New primitives of controlled elements F2/4 for block ciphers

This paper develops the cipher design approach based on the use of data-dependent operations (DDOs). A new class of DDO based on the advanced controlled elements (CEs) is introduced, which is proven well suited to hardware implementations for FPGA devices. To increase the hardware implementation efficiency of block ciphers, while using contemporary FPGA devices there is proposed an approach to synthesis of fast block ciphers, which uses the substitution-permutation network constructed on the basis of the controlled elements F2/4 implementing the 2 x 2 substitutions under control of the four-bit vector. There are proposed criteria for selecting elements F2/4 and results on investigating their main cryptographic properties. It is designed a new fast 128-bit block cipher MM-128 that uses the elements F2/4 as elementary building block. The cipher possesses higher performance and requires less hardware resources for its implementation on the bases of FPGA devices than the known block ciphers. There are presented result on differential analysis of the cipher MM-12

Electrically stable carbon nanotube yarn under tensile strain

We report a highly stable electrical conductance of a compact and well-oriented carbon nanotube yarn under tensile strain. The gauge factor of the yarn was found to be extremely small of approximately 0.15 thanks to the improvements in the dry spinning process, includingmultiweb spinning and heat treatment. The threshold strain εs, below which the yarn retains its electrical conductance stability, has also been determined to be approximately 15 × 103 ppm. Owing to its highly stable resistance under mechanical strain, the yarn has a good potential as a wiring material for niche applications,where lightweight and resistance stability are required

Numerical simulation of all-normal dispersion visible to near-infrared supercontinuum generation in photonic crystal fibers with core filled chloroform

This study proposes a photonic crystal fiber made of fused silica glass, with the core infiltrated with chloroform as a new source of supercontinuum (SC) spectrum. We numerically study the guiding properties of the fiber structure in terms of characteristic dispersion and mode area of the fundamental mode. Based on the results, we optimized the structural geometries of the CHCl3-core photonic crystal fiber to support the broadband SC generations. The fiber structure with a lattice constant of 1 μm, a filling factor of 0.8, and the diameter of the first-ring air holes equaling 0.5 μm operates in all-normal dispersion. The SC with a broadened spectral bandwidth of 0.64 to 1.80 μm is formed by using a pump pulse with a wavelength of 850 nm, 120 fs duration, and power of 0.833 kW. That fiber would be a good candidate for all-fiber SC sources as cost-effective alternative to glass core fibers

Carbon nanotube four-terminal devices for pressure sensing applications

Carbon nanotubes (CNTs) are of high interest for sensing applications, owing to their superior mechanical strength, high Young’s modulus and low density. In this work, we report on a facile approach for the fabrication of carbon nanotube devices using a four terminal configuration. Oriented carbon nanotube films were pulled out from a CNT forest wafer and then twisted into a yarn. Both the CNT film and yarn were arranged on elastomer membranes/diaphragms which were ar-ranged on a laser cut acrylic frame to form pressure sensors. The sensors were calibrated using a precisely controlled pressure system, showing a large change of the output voltage of approximately 50 mV at a constant supply current of 100µA and under a low applied pressure of 15 mbar. The results indicate the high potential of using CNT films and yarns for pressure sensing applications

Numerical study and experimental investigation of an electrohydrodynamic device for inertial sensing

We present a multi-physics simulation associated with experimental investigation for an electrohydrodynamic gyroscope based on ion wind corona discharge. The present device consisting of multiple point-ring electrodes generates a synthetic jet flow of ions for inertial sensing applications. Meanwhile the residual charge of jet is neutralized by an external ring electrode to guarantee the ion wind stable while circulating inside the device's channels. The working principle including the generation and then circulation of jet flow within the present device is firstly demonstrated by a numerical simulation and the feasibility and stability of the device are then successfully investigated by experimental work. Results show owing to the ion wind corona discharge based approach associated with new configuration, the present device is robust and consumes low energy

A Wearable, Bending-Insensitive Respiration Sensor Using Highly Oriented Carbon Nanotube Film

