Influence of Nb-doping on the structural and electrical properties of lanthanum molybdates, La5.4MoO11.1

Nowadays, hydrogen is receiving a great deal of attention as an energy carrier. Commonly, it is obtained by hydrocarbons reforming, such as natural gas, coal and biomass. However, the resulting hydrogen needs to be purified to remove by-products and impurities, increasing the production costs. An alternative for hydrogen production is proton-conducting ceramics, where hydrogen separation takes place via a chemical potential gradient across the membrane.1, 2 In this work, Nb-doped La6MoO12--based compounds have been investigated as part of a new family of materials very competitive as SOFC electrolyte and hydrogen separation membranes.3 These materials, La5.4Mo1-xNbxO11.1-x/2 (x = 0.05, 0.10, 0.15 y 0.20) were synthesized by the freeze-drying precursor method and calcination conditions have been optimized to obtain single phases. A complete characterization has been carried out using X-Ray powder diffraction and scanning and transmission electron microscopy. The total conductivity was determined by complex impedance spectroscopy at different atmospheres. Different polymorphs are obtained as a function of the cooling rate and the dopant amount. The samples cooled by quenching are cubic with a fluorite-type structure (Fm3 ̅m) and the ones cooled at 50 y 0.5 ºC•min-1 are rhombohedral (R1 and R2 polymorphs). For niobium contents higher than x = 0.10 the R1 polymorph is stabilised at cooling rates equal or inferior to 50 ºC•min-1. For all three series, the incorporation of niobium into La5.4MoO11.1 increases the conductivity, reaching the best values for x=0.10 and the sample obtained by quenching.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Effect of preparation conditions on the polymorphism and transport properties of lanthanum molybdates

In this work, La6MoO12-based compounds were investigated as part of a new family of materials very competitive as hydrogen separation membranes [1,2]. La5.4MoO11.1 was synthesized by the freeze-drying precursor method and the calcination conditions were optimized in order to obtain single phases. Several cooling rates were applied and different polymorphs were obtained: a simple cubic fluorite symmetry (Fm-3m) for the sample cooled by quenching, and two different rhombohedral (R-3) space groups for the samples cooled at 50 ºC•min-1 and 0.5 ºC•min-1 (see Figure below). For the quenched sample, the Rietveld refinement was satisfactory in a Fm-3m space group. For the other two compositions no structural model was available and were indexed in a R-3 space group, however some small reflections were not given any intensity by the model used. Transmission electron microscopy confirmed the presence of superstructures for those samples. All ceramic materials were obtained with relative densities close to 100% after sintering at 1500 ºC. Stability studies demonstrated that all three polymorphs were stable in oxidizing and reducing conditions at 800 ºC for 48 hours. The three samples present a significant proton contribution to the conductivity at temperatures lower than 800 ºC. These results were confirmed by thermogravimetric analysis. The highest conductivity values were observed for the samples prepared by quenching. The three polymorphs display a small p-type electronic contribution to the overall conductivity in oxidizing conditions and n-type electronic one in very reducing conditions, much more significant for the samples cooled by quenching and at 50 ºC•min-1.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Relationship between the Structure and Transport Properties in the Ce1−xLaxO2−x/2 System

La-doped CeO2 materials have been widely investigated for potential applications in different high-temperature electrochemical devices, such as fuel cells and ceramic membranes for hydrogen production. However, the crystal structure is still controversial, and different models based on fluorite, pyrochlore, and/or type-C structures have been considered, depending on the lanthanum content and synthesis method used. In this work, an exhaustive structural analysis of the Ce1−xLaxO2−x/2 system (0.2 < x ≤ 0.7) is performed with different techniques. The average crystal structure, studied by conventional X-ray diffraction, could be considered to be a disordered fluorite; however, the local structure, examined by electron diffraction and Raman spectroscopy, reveals a biphasic mixture of fluorite and C-type phases. The thermal and electrical properties demonstrate that the materials with x ≥ 0.4 are oxide ion proton conductors in an oxidizing atmosphere and mixed ionic electronic conductors in a reducing atmosphere. The water uptake and proton conductivity increase gradually with the increase in La content, suggesting that the formation of the C-type phase is responsible for the proton conduction in these materials.MINECO (RTI2018-093735-B-I00 y MAT2016-77648-R

Metal-Doping of La5.4MoO11.1 Proton Conductors: Impact on the Structure and Electrical Properties.

La5.4MoO11.1 proton conductors with different metal doping (Ca2+, Sr2+, Ba2+, Ti4+, Zr4+, and Nb5+) have been prepared and structurally and electrically characterized. Different polymorphs are stabilized depending on the doping and cooling rate used during the synthesis process. The most interesting results are obtained for Nb-doping, La5.4Mo1−xNbxO11.1−x/2, where single compounds are obtained in the compositional range 0 ≤ x ≤ 0.2. These materials are fully characterized by structural techniques such as X-ray and neutron powder diffraction and transmission electron microscopy, which independently confirm the changes of polymorphism. Scanning electron microscopy and impedance spectroscopy measurements in dry/wet gases (N2, O2, and 5% H2−Ar) showed an enhancement of the sinterability and electrical properties of the materials after Nb-doping. Conductivity measurements under very reducing conditions revealed that these materials are mixed ionic-electronic conductors, making them potential candidates for hydrogen separation membranes

Synergic Effect of Metal and Fluorine Doping on the Structural and Electrical Properties of La5.4MoO11.1-Based Materials.

