LAND APPLICATION OF SWINE WASTE: REGULATION AND PRODUCER PRACTICES IN OKLAHOMA

Livestock Production/Industries,

Prediction of low frequency vibration and sound propagation through reinforced concrete structures

Prediction of low frequency sound fields generated in buildings by internal sources as machines or external sources such as road or rail traffic is a difficult task. Assuming that the source is well known, predictions are generally based on the Finite Element Method (FEM), which is used to model building structures and vibration and sound fields, but other hybrid or coupling methods also can be used. In general, these methods are too much time consuming and provide results which are reliable only below 100-150 Hz. Reliability at higher frequencies requires much larger models. It is, thus, important to develop simpler methods to be used with confidence by acousticians and other consultants. In the present paper a method for prediction of vibration propagation to building slabs based on the use of simplified transfer functions between fundamental joints of the structure is presented. The method was developed numerically for traditional multi-storey building with reinforced concrete slabs supported by reinforced concrete beams and columns and also was experimentally validated. The method can be used together with theoretical modal analysis to predict sound fields in dwellings

Caracterização da propagação de vibração através de estruturas de edifícios de betão armado

Este artigo descreve os parâmetros que controlam a propagação da vibração através de estruturas de edifícios de betão armado para frequências abaixo de 200 Hz. A influência das propriedades dos materiais e das dimensões dos elementos estruturais foi avaliada com modelos de elementos finitos validados experimentalmente, considerando cinco tipos de funções de transferência de aceleração: i) da fundação para o primeiro piso; ii) entre pisos intermédios; iii) do último piso para a cobertura; iv) entre troços do mesmo piso intermédio; e v) entre troços da cobertura. Os resultados mostram que a transmissão de vibração depende não tanto do número de pisos mas mais de parâmetros como a espessura da laje, no caso da transmissão da vibração num pavimento, ou a esbelteza dos pilares, no caso da propagação de vibração das fundações para o primeiro piso. Observa-se que, apesar da amplitude de vibração ser maior para elementos estruturais mais flexíveis, os elementos mais rígidos transmitem efectivamente mais energia devido a um menor efeito dissipativo. Os resultados também mostram que a atenuação piso-a-piso é aproximadamente constante para todos os pisos excepto a cobertura, onde a atenuação diminui por via da redução do número de caminhos de dissipação de energia.info:eu-repo/semantics/publishedVersio

Cateterização venosa central guiada por ultrassom --- abordagem ‘‘Syringe-Free’’

Background and objectives Central venous catheterization of the internal jugular vein is a commonly performed invasive procedure associated with a significant morbidity and even mortality. Ultrasound-guided methods have shown to significantly improve the success of the technique and are recommended by various scientific societies, including the American Society of Anesthesiologists. The aim of this report is to describe an innovative ultrasound-guided central line placement of the internal jugular vein. Technique The authors describe an innovative ultrasound-guided central line placement of the internal jugular vein based on an oblique approach – the “Syringe-Free” approach. This technique allows immediate progression of the guide wire in the venous lumen, while maintaining a real-time continuous ultrasound image. Conclusions The described method adds to the traditional oblique technique the possibility of achieving a continuous real-time ultrasound-guided venipuncture and a guide wire insertion that does not need removing the probe from the puncture field, while having a single operator performing the whole procedure

Using magnetic nanoparticles to probe protein damage in ferritin caused by freeze concentration

We demonstrate a method for monitoring the damage caused to a protein during freeze-thawing in the presence of glycerol, a cryo-protectant. For this work we synthesized magnetite nanoparticles doped with 2.5% cobalt inside the protein ferritin (CMF), dissolved them in different concentration glycerol solutions and measured their magnetization after freezing in a high applied field (5 T). As the temperature was raised, a step-like decrease in the sample magnetization was observed, corresponding to the onset of Brownian relaxation as the viscosity of the freeze-concentrated glycerol solution decreased. The position of the step reveals changes to the protein hydrodynamic radius that we attribute to protein unfolding, while its height depends on how much protein is trapped by ice during freeze concentration. Changes to the protein hydrodynamic radius are confirmed by dynamic light scattering (DLS) measurements, but unlike DLS, the magnetic measurements can provide hydrodynamic data while the solution remains mainly frozen

A Comparison of Phycocyanins from Three Different Species of Cyanobacteria Employing Resonance-Enhanced Coherent Anti-Stokes Raman Spectroscopy

Resonance-enhanced coherent anti-Stokes Raman spectra are recorded for monomers and trimers of phycocyanin from three different cyanobacteria: Westiellopsis prolifica, Mastigocladus laminosus and Spirulina platensis. It is shown that upon aggregation from monomer to trimer the electronic structures of both the α84 and β84 chromophores are changed. The spectra of the trimers originating from S. platensis and M. laminosus are very similar to each other, but distinctly different from the spectrum of W. prolifica

Prediction of low frequency sound fields in buildings near railway lines

The design of new buildings in the vicinity of railway lines must consider protection against noise and vibrations induced by railway traffic. However, the prediction methods available involve heavy numerical models which have frequency limitations. In this paper a prediction method combining finite elements (FEM) with natural mode analysis is presented for use in reinforced concrete buildings with heavy walls. The method considers 2D FEM models of the railway, ground and buildings to identify the transfer function of vibration from the railway to building foundations. Also 3D models of the buildings are considered to identify the transfer functions of vibration from foundations to walls and floors. Finally, as the impedance of heavy walls and floors is much higher than the acoustic impedance of air, the numerically assessed vibration fields of walls and floors are used to calculate sound fields in rooms by means of natural mode analysis. A set of in situ measurements were made in two different situations in order to calibrate the prediction method and also to identify the factors which most affect vibration and sound transmission