Compressive behavior of Co-Cr-Mo radially graded porous structures under as-built and heat-treated conditions

Additive manufacturing research is continuously growing, and this field requires a full improvement of the capability and reliability of the processes involved. Of particular interest is the study of complex geometries production, such as lattice structures, which may have a potentially huge field of application, especially for biomedical products.In this work, the powder bed fusion technique was utilized to manufacture lattice structures with defined building angles concerning the build platform. A biocompatible Co-Cr-Mo alloy was used. Three different types of elementary cell geometry were selected: Face Centered Cubic, Diagonal, and Diamond. These cells were applied to the radially oriented lattice structures to evaluate the influence of their orientation in relation to the sample and the build platform. Moreover, heat treatment was carried out to study its influence on microstructural properties and mechanical behavior. Microhardness was measured, and compressive tests were performed to detect load response and to analyse the fracture mechanisms of these structures.The results show that the mechanical properties are highly influenced by the cell orientation in relation to the building direction and that the properties can be further tuned via HT. The favorable combination of mechanical properties and biocompatibility suggests that Co-Cr-Mo lattices may represent an optimal solution to produce customized metal implants

Selective Laser Melting of Ti-6Al-4V Lattices:Case Study on a Spinal Cage Prosthesis

Biomedical prostheses are artificial devices suitable for the replacement of missing or inefficient parts of the body, implanted to reduce the anatomical or functional deficiency, and sometimes also applied for aesthetic purposes. Despite this type of medical devices represents today a very innovative sector from the medical and engineering point of view, some issues, inherent to the interaction between human body and the external hosts must be considered. It is important that the weight and porosity of the prosthesis respect the patient’s physiological equilibrium which permit an appropriate osseointegration where needed. A typical solution is a lattice structure, which can be manufactured by Additive Manufacturing techniques which, as known, permit to build complex geometries in comparison with other processing routes. Lattice structure are typically characterized by both stiffness and strength significantly lower than the full part of the structure. Generally, for this reason, the lattices are applied to the low-stress areas, leaving a portion of solid sufficient to transmit the loads involved, or in such a way to guarantee the desired flexibility of the part-itself. During the design of lattices some limitations regarding their printability must be considered, such as the minimum printable dimension and the necessary support parts. A Design of Experiment analysis was conducted to identify the optimal parameters to manufacture a spinal cage with negligible porosity via laser powder bed fusion using Ti6Al4V alloy.</p