173 research outputs found

    First evidence of contourite drifts in the north-western sicilian active continental margin (Southern tyrrhenian sea)

    Get PDF
    We present the results of an integrated geomorphological and seismo-stratigraphic study based on high resolution marine data acquired in the north-western Sicilian continental margin. We document for the first time five contourite drifts (marked as EM1a, EM2b, EM2, EM3a, and EM3b), located in the continental slope at depths between ca. 400 and 1500 m. EM1a,b have been interpreted as elongated mounded drifts. EM1a,b are ca. 3 km long, 1.3 km wide, and have a maximum thickness of 36 m in their center that thins northwards, while EM1b is smaller with a thickness up to 24 m. They are internally characterized by mounded seismic packages dominated by continuous and parallel reflectors. EM2 is located in the upper slope at a depth of ca. 1470 m, and it is ca. 9.3 km long, more than 3.9 km wide, and has a maximum thickness of ca. 65 m. It consists of an internal aggradational stacking pattern with elongated mounded packages of continuous, moderate to high amplitude seismic reflectors. EM2 is internally composed by a mix of contourite deposits (Holocene) interbedded with turbiditic and/or mass flow deposits. EM1a,b and EM2 are deposited at the top of an erosional truncation aged at 11.5 ka, so they mostly formed during the Holocene. EM3a,b are ca. 16 km long, more than 6.7 km wide, and have a thickness up to 350 m. Both EM2 and EM3a,b have been interpreted as sheeted drift due to their morphology and seismic features. The spatial distribution of the contourite drifts suggests that the drifts are likely generated by the interaction of the LIW, and deep Tyrrhenian water (TDW) on the seafloor, playing an important role in the shaping this continental margin since the late Pleistocene-Holocene. The results may help to understand the deep oceanic processes affecting the north-western Sicilian continental margin

    Submarine mass movements around the Iberian Peninsula. The building of continental margins through hazardous processes

    Get PDF
    Submarine mass movements, such as those which occur in all environments in every ocean of the world, are widely distributed across the Iberian continental margins. A lack of consistent data from various areas around the Iberian Peninsula makes it difficult to precisely understand their role in the sedimentary record. However, all the studies carried out over the past two decades reveal that they are a recurrent and widespread sedimentary process that may represent a significant geohazard. The majority of submarine mass movements observed in both the Mediterranean and Atlantic margins of the Iberian Peninsula have been generically identified as Mass Transport Deposits, but debris flows, slides, slumps and turbidites are common. Only a few remarkable examples involve huge volumes of sediment covering large areas (such as ~500 km3 and ~6x104 km2 ), but more moderate deposits (<200 km2 ) are frequently found on the seafloor or embedded in the sedimentary sequences, building margins and basins

    Morphology of the submerged Ferdinandea Island, the ‘Neverland’ of the Sicily Channel (central Mediterranean Sea)

    Get PDF
    We present the bathy-morphological map at a scale of 1: 50,000 of the area around the submerged Ferdinandea Island, the ‘Neverland’ of the Sicily Channel (central Mediterranean Sea). We investigate an area of 100 km2, between 10 and 350 m, which is part of a triangular morphological high, 360 km2 wide, representing the SE-wards prolongation of the Adventure Bank. The study is based on the morphometric analysis based on high resolution multibeam, and sub-bottom CHIRP profiles collected in 2015. The area around the remains of Ferdinandea Island is morphologically shaped by the interplay between volcanic, tectonic, fluid seepage, and oceanographic processes. Since the study area is considered a hot spot of biodiversity affected by maritime traffic (especially in Ferdinandea Channel) and hosting communication pipelines, this map provides insights both for habitat mapping purposes and preliminary marine geohazard assessment due to the occurrence of historically active submarine volcanoes, pockmarks, and mass transport deposits