Recently, wearable electronics for health monitoring have been demonstrated with considerable benefits for early-stage disease detection. This article reports a flexible, bending-insensitive, bio-compatible and lightweight respiration sensor. The sensor consists of highly oriented carbon nanotube (HO-CNT) films embedded between electro-spun polyacrylonitrile (PAN) layers. By aligning carbon nanotubes between the PAN layers, the sensor exhibits a high sensitivity towards airflow (340 mV/(m/s)) and excellent flexibility and robustness. In addition, the HO-CNT sensor is insensitive to mechanical bending, making it suitable for wearable applications. We successfully demonstrated the attachment of the sensor to the human philtrum for real-time monitoring of the respiration quality. These results indicate the potential of HO-CNT flow sensor for ubiquitous personal health care applications

Polyacrylonitrile-carbon nanotube-polyacrylonitrile: a versatile robust platform for flexible multifunctional electronic devices in medical applications

Flexible multifunctional electronic devices are of high interest for a wide range of applications including thermal therapy and respiratory devices in medical treatment, safety equipment, and structural health monitoring systems. This paper reports a scalable and efficient strategy of manufacturing a polyacrylonitrile-carbon nanotube-polyacrylonitrile (PAN-CNT-PAN)robust flexible platform for multifunctional electronic devices including flexible heaters, temperature sensors, and flexible thermal flow sensors. The key advantages of this platform include low cost, porosity, mechanical robustness, and electrical stability under mechanical bending, enabling the development of fast-response flexible heaters with a response time of ≈1.5 s and relaxation time of ≈1.7 s. The temperature-sensing functionality is also investigated with a range of temperature coefficient of resistances from −650 to −900 ppm K−1. A flexible hot-film sensing concept is successfully demonstrated using PAN-CNT-PAN with a high sensitivity of 340 mV (m s−1)−1. The sensitivity enhancement of 50% W−1 is also observed with increasing supply power. The low cost, porosity, versatile, and robust properties of the proposed platform will enable the development of multifunctional electronic devices for numerous applications such as flexible thermal management, temperature stabilization in industrial processing, temperature sensing, and flexible/wearable devices for human healthcare applications

Low pump power coherent supercontinuum generation in heavy metal oxide solid-core photonic crystal fiber infiltrated with carbon tetrachloride covering 930 – 2500 nm

All-normal dispersion supercontinuum (ANDi SC) generation in a lead-bismuth- gallate glass solid-core photonic crystal fiber (PCF) with cladding air-holes infiltrated with carbon tetrachloride (CCl4) is experimentally investigated and numerically verified. The liquid infiltration results in additional degrees of freedom that are complimentary to conventional dispersion engineering techniques and that allow the design of soft-glass ANDi fibers with an exceptionally flat near-zero dispersion profile. The unique combination of high nonlinearity and low normal dispersion enables the generation of a coherent, low-noise SC covering 0.93–2.5 μm requiring only 12.5 kW of pump peak power delivered by a standard ultrafast erbium-fiber laser with 100 MHz pulse repetition rate (PRR). This is a much lower peak power level than has been previously required for the generation of ANDi SC with bandwidths exceeding one octave in silica- or soft-glass fibers. Our results show that liquid-composite fibers are a promising pathway for scaling the PRR of ANDi SC sources by making the concept accessible to pump lasers with hundreds of megahertz of gigahertz PRR that have limited peak power per pulse but are often required in applications such as high-speed nonlinear imaging, optical communications, or frequency metrology. Furthermore, due to the overlap of the SC with the major gain bands of many rare-earth fiber amplifiers, our source could serve as a coherent seed for low-noise ultrafast lasers operating in the short-wave infrared spectral region

Fabrication of a sensitive pressure sensor using carbon nanotube micro-yarns

Developing flexible pressure sensors is of high interest in soft skin and tactile sensing applications. Here we demonstrate a simple approach to fabricating a sensitive resistive pressure sensor using carbon nanotube (CNT) micro-yarns as a pressure sensing element which is constructed on a stretchable acrylic elastomer. The sensor showed a high sensitivity of -0.86 Ω/kPa and a fast response time of 100 ms. Different to the longitudinal piezoresistive effect of micro-yarns, the high pressure sensitivity of the sensor was achieved owing to the compressibility of the micro-yarn in the direction perpendicular to the yarn axis. The sensor was also able to monitor finger pressure in real-time, demonstrating its potential for tactile sensing applications