128 research outputs found
Highly efficient and reusable CNT supported iron(II) catalyst for microwave assisted alcohol oxidation
The highly efficient eco-friendly synthesis of ketones (yields over 99%) from secondary alcohols is achieved by combination of [FeCl2{eta(3)-HC(pz)(3)}] (pz = pyrazol-1-yl) supported on functionalized multi-walled carbon nanotubes and microwave irradiation, in a solvent-free medium. The carbon homoscorpionate iron(II) complex is the first one of this class to be used as catalyst for the oxidation of alcohols
Commercial Gold Complexes Supported on Functionalised Carbon Materials as Efficient Catalysts for the Direct Oxidation of Ethane to Acetic Acid
UIDB/00100/2020 UIDP/00100/2020 LA/P/0056/2020 IST-ID/119/2018 SFRH/BD/146426/2019 CEEC-INST/00102/2018 UIDB/50006/2020 UIDP/50006/2020 Base-UIDB/50020/2020 Programmatic-UIDP/50020/2020The single-pot efficient oxidation of ethane to acetic acid catalysed by Au(I) or Au(III) compounds, chlorotriphenylphosphinegold(I) (1), chlorotrimethylphosphinegold(I) (2), 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidenegold(I) chloride (3), dichloro(2-pyridinecarboxylato)gold(III) (4), homogenous and supported on different carbon materials: activated carbon (AC), multi-walled carbon nanotubes (CNT) and carbon xerogel (CX), oxidised with nitric acid followed by treatment with NaOH (-ox-Na), is reported. The reactions were performed in water/acetonitrile. The materials were selective for the production of acetic acid, with no trace of by-products being detected. The best homogenous catalysts were complexes 2 and 3 which showed the highest ethane conversion and an acetic acid yield of ca. 21%, followed by 4 and 1. The heterogenised materials showed much better activity than the homogenous counterparts, with acetic acid yields up to 41.4% for 4@CNT-ox-Na, and remarkable selectivity (with acetic acid being the only product detected). The heterogenised catalysts with the best results were reused up to five cycles, with no significant loss of activity, and maintaining high selectivity for acetic acid. 4@CNT-ox-Na showed not only the best catalytic activity but also the best stability during the recycling runs.publishersversionpublishe
Kinetic regularities, catalyst deactivation and reactivation
Funding text 1 The research is funded from Ministry of Education and Science of the Russian Federation Program No. 075–03–2021–287/6 (Russia). Funding text 2 XPS measurements were carried out at the Central laboratories of Tomsk Polytechnic University (Analytical Center). HRTEM was carried out at the Innovation centre for Nanomaterials and Nanotechnologies of Tomsk Polytechnic University. The ICP-OES analysis was carried out using the core facilities of “Physics and Chemical methods of analysis” of Tomsk Polytechnic University. Fundação para a Ciência e a Tecnologia for Scientific Employment Stimulus Institutional Call (CEECINST/00102/2018), UIDB/50006/2020 and UIDP/50006/2020 (LAQV), UIDB/00100/2020 and UIDP/00100/2020 (Centro de Química Estrutural).Betulin, being a pentacyclic triterpene alcohol and an extractive from birch bark, along with its oxo-derivatives, has a broad range of physiological properties of interest for synthesis of pharmaceuticals. Instead of oxidizing betulin with strong and toxic oxidizing agents the present study shows a possibility of using liquid-phase oxidation of betulin with air over supported Ag NPs catalysts as an alternative method for synthesis of its oxo-derivatives. Based on catalytic studies, high resolution transmission electron microscopy, X-ray photoelectron spectroscopy and ultraviolet-visible diffuse reflectance spectroscopy, the evolution of the surface of nanosilver catalysts during the catalysis was demonstrated, as well as under the impact of reactant gas composition. The kinetic regularities and causes of deactivation of supported Ag NPs catalysts were revealed. An approach to the regeneration of silver catalysts was proposed. Kinetic analysis with numerical data fitting was performed resulting in an adequate description of the concentration dependencies.publishersversionpublishe
Effect of the carbon nanotube surface characteristics on the conductivity and dielectric constant of carbon nanotube/poly(vinylidene fluoride) composites
Commercial multi-walled carbon nanotubes (CNT) were functionalized by oxidation with HNO3, to introduce oxygen-containing surface groups, and by thermal treatments at different temperatures for their selective removal. The obtained samples were characterized by adsorption of N2 at -196°C, temperature-programmed desorption and determination of pH at the point of zero charge. CNT/poly(vinylidene fluoride) composites were prepared using the above CNT samples, with different filler fractions up to 1 wt%. It was found that oxidation reduced composite conductivity for a given concentration, shifted the percolation threshold to higher concentrations, and had no significant effect in the dielectric response
Homogeneous and heterogenised new gold C-scorpionate complexes as catalysts for cyclohexane oxidation
Gold(III) complexes of type [AuCl2{eta(2)-RC(R'pz)(3)}]Cl [R = R' = H (1), R = CH2OH, R' = H (2) and R = H, R' = 3,5-Me-2(3), pz = pyrazol-1-yl] were supported on carbon materials (activated carbon, carbon xerogel and carbon nanotubes) and used for the oxidation of cyclohexane to cyclohexanol and cyclohexanone, with aqueous H2O2, under mild conditions