    Multibeam bathymetry of Lipari island

    Get PDF
    Very high resolution bathymetric map obtained through multibeam echo-sounders data are crucial to generate accurate Digital Elevation Terrain Models from which the morphological setting of active volcanic areas can be analyzed in detail. Here we show and discuss the main results from the first multibeam bathymetric survey performed in shallow-waters around the Island of Lipari, the largest and the most densely populated of the Aeolian islands (Southern Italy). Data have been collected in the depth range of 0.1-150 m and complete the already existent high-resolution multibeam bathymetry realized between 100 and 1300 m water depth. The new ultra-high resolution bathymetric maps at 0.1-0.5 m provide new insights on the shallow seafloor of Lipari, allowing to detail a large spectrum of volcanic, erosive-depositional and anthropic features. Moreover, the presented data allow outlining the recent morphological evolution of the shallow coastal sector of this active volcanic island, indicating the presence of potential geo-hazard factors in shallow waters

    Basin-scale interaction between post-LGM faulting and morpho-sedimentary processes in the S. Eufemia Gulf (Southern Tyrrhenian Sea)

    Get PDF
    The integrated interpretation of high-resolution multibeam bathymetry, seismic profiles and backscatter data in the S. Eufemia Gulf (SEG; Calabro-Tyrrhenian continental margin, south-eastern Tyrrhenian Sea) documents the relationship between postglacial fault activity and morpho-sedimentary processes. Three systems of active normal faults that affect the seafloor or the shallow subsurface, have been identified: 1) the S. Eufemia fault system located on the continental shelf with fault planes mainly oriented N26E-N40E; 2) the offshore fault system that lies on the continental slope off Capo Suvero with fault planes mainly oriented N28E-N60E; 3) the Angitola Canyon fault system located on the seafloor adjacent to the canyon having fault planes oriented N60EN85E. The faults produce a belt of linear escarpments with vertical displacement varying from a few decimeters to about 12 m. One of the most prominent active structures is the fault F1 with the highest fault length (about 9.5 km). Two main segments of this fault are identified: a segment characterised by seafloor deformation with metric slip affecting Holocene deposits; a segment characterised by folding of the seafloor. A combined tectonostratigraphic model of an extensional fault propagation fold is proposed here to explain such different deformation.In addition to the seabed escarpments produced by fault deformation, in the SEG, a strong control of fault activity on recent sedimentary processes is clearly observed. For example, canyons and channels frequently change their course in response to their interaction with main tectonic structures. Moreover, the upper branch of the Angitola Canyon shows straight flanks determined by fault scarps. Tectonics also determined different sediment accumulation rates and types of sedimentation (e.g., the accumulation of hanging wall turbidite deposits and the development of contourite deposits around the Maida Ridge). Furthermore, the distribution of landslides is often connected to main fault scarps and fluids are locally confined in the hanging wall side of faults and can escape at the seabed, generating pockmarks aligned along their footwall

    An Integrated Multiscale Method for the Characterisation of Active Faults in Offshore Areas. The Case of Sant\u2019Eufemia Gulf (Offshore Calabria, Italy)

    Get PDF
    Diagnostic morphological features (e.g., rectilinear seafloor scarps) and lateral offsets of the Upper Quaternary deposits are used to infer active faults in offshore areas. Although they deform a significant seafloor region, the active faults are not necessarily capable of producing large earthquakes as they correspond to shallow structures formed in response to local stresses. We present a multiscale approach to reconstruct the structural pattern in offshore areas and distinguish between shallow, non-seismogenic, active faults, and deep blind faults, potentially associated with large seismic moment release. The approach is based on the interpretation of marine seismic reflection data and quantitative morphometric analysis of multibeam bathymetry, and tested on the Sant\u2019Eufemia Gulf (southeastern Tyrrhenian Sea). Data highlights the occurrence of three major tectonic events since the Late Miocene. The first extensional or transtensional phase occurred during the Late Miocene. Since the Early Pliocene, a right-lateral transpressional tectonic event caused the positive inversion of deep (&gt;3&nbsp;km) tectonic features, and the formation of NE-SW faults in the central sector of the gulf. Also, NNE-SSW to NE-SW trending anticlines (e.g., Maida Ridge) developed in the eastern part of the area. Since the Early Pleistocene (Calabrian), shallow (&lt;1.5&nbsp;km) NNE-SSW oriented structures formed in a left-lateral transtensional regime. The new results integrated with previous literature indicates that the Late Miocene to Recent transpressional/transtensional structures developed in an 3cE-W oriented main displacement zone that extends from the Sant\u2019Eufemia Gulf to the Squillace Basin (Ionian offshore), and likely represents the upper plate response to a tear fault of the lower plate. The quantitative morphometric analysis of the study area and the bathymetric analysis of the Angitola Canyon indicate that NNE-SSW to NE-SW trending anticlines were negatively reactivated during the last tectonic phase. We also suggest that the deep structure below the Maida Ridge may correspond to the seismogenic source of the large magnitude earthquake that struck the western Calabrian region in 1905. The multiscale approach contributes to understanding the tectonic imprint of active faults from different hierarchical orders and the geometry of seismogenic faults developed in a lithospheric strike-slip zone orthogonal to the Calabrian Arc

