Carbon Dioxide, a Solvent and Synthon for Green Chemistry

Carbon dioxide is a renewable resource of carbon when we consider the reuse of existing CO2 as a carbon source for producing chemicals. The development of new applications is of major interest from the point of view of carbon dioxide sequestration and within the scope of green chemistry. For example, using CO2 instead of CO or COCl2 for chemical synthesis constitutes an attractive alternative avoiding hazardous and toxic reactants. However, it has the lowest chemical reactivity, which is a serious drawback for its transformation. Supercritical CO2 as a reaction medium offers the opportunity to replace conventional organic solvents. Its benign nature, easy handling and availability, non volatile emitting, and the relatively low critical point (Pc = 73.8 bar, Tc = 31 °C) are particularly interesting for catalytic applications in chemical synthesis, over a wide range of temperatures and pressures. The benefits of coupling catalysis and supercritical fluids are both environmental and commercial: less waste and VOCs emission, improved separation and recycling, and enhanced productivity and selectivity. The case study described in this paper concerns the reaction of carbon dioxide with alcohols to afford dialkyl carbonates with special emphasis on dimethyl carbonate. It is of significant interest because the industrial production of this class of compounds, including polycarbonates, carbamates, and polyurethanes, involves phosgene with strong concerns on environmental impact, transport, safety and waste elimination. The future of carbon dioxide in green chemistry, including supercritical applications, is highly linked to the development of basic knowledge, know-how, and tools for the design of catalyst precursors and reactors

Facteurs édaphiques, dépérissement du chêne et infection par Collybia fusipes

International audienceCollybia fusipes is the cause of a root rot of oaks in Europe. Infection by the pathogen is site dependent and inconsistently correlated with crown deterioration. This study aimed at clarifying the relationship between soil factors and C. fusipes impact on tree health. The database of the Département de la Santé des Forêts, the forest health survey service, collected over the French forest during the last 12 years allowed us to perform a large scale study dealing with soil textures in which C. fusipes was reported to induce problems on Quercus robur and/or Q. petraea. Furthermore, a specific survey from 30 plots in north eastern France was carried out to determine which of the soil factors, such as texture, degree of waterlogging, presence and nature of a layer limiting rooting, carbon/nitrogen ratio, cation exchange capacity, or pH could be related to an increased risk of decline of pedunculate oaks infected by C. fusipes. The main results were that C. fusipes is preferentially distributed on coarse textured soils and that its impact on tree crown appearance also increased with the soil sand content

Red and orange laser operation of Pr:KYF4 pumped by a Nd:YAG/LBO laser at 469.1nm and a InGaN laser diode at 444nm

We report the basic luminescence properties and the continuous-wave (CW) laser operation of a Pr3+-doped KYF4 single crystal in the Red and Orange spectral regions by using a new pumping scheme. The pump source is an especially developed, compact, slightly tunable and intra-cavity frequency-doubled diode-pumped Nd:YAG laser delivering a CW output power up to about 1.4 W around 469.1 nm. At this pump wavelength, red and orange laser emissions are obtained at about 642.3 and 605.5 nm, with maximum output powers of 11.3 and 1 mW and associated slope efficiencies of 9.3% and 3.4%, with respect to absorbed pump powers, respectively. For comparison, the Pr:KYF4 crystal is also pumped by a InGaN blue laser diode operating around 444 nm. In this case, the same red and orange lasers are obtained, but with maximum output powers of 7.8 and 2 mW and the associated slope efficiencies of 7 and 5.8%, respectively. Wavelength tuning for the two lasers is demonstrated by slightly tilting the crystal. Orange laser operation and laser wavelength tuning are reported for the first time

Validation and data characteristics of methane and nitrous oxide profiles observed by MIPAS and processed with Version 4.61 algorithm

The ENVISAT validation programme for the atmospheric instruments MIPAS, SCIAMACHY and GOMOS is based on a number of balloon-borne, aircraft, satellite and ground-based correlative measurements. In particular the activities of validation scientists were coordinated by ESA within the ENVISAT Stratospheric Aircraft and Balloon Campaign or ESABC. As part of a series of similar papers on other species [this issue] and in parallel to the contribution of the individual validation teams, the present paper provides a synthesis of comparisons performed between MIPAS CH4 and N2O profiles produced by the current ESA operational software (Instrument Processing Facility version 4.61 or IPF v4.61, full resolution MIPAS data covering the period 9 July 2002 to 26 March 2004) and correlative measurements obtained from balloon and aircraft experiments as well as from satellite sensors or from ground-based instruments. In the middle stratosphere, no significant bias is observed between MIPAS and correlative measurements, and MIPAS is providing a very consistent and global picture of the distribution of CH4 and N2O in this region. In average, the MIPAS CH4 values show a small positive bias in the lower stratosphere of about 5%. A similar situation is observed for N2O with a positive bias of 4%. In the lower stratosphere/upper troposphere (UT/LS) the individual used MIPAS data version 4.61 still exhibits some unphysical oscillations in individual CH4 and N2O profiles caused by the processing algorithm (with almost no regularization). Taking these problems into account, the MIPAS CH4 and N2O profiles are behaving as expected from the internal error estimation of IPF v4.61 and the estimated errors of the correlative measurements

Two-color rubidium fiber frequency standard

We demonstrate an optical frequency standard based on rubidium vapor loaded within a hollow-core photonic crystal fiber. We use the 5S(1/2)→5D(5/2) two-photon transition, excited with two lasers at 780 and 776 nm. The sum-frequency of these lasers is stabilized to this transition using modulation transfer spectroscopy, demonstrating a fractional frequency stability of 9.8×10(-12) at 1 s. The current performance limitations are presented, along with a path to improving the performance by an order of magnitude. This technique will deliver a compact, robust standard with potential applications in commercial and industrial environments.C. Perrella, P. S. Light, J. D. Anstie, F. N. Baynes, F. Benabid, and A. N. Luite

Laser spectroscopic study of ozone in the 100←000 band for the SWIFT instrument

International audienceNot Availabl