Caracterización eléctrica de películas delgadas de SIO2 mediante esprectoscopia de electrones auger

Depto. de Física de MaterialesFac. de Ciencias FísicasTRUEpu

Caracterización eléctrica de películas delgadas de SIO2 mediante esprectoscopia de electrones auger

Depto. de Física de MaterialesFac. de Ciencias FísicasTRUEpu

Multilayer perceptron as inverse model in a ground-based remote sensing temperature retrieval problem

In this paper, a combustion temperature retrieval approximation for high-resolution infrared ground-based measurements has been developed based on a multilayer perceptron (MLP) technique. The introduction of a selection subset of features is mandatory due to the problems related to the high dimensionality data and the worse performance of MLPs with this high input dimensionality. Principal component analysis is used to reduce the input data dimensionality, selecting the physically important features in order to improve MLP performance. The use of a priori physical information over other methods in the chosen feature’s phase has been tested and has appeared jointly with the MLP technique as a good alternative for this problem.Publicad

Uso de realidad aumentada para facilitar la comprensión de conceptos de electromagnetismo

Jornada de Innovación Docente: resultados y estrategias, celebrada el 29 de junio de 2017 en la Universidad Carlos III de Madrid, donde se presentan algunos de los proyectos de innovación docente del curso 2016-2017

Bi-spectral infrared algorithm for cloud coverage over oceans by the jem-euso mission program

The need to monitor specific areas for different applications requires high spatial and temporal resolution. This need has led to the proliferation of ad hoc systems on board nanosatellites, drones, etc. These systems require low cost, low power consumption, and low weight. The work we present follows this trend. Specifically, this article evaluates a method to determine the cloud map from the images provided by a simple bi-spectral infrared camera within the framework of JEM-EUSO (The Joint Experiment Missions-Extrem Universe Space Observatory). This program involves different experiments whose aim is determining properties of Ultra-High Energy Cosmic Ray (UHECR) via the detection of atmospheric fluorescence light. Since some of those projects use UV instruments on board space platforms, they require knowledge of the cloudiness state in the FoV of the instrument. For that reason, some systems will include an infrared (IR) camera. This study presents a test to generate a binary cloudiness mask (CM) over the ocean, employing bi-spectral IR data. The database is created from Moderate-Resolution Imaging Spectroradiometer (MODIS) data (bands 31 and 32). The CM is based on a split-window algorithm. It uses an estimation of the brightness temperature calculated from a statistical study of an IR images database along with an ancillary sea surface temperature. This statistical procedure to obtain the estimate of the brightness temperature is one of the novel contributions of this work. The difference between the measured and estimation of the brightness temperature determines whether a pixel is cover or clear. That classification requires defining several thresholds which depend on the scenarios. The procedure for determining those thresholds is also novel. Then, the results of the algorithm are compared with the MODIS CM. The agreement is above 90%. The performance of the proposed CM is similar to that of other studies. The validation also shows that cloud edges concentrate the vast majority of discrepancies with the MODIS CM. The relatively high accuracy of the algorithm is a relevant result for the JEM-EUSO program. Further work will combine the proposed algorithm with complementary studies in the framework of JEM-EUSO to reinforce the CM above the cloud edges.This research was funded by MADRID GOVERNMENT (Comunidad de Madrid;Spain), PEJ-2018-AI_TIC-11476 and by the SPANISH MINISTRY (MICINN), RTI2018-099825-B-C33. The APC was funded by the MADRID GOVERNMENT, EPUC3M14

A Hardware/Software Platform to Acquire Bioelectrical Signals. A Case Study: Characterizing Computer Access through Attention

This paper describes a hardware/software platform to acquire human body signals. In the field of physiological computing it is desirable to have a system that allows the synchronized acquisition of signals coming from different sources. Here is described how to unify the whole process of acquiring signals from both customized hardware and low cost commercial devices such as Neurosky’s mindwave. A case study using this platform is also shown: studying the feasibility of using sustained attention to access a computer. In order to do that brain activity was measured using Neurosky’s mindwave. The participants in this study were asked to keep their attention high/low for as long as possible during several trials. Experimentation was performed by 7 normally developed subjects and 3 people with cerebral palsy (CP). Our preliminary work shows that 60% of participants might be potential users of this technology. Eventually, modulating the attention to access a communication board needs a scanning period greater than 5.76s

Métodos audiovisuales para la motivación y el aprendizaje de economía y administración pública