Methionine-functionalized graphene oxide/sodium alginate bio-polymer nanocomposite hydrogel beads: Synthesis, isotherm and kinetic studies for an adsorptive removal of fluoroquinolone antibiotics
This work was supported by Pt. Ravishankar Research Fellowship Scheme, Raipur, Chhattisgarh, India (grant number V.R. No. 3114/4/Fin./Sch.//2018). This work was also supported by national funds through FCT-Fundacao para a Ciencia e a Tecnologia, I.P., under the Scientific Employment Stimulus-Institutional Call (CEECINST/00102/2018) and by the Associate Laboratory for Green Chemistry-LAQV, financed by national funds from FCT/MCTES (UIDB/50006/2020 and UIDP/50006/2020).In spite of the growing demand for new antibiotics, in the recent years, the occurrence of fluoroquinolone antibiotics (as a curative agent for urinary tract disorders and respiratory problems) in wastewater have drawn immense attention. Traces of antibiotic left-overs are present in the water system, causing noxious impact on human health and ecological environments, being a global concern. Our present work aims at tackling the major challenge of toxicity caused by antibiotics. This study deals with the efficient adsorption of two commonly used fluoroquinolone (FQ) antibiotics, i.e., Ofloxacin (OFX) and Moxifloxacin (MOX) on spherical hydrogel beads generated from methionine‒functionalized graphene oxide/ sodium alginate polymer (abbreviated Met-GO/SA) from aqueous solutions. The composition, morphology and crystal phase of prepared adsorbents were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HR-TEM) and thermogravimetric analysis/differential thermogravimetry (TGA/DTG). Batch adsorption tests are followed to optimize the conditions required for adsorption process. Both functionalized and non-functionalized adsorbents were compared to understand the influence of several experimental parameters, such as, the solution pH, contact time, adsorbent dosage, temperature and initial concentration of OFX and MOX on adsorption. The obtained results indicated that the functionalized adsorbent (Met-GO/SA) showed a better adsorption efficiency when compared to non-functionalized (GO/SA) adsorbent. Further, the Langmuir isotherm was validated as the best fitting model to describe adsorption equilibrium and pseudo second-order-kinetic model fitted well for both types of adsorbate. The maximum adsorption capacities of Met-GO/SA were 4.11 mg/g for MOX and 3.43 mg/g for OFX. Thermodynamic parameters, i.e., ∆G°, ∆H° and ∆S° were also calculated. It was shown that the overall adsorption process was thermodynamically favorable, spontaneous and exothermic in nature. The adsorbents were successfully regenerated up to four cycles with 0.005 M NaCl solutions. Overall, our work showed that the novel Met-GO/SA nanocomposite could better contribute to the removal of MOX and OFX from the liquid media. The gel beads prepared have adequate features, such as simple handling, eco-friendliness and easy recovery. Hence, polymer gel beads are promising candidates as adsorbents for large-scale water remediation.publishersversionpublishe
Влияние модификации поверхности носителя на активность палладиевых катализаторов жидкофазного гидрирования фурфурола
Gold nanoparticles supported on magnesium oxide for CO oxidation
Au was loaded (1 wt%) on a commercial MgO support by three different methods: double impregnation, liquid-phase reductive deposition and ultrasonication. Samples were characterised by adsorption of N2 at -96°C, temperature-programmed reduction, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction. Upon loading with Au, MgO changed into Mg(OH)2 (the hydroxide was most likely formed by reaction with water, in which the gold precursor was dissolved). The size range for gold nanoparticles was 2-12 nm for the DIM method and 3-15 nm for LPRD and US. The average size of gold particles was 5.4 nm for DIM and larger than 6.5 for the other methods. CO oxidation was used as a test reaction to compare the catalytic activity. The best results were obtained with the DIM method, followed by LPRD and US. This can be explained in terms of the nanoparticle size, well known to determine the catalytic activity of gold catalysts
The effect of nanotube surface oxidation in the electrical response of MWCNT/PVDF nanocomposites
Carbon nanotubes / poly(vinylidene fluoride) composites were prepared using CNT with different oxidation and thermal treatments. The oxidation procedure leads to CNT with the most acidic characteristics that lower the degree of crystallinity of the polymer and contribute to a large increase of the dielectric constant. The surface treatments, in general, increase percolation threshold and decrease conductivity, but, on the other hand, are able to promote the nucleation of the electroactive phase of the polymer, which is suitable for the use of PVDF in sensors, actuators and other smart materials applications. Finally, the surface treatments do not seem to affect CNT interaction among them, reaching similar degrees of dispersion in all cases, as shown by the SEM results.
The maximum value of the dielectric constant is ~630. It is demonstrated that the composite conductivity can be attributed to a hopping mechanism that is strongly affected by the surface treatment of the CNT.The authors thank the Fundacao para a Ciencia e a Tecnologia (FCT), Portugal, for financial support through the projects PTDC/CTM/69316/2006 and NANO/NMed-SD/0156/2007), and CIENCIA 2007 program for S.A.C.; V. S., J.S. and J.N.P. also thank FCT for the SFRH/BPD/63148/2009, SFRH/BD/60623/2009 and SFRH/BD/66930/2009 grants
- …