrial planet formation, Mercury holds unique clues about the original distribution of elements in the earliest stages of the Solar System and how planets (and exoplanets) form and evolve in close proximity to their host stars. The BepiColombo mission promises to expand our knowledge of this planet and to shed light on some of the mysteries revealed by the MESSENGER mission. However, several fundamental science questions raised by MESSENGERs pioneering exploration of Mercury can only be answered with in situ measurements from the planets surface

    Mixing model of Phobos' bulk elemental composition for the determination of its origin: Multivariate analysis of MMX/MEGANE data

    Full text link
    The formation process of the two Martian moons, Phobos and Deimos, is still debated with two main competing hypotheses: the capture of an asteroid or a giant impact onto Mars. In order to reveal their origin, the Martian Moons eXploration (MMX) mission by Japan Aerospace Exploration Agency (JAXA) plans to measure Phobos' elemental composition by a gamma-ray and neutron spectrometer called MEGANE. This study provides a model of Phobos' bulk elemental composition, assuming the two formation hypotheses. Using the mixing model, we established a MEGANE data analysis flow to discriminate between the formation hypotheses by multivariate analysis. The mixing model expresses the composition of Phobos in 6 key lithophile elements that will be measured by MEGANE (Fe, Si, O, Ca, Mg, and Th) as a linear mixing of two mixing components: material from Mars and material from an asteroid as represented by primitive meteorite compositions. The inversion calculation includes consideration of MEGANE's measurement errors (EPE_P) and derives the mixing ratio for a given Phobos composition, based on which the formation hypotheses are judged. For at least 65\% of the modeled compositions, MEGANE measurements will determine the origin uniquely (EPE_P = 30\%), and this increases from 74 to 87\% as EPE_P decreases from 20 to 10\%. Although the discrimination performance depends on EPE_P, the current operation plan for MEGANE predicts an instrument performance for EPE_P of 20--30\%, resulting in ~70\% discrimination between the original hypotheses. MEGANE observations can also enable the determination of the asteroid type of the captured body or the impactor. The addition of other measurements, such as MEGANE's measurements of the volatile element K, as well as observations by other MMX remote sensing instruments, will also contribute to the MMX mission's goal to constrain the origin of Phobos.Comment: 34 pages, 7 figures, accepted for publication in Icaru

    Comparison of Areas in Shadow from Imaging and Altimetry in the North Polar Region of Mercury and Implications for Polar Ice Deposits

    Get PDF
    Earth-based radar observations and results from the MESSENGER mission have provided strong evidence that permanently shadowed regions near Mercury's poles host deposits of water ice. MESSENGER's complete orbital image and topographic datasets enable Mercury's surface to be observed and modeled under an extensive range of illumination conditions. The shadowed regions of Mercury's north polar region from 65 deg N to 90 deg N were mapped by analyzing Mercury Dual Imaging System (MDIS) images and by modeling illumination with Mercury Laser Altimeter (MLA) topographic data. The two independent methods produced strong agreement in identifying shadowed areas. All large radar-bright deposits, those hosted within impact craters greater than or equal to 6 km in diameter, collocate with regions of shadow identified by both methods. However, only approximately 46% of the persistently shadowed areas determined from images and approximately 43% of the permanently shadowed areas derived from altimetry host radar-bright materials. Some sizable regions of shadow that do not host radar-bright deposits experience thermal conditions similar to those that do. The shadowed craters that lack radar-bright materials show a relation with longitude that is not related to the thermal environment, suggesting that the Earth-based radar observations of these locations may have been limited by viewing geometry, but it is also possible that water ice in these locations is insulated by anomalously thick lag deposits or that these shadowed regions do not host water ice

    Development of Improved Aerogels for Spacecraft Hypervelocity Capture

    Get PDF
    The highly successful NASA Discovery mission Stardust became the first mission to return samples to Earth from a known comet in January 2006 [1]. The samples were captured during a flyby of comet 81P/Wild2 using aerogel, a very low density, silica (SiO2)-based solid with a highly porous structure [2]. Currently, scientists around the world are studying the cometary particles returned by Stardust and reporting fascinating discoveries about the history of comets and the evolution of our solar system. Given the widely acknowledged success of the Stardust mission, additional comet sample return missions are attractive and competitive concepts for future NASA Discovery-class missions; in particular, additional comet sample return missions will allow the first laboratory studies to investigate the naturally occurring diversity among comets, a crucial scientific question for understanding not just the formation of comets but also the very nature of the early solar system. Though Stardust was highly successful, there are important lessons learned from the mission on which advances in aerogel technology can be base

    Fragmentation branching ratios of highly excited hydrocarbon molecules CnH and their cations CnH+ (n<4)

    Full text link
    We have measured fragmentation branching ratios of neutral CnH and CnH+ cations produced in high velocity (4.5 a.u) collisions between incident CnH+ cations and helium atoms. Electron capture gives rise to excited neutral species CnH and electronic excitation to excited cations CnH+. Thanks to a dedicated set-up, based on coincident detection of all fragments, the dissociation of the neutral and cationic parents were recorded separately and in a complete way. For the fragmentation of CnH, the H-loss channel is found to be dominant, as already observed by other authors. By contrast, the H-loss and C-loss channels equally dominate the two-fragment break up of CnH+ species. For these cations, we provide the first fragmentation data (n > 2). Results are also discussed in the context of astrochemistry
    • …
    corecore