Guadalupe pluton–Mariposa Formation age relationships in the southern Sierran Foothills: Onset of Mesozoic subduction in northern California?

We report a new 153 ± 2 Ma SIMS U-Pb date for zircons from the hypabyssal Guadalupe pluton which crosscuts and contact metamorphoses upper crustal Mariposa slates in the southern Sierra. A ~950 m thick section of dark metashales lies below sandstones from which clastic zircons were analyzed at 152 ± 2 Ma. Assuming a compacted depositional rate of ~120 m/Myr, accumulation of Mariposa volcanogenic sediments, which overlie previously stranded Middle Jurassic and older ophiolite + chert-argillite belts in the Sierran Foothills, began no later than ~160 Ma. Correlative Oxfordian-Kimmeridgian strata of the Galice Formation occupy a similar position in the Klamath Mountains. We speculate that the Late Jurassic was a time of transition from (1) a mid-Paleozoic–Middle Jurassic interval of mainly but not exclusively strike-slip and episodic docking of oceanic terranes; (2) to transpressive plate underflow, producing calcalkaline igneous arc rocks ± outboard blueschists at ~170–150 Ma, whose erosion promoted accumulation of the Mariposa-Galice overlap strata; (3) continued transpressive underflow attending ~200 km left-lateral displacement of the Klamath salient relative to the Sierran arc at ~150–140 Ma and development of the apparent polar wander path cusps for North and South America; and (4) then nearly orthogonal mid and Late Cretaceous convergence commencing at ~125–120 Ma, during reversal in tangential motion of the Pacific plate. After ~120 Ma, nearly head-on subduction involving minor dextral transpression gave rise to voluminous continent-building juvenile and recycled magmas of the Sierran arc, providing the erosional debris to the Great Valley fore arc and Franciscan trench

On the Snow Line in Dusty Protoplanetary Disks

The snow line, in Hayashi's (1981) model, is where the temperature of a black body that absorbed direct sunlight and re-radiated as much as it absorbed, would be 170~K. It is usually assumed that the cores of the giant planets, e.g., Jupiter, form beyond the snow line. Since Hayashi, there have been a series of more detailed models of the absorption by dust of the stellar radiation, and of accretional heating, which alter the location of the snow line. We have attempted a "self-consistent" model of a T Tauri disk in the sense that we used dust properties and calculated surface temperatures that matched observed disks. We then calculated the midplane temperature for those disks, with no accretional heating or with small (<10^-8) accretion rates. Our models bring the snow line in to the neighbourhood of 1 AU; not far enough to explain the close planetary companions to other stars, but much closer than in recent starting lines for orbit migration scenarios.