El proyecto pretende, como objetivo general, hacer más comprensible y atractivas las materias de economía y administración pública a través de la realización de videos en los que se desarrollen algunos temas de las mismas desde el punto de vista teórico y práctico, y utilizando como medio vehicular películas basadas en hechos reales. Esto permitirá utilizar también noticias de prensa sobre estos hechos y acercar la teoría a la práctica

Immunomodulatory effects of testosterone and letrozole during Plasmodium berghei ANKA infection

IntroductionMalaria is one of the leading health problems globally. Plasmodium infection causes pronounced sexual dimorphism, and the lethality and severity are more remarkable in males than in females. To study the role of testosterone in the susceptibility and mortality of males in malaria, it is common to increase its concentration. However, this strategy does not consider the enzyme CYP19A1 aromatase, which can transform it into oestrogens.MethodsTo avoid the interference of oestrogens, we inhibited in vivo CYP19A1 aromatase with letrozole and increased the testosterone level by exogen administration before infection with Plasmodium berghei ANKA. We measured the impact on free testosterone, 17β-oestradiol and dehydroepiandrosterone levels in plasma; additionally, we evaluated parasitaemia, body temperature, body mass, glucose levels and haemoglobin concentration. Furthermore, we evaluated the effects of testosterone on the immune response; we quantified the CD3+/CD4+, CD3+/CD8+, CD19+, Mac-3+ and NK cells in the spleen and the plasma concentrations of the cytokines IL-2, IL-4, IL-6, IFN-, IL-10, TNF-α and IL-17A. Finally, we quantified the levels of antibodies.ResultsWe found that mice treated with the combination of letrozole and testosterone and infected with Plasmodium berghei ANKA had increased concentrations of free testosterone and DHEA but decreased levels of 17β-oestradiol. As a result, parasitaemia increased, leading to severe anaemia. Interestingly, testosterone increased temperature and decreased glucose concentration as a possible testosterone-mediated regulatory mechanism. The severity of symptomatology was related to critical immunomodulatory effects generated by free testosterone; it selectively increased CD3+CD8+ T and CD19+ cells but decreased Mac-3+. Remarkably, it reduced IL-17A concentration and increased IL-4 and TNF-α. Finally, it increased IgG1 levels and the IgG1/IgG2a ratio. In conclusion, free testosterone plays an essential role in pathogenesis in male mice by increasing CD8+ and decreasing Mac3+ cells and mainly reducing IL-17A levels, which is critical in the development of anaemia. Our results are important for understanding the mechanisms that regulate the exacerbated inflammatory response in infectious diseases and would be useful for the future development of alternative therapies to reduce the mortality generated by inflammatory processes

Hardware timestamping for image acquisition system based on FlexRIO and IEEE 1588 v2 Standard

Current fusion devices consist of multiple diagnostics and hundreds or even thousands of signals. This situation forces on multiple occasions to use distributed data acquisition systems as the best approach. In this type of distributed systems, one of the most important issues is the synchronization between signals, so that it is possible to have a temporal correlation as accurate as possible between the acquired samples of all channels. In last decades, many fusion devices use different types of video cameras to provide inside views of the vessel during operations and to monitor plasma behavior. The synchronization between each video frame and the rest of the different signals acquired from any other diagnostics is essential in order to know correctly the plasma evolution, since it is possible to analyze jointly all the information having accurate knowledge of their temporal correlation. The developed system described in this paper allows timestamping image frames in a real-time acquisition and processing system using 1588 clock distribution. The system has been implemented using FPGA based devices together with a 1588 synchronized timing card (see Fig.1). The solution is based on a previous system [1] that allows image acquisition and real-time image processing based on PXIe technology. This architecture is fully compatible with the ITER Fast Controllers [2] and offers integration with EPICS to control and monitor the entire system. However, this set-up is not able to timestamp the frames acquired since the frame grabber module does not present any type of timing input (IRIG-B, GPS, PTP). To solve this lack, an IEEE1588 PXI timing device its used to provide an accurate way to synchronize distributed data acquisition systems using the Precision Time Protocol (PTP) IEEE 1588 2008 standard. This local timing device can be connected to a master clock device for global synchronization. The timing device has a buffer timestamp for each PXI trigger line and requires tha- a software application assigns each frame the corresponding timestamp. The previous action is critical and cannot be achieved if the frame rate is high. To solve this problem, it has been designed a solution that distributes the clock from the IEEE 1588 timing card to all FlexRIO devices [3]. This solution uses two PXI trigger lines that provide the capacity to assign timestamps to every frame acquired and register events by hardware in a deterministic way. The system provides a solution for timestamping frames to synchronize them with the rest of the different signals