65 research outputs found
ZnO/ionic liquid catalyzed biodiesel production from renewable and waste lipids as feedstocks
A new protocol for biodiesel production is proposed, based on a binary ZnO/TBAI (TBAI = tetrabutylammonium iodide) catalytic system. Zinc oxide acts as a heterogeneous, bifunctional Lewis acid/base catalyst, while TBAI plays the role of phase transfer agent. Being composed by the bulk form powders, the whole catalyst system proved to be easy to use, without requiring nano-structuration or tedious and costly preparation or pre-activation procedures. In addition, due to the amphoteric properties of ZnO, the catalyst can simultaneously promote transesterification and esterification processes, thus becoming applicable to common vegetable oils (e.g., soybean, jatropha, linseed, etc.) and animal fats (lard and fish oil), but also to waste lipids such as cooking oils (WCOs), highly acidic lipids from oil industry processing, and lipid fractions of municipal sewage sludge. Reusability of the catalyst system together with kinetic (Ea) and thermodynamic parameters of activation (∆G‡ and ∆H‡) are also studied for transesterification reaction
Valorization of cigarette butts for synthesis of levulinic acid as top value-added chemicals
Unprecedented in the literature, levulinic acid (LA), one of the top value-added intermediates of chemical industry, is obtained from cigarette butts as cellulose feedstock by means of a one-pot hydrothermal process carried out at 200 °C for 2 h and catalysed by phosphoric acid. The protocol avoids the use of more aggressive and toxic H2SO4 and HCl, that are generally employed on several cellulose sources (e.g. sludge paper), thus minimizing corrosion phenomena of plants. Neither chemical pre-treatment of butts nor specific purification procedure of LA are required. Notably, by simply modifying acid catalyst (e.g. using CH3COOH), another top value-added fine chemical such as 5-hydroxymethylfuraldehyde (HMF) is obtained, thus widening the scope of the method. Being cigarette filters a waste available in quantities of megatonnes per year, they represent an unlimited at no cost source of cellulose, thus enabling the up-scale to an industrial level of LA production
Electronic nose and isotope ratio mass spectrometry in combination with chemometrics for the characterization of the geographical origin of Italian sweet cherries
Sweet cherries from two Italian regions, Apulia and Emilia Romagna, were analysed using electronic nose
(EN) and isotope ratio mass spectrometry (IRMS), with the aim of distinguishing them according to their
geographic origin. The data were elaborated by statistical techniques, examining the EN and IRMS datasets
both separately and in combination. Preliminary exploratory overviews were performed and then
linear discriminant analyses (LDA) were used for classification. Regarding EN, different approaches for
variable selection were tested, and the most suitable strategies were highlighted. The LDA classification
results were expressed in terms of recognition and prediction abilities and it was found that both EN and
IRMS performed well, with IRMS showing better cross-validated prediction ability (91.0%); the EN–IRMS
combination gave slightly better results (92.3%). In order to validate the final results, the models were
tested using an external set of samples with excellent results
Concerning synthesis of new biobased polycarbonates with curcumin in replacement of bisphenol a and recycled diphenyl carbonate as example of circular economy
Curcumin (CM) is a natural polyphenol well-known for its antioxidant and pharmaceutical properties, that can represent a renewable alternative to bisphenol A (BPA) for the synthesis of biobased polycarbonates (PC). In the presented strategy, preparation of the CM-based PC was coupled with chemical recycling of the fossil-based BPA polycarbonate (BPA-PC) conducting a two-steps trans-polymerization that replaces BPA monomer with CM or its tetrahydrogenated colorless product (THCM). In the first step of synthetic strategy, depolymerization of commercial BPA-PC was carried out with phenol as nucleophile, according to our previous procedure based on zinc derivatives and ionic liquids as catalysts, thus producing quantitatively diphenyl carbonate (DPC) e BPA. In the second step, DPC underwent a melt transesterification with CM or THCM monomers affording the corresponding bio-based polycarbonates, CM-PC and THCM-PC, respectively. THCM was prepared by reducing natural bis-phenol with cyclohexene as a hydrogen donor and characterized by 1H-NMR and MS techniques. Polymerization reactions were monitored by infrared spectroscopy and average molecular weights and dispersity of the two biobased polymers THCM-PC and CM-PC were determined by means of gel permeation chromatography (GPC). Optical properties of the prepared polymers were also measured
Multifunctional halloysite and hectorite catalysts for effective transformation of biomass to biodiesel
Halloysite surface was modified with tetrabutylammonium iodide, and then the obtained nanomaterial was used
as support for ZnO nanoparticles. After characterization, the nanomaterial was used as a catalyst for fatty acid
methyl esters (FAMEs) production. The recyclability of the nanomaterial was also investigated, and the optimization
of reaction conditions by the design of experiments approach was performed as well. In addition, the
synthesized nanomaterial was tested as a catalyst for FAME production from a series of waste lipids affording
biodiesel in moderate to good yields (35–95%), depending on the matrix. To fully exploit the feasibility of clay
minerals as catalysts in biodiesel formation, a screening of different clays and clay minerals with different
morphologies and compositions, such as sepiolite, palygorskite, bentonite, and hectorite was also performed in
the esterification of FFAs (a mixture of 1:1 palmitic and stearic acids). Finally, hectorite, chosen as a model of 2:1
clay minerals, was covalently modified, and tested as a catalyst in the esterification of FFAs
- …