Cationic and anionic frameworks of La5.4MoO11.1 proton conductors have been modified by means of metal (Ti4+, Zr4+, and Nb5+) and fluorine (F−) doping. This synergic effect leads to the stabilization of highsymmetry and single-phase polymorphs. The materials have been fully characterized by structural techniques, such as X-ray and neutron powder diffraction and transmission electron microscopy. The fluorine content was determined by ion chromatography. Impedance spectroscopy analysis under different atmospheres (dry and wet N2 and O2 and wet 5% H2−Ar) showed an improvement in the electronic conductivity under reducing conditions, making these materials potential candidates for hydrogen separation membranes

Impact of the lanthanide size on the polymorphism and electrical properties of Ln5.4MoO11.1 (Ln = Nd, Sm and Gd)

Mixed proton-electronic conductors are of great interest for high temperature electrochemical devices, such as hydrogen separation membranes. In this contribution, ceramics with composition Ln5.4MoO11.1 (Ln = Nd, Sm and Gd) were prepared by a freeze-drying precursor method. The resulting powders were sintered at 1500 ◦C and cooled down at different rates to investigate the different polymorphic forms: quenching (rapid cooling), 5 and 0.5 ◦C min 1. The ceramics were characterized by different techniques: X-ray diffraction, scanning and transmission electron microscopies and X-ray photoelectron and impedance spectroscopies. X-ray diffraction studies confirmed that all materials are single phase regardless of the cooling rate used. Those cooled by quenching present a simple cubic fluorite structure. At lower rates, 5 and 0.5 ◦C min 1, the cubic symmetry is stabilized as the size of the lanthanide decreases. However, electron diffraction studies indicated the formation of domains with superstructure ordering. Furthermore, XPS analysis showed the presence of mixed Mo6+ and Mo5+ for all compositions, which explains the electronic conduction in an oxidizing atmosphere. All materials are stable in reducing atmosphere and the ionic and electronic conductivities show opposite trends as the ionic radii of the lanthanide element becomes smaller, where the former decreases and the latter increases

Virtual Histology of Cortical Thickness and Shared Neurobiology in 6 Psychiatric Disorders

Importance: Large-scale neuroimaging studies have revealed group differences in cortical thickness across many psychiatric disorders. The underlying neurobiology behind these differences is not well understood. Objective: To determine neurobiologic correlates of group differences in cortical thickness between cases and controls in 6 disorders: attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder (ASD), bipolar disorder (BD), major depressive disorder (MDD), obsessive-compulsive disorder (OCD), and schizophrenia. Design, Setting, and Participants: Profiles of group differences in cortical thickness between cases and controls were generated using T1-weighted magnetic resonance images. Similarity between interregional profiles of cell-specific gene expression and those in the group differences in cortical thickness were investigated in each disorder. Next, principal component analysis was used to reveal a shared profile of group difference in thickness across the disorders. Analysis for gene coexpression, clustering, and enrichment for genes associated with these disorders were conducted. Data analysis was conducted between June and December 2019. The analysis included 145 cohorts across 6 psychiatric disorders drawn from the ENIGMA consortium. The numbers of cases and controls in each of the 6 disorders were as follows: ADHD: 1814 and 1602; ASD: 1748 and 1770; BD: 1547 and 3405; MDD: 2658 and 3572; OCD: 2266 and 2007; and schizophrenia: 2688 and 3244. Main Outcomes and Measures: Interregional profiles of group difference in cortical thickness between cases and controls. Results: A total of 12 721 cases and 15 600 controls, ranging from ages 2 to 89 years, were included in this study. Interregional profiles of group differences in cortical thickness for each of the 6 psychiatric disorders were associated with profiles of gene expression specific to pyramidal (CA1) cells, astrocytes (except for BD), and microglia (except for OCD); collectively, gene-expression profiles of the 3 cell types explain between 25% and 54% of variance in interregional profiles of group differences in cortical thickness. Principal component analysis revealed a shared profile of difference in cortical thickness across the 6 disorders (48% variance explained); interregional profile of this principal component 1 was associated with that of the pyramidal-cell gene expression (explaining 56% of interregional variation). Coexpression analyses of these genes revealed 2 clusters: (1) a prenatal cluster enriched with genes involved in neurodevelopmental (axon guidance) processes and (2) a postnatal cluster enriched with genes involved in synaptic activity and plasticity-related processes. These clusters were enriched with genes associated with all 6 psychiatric disorders. Conclusions and Relevance: In this study, shared neurobiologic processes were associated with differences in cortical thickness across multiple psychiatric disorders. These processes implicate a common role of prenatal development and postnatal functioning of the cerebral cortex in these disorders