    Mid-to-late Holocene upper slope contourite deposits off Capo Vaticano (Mediterranean Sea): High-resolution record of contourite cyclicity, bottom current variability and sandy facies

    Get PDF
    none13noThe upper continental slope offshore Capo Vaticano (southern Tyrrhenian Sea) is characterized by a contourite depositional system with well-developed elongated sediment drifts. This system is related to a northward paleo-bottom current, similar to the present-day modified-Levantine Intermediate Water (modified-LIW) flowing from the Messina Strait. In this work, we show results from an integrated analysis of descriptive oceanography, high-resolution seismic profiles and core data (i.e., grain size, foraminiferal assemblages, tephrostratigraphy and AMS radiocarbon dating) collected from the crest and moat sectors of drift deposits. The studied succession formed since the mid Holocene, under the action of the modified-LIW and the stratigraphic architecture indicates an upslope migration of the moat and rather stable position of the crest sector. Grain-size features recorded from two sediment cores indicate the occurrence of a succession of complete bi-gradational sand-rich contourite sequences. Sandy facies were observed both as lag deposits formed in active moat channel and as coarser intervals of bi-gradational sequences forming drift deposits close to its crest. Their occurrence would highlight that upper slope environments impacted by intermediate water masses and proximal to sandy sources may represent favorable settings for accumulation of sandy sediment. The moat sector is characterized by a more complex stratigraphic record, where either moat sedimentation or lateral deposition of finer sediment occur, suggesting that further investigation is required to better understand this complex element of contourite systems. Based on available age information, some of the bi-gradational sequences probably formed during the Dark Age Cold Period, providing example of a small-scale cyclicity of contourite deposition, likely related to short-term (possibly multicentennial scale) fluctuations of the paleo modified-LIW. According to age constraints and analysis of foraminiferal assemblages, these fluctuations were likely governed by climate variations, with a weaker activity during warmer periods and faster currents during colder events.openMartorelli E., Bosman A., Casalbore D., Chiocci F., Conte A.M., Di Bella L., Ercilla G., Falcini F., Falco P., Frezza V., Gaglianone G., Giaccio B., Mancini M.Martorelli, E.; Bosman, A.; Casalbore, D.; Chiocci, F.; Conte, A. M.; Di Bella, L.; Ercilla, G.; Falcini, F.; Falco, P.; Frezza, V.; Gaglianone, G.; Giaccio, B.; Mancini, M

    The Guadiaro-Baños contourite drifts (SW Mediterranean). A geotechnical approach to stability analysis

    Get PDF
    Two Quaternary plastered contourite drifts, with terraced and low-mounded morphologies, make up the continental slope and base-of-slope in the northwestern Alboran Sea, respectively, between the Guadiaro and Baños turbidite systems, close to the Strait of Gibraltar. Considering their significant lateral extent, the link between the contourite drift deposits and landslides may be particularly important for hazard assessment. The physical properties, composition and geometry of contourite drifts have been proposed as key factors in slope stability, although this relationship still needs to be better constrained. In this work, new in-situ geotechnical data (cone penetration tests; CPTu) has been combined with morphostratigraphic, sedimentological, and (laboratory) geotechnical properties to determine the stability of the Guadiaro-Baños drifts. For the depositional domains of both drifts, the resulting sedimentary and geotechnical model describes low-plasticity granular and silty sands on the erosive terraced domain that evolve seawards to silty and silty-clay deposits with a higher plasticity and uniform geomechanical properties. For the shallower coarse-grained contourite sediments, the cohesion (c') and internal friction angle (ϕ') values are 0–9 kPa and 46–30°, respectively, whereas for the distal fine contourites the undrained shear strength gradient (∇Su) is 2 kPa/m. These properties allow us to establish high factors of safety for all the scenarios considered, including seismic loading. Slope failure may be triggered in the unlikely event that there is seismic acceleration of PGA > 0.19, although no potential glide planes have been observed within the first 20 m below the seafloor. This suggests that the contourite drifts studied tend to resist failure better than others with similar sedimentary characteristics. The interplay of several processes is proposed to explain the enhanced undrained shear strength: 1) the geometry of the drifts, defined by an upper contouritic terrace and lower low-mounded shapes; 2) recurrent low-intensity earthquakes with insufficient energy to trigger landslides, favouring increased strength due to dynamic compaction; and 3) cyclic loading induced by solitons/internal waves acting on the sediment.En prens

    Geohazard features of the Tyrrhenian Calabria

    Get PDF
    This paper accompanies the Maps of Geohazard features of the Cilento and the Calabro-Tyrrhenian continental margin in the southern Tyrrhenian Sea (Italy). The main geohazard-related features were derived from extensive seafloor mapping through the collection of high-resolution multibeam data acquired during several oceanographic cruises. They encompass many fluids seepage features, fault scarps, landslides scars, gullies, channels, and canyons. Hazards related to coastal landslides and shelf-indenting canyons are very high in these sectors (especially in southern Calabria) due to active seismicity coupled with rapid uplift, high sedimentation rates and narrow or totally absent continental shelf, thus promoting a direct connection between steep slopes and coastal areas. In this setting, mass-wasting features can directly impact coastal or submarine infrastructures or indirectly create local tsunami waves, as observed in historical times. Moreover, this physiographic setting of the margin facilitates the transfer of marine litter toward deep-sea areas

    Understanding the complex geomorphology of a deep sea area affected by continental tectonic indentation: the case of the Gulf of Vera (Western Mediterranean)

    Get PDF
    We present a multidisciplinary study of morphology, stratigraphy, sedimentology, tectonic structure, and physical oceanography to report that the complex geomorphology of the Palomares continental margin and adjacent Algerian abyssal plain (i.e., Gulf of Vera, Western Mediterranean), is the result of the sedimentary response to the Aguilas Arc continental tectonic indentation in the Eurasian–Africa plate collision. The inden tation is imprinted on the basement of the margin with elongated metamorphic antiforms that are pierced by igneous bodies, and synforms that accommodate the deformation and create a complex physiography. The basement is partially covered by Upper Miocene deposits sealed by the regional Messinian Erosive Surface characterized by palaeocanyons that carve the modern margin. These deposits and outcropping basement highs are then covered and shaped by Plio-Quaternary contourites formed under the action of the Light Intermediate and Dense Deep Mediterranean bottom currents. Even though bottom currents are responsible for the primary sedimentation that shapes the margin, 97% of this region's seafloor is affected by mass-movements that modified contourite sediments by eroding, deforming, faulting, sliding, and depositing sediments. Mass-movement processes have resulted in the formation of recurrent mass-flow deposits, an enlargement of the submarine canyons and gully incisions, and basin-scale gravitational slides spreading above the Messinian Salinity Crisis salt layer. The Polopo, Aguilas and Gata slides are characterized by an extensional upslope domain that shapes the continental margin, and by a downslope contractional domain that shapes the abyssal plain with diapirs piercing (hemi)pelagites/sheet-like turbidites creating a seafloor dotted by numerous crests. The mass movements were mostly triggered by the interplay of the continental tectonic indentation of the Aguilas Arc with sedimentological factors over time. The indentation, which involves the progressively southeastward tectonic tilting of the whole land-sea region, likely generated a quasi-continuous oversteepening of the entire margin, thus reducing the stability of the contourites. In addition, tectonic tilting and subsidence of the abyssal plain favoured the flow of the underlying Messinian Salinity Crisis salt layer, contributing to the gravitational instability of the overlying sediments over large areas of the margin and abyssal plain
    • …
    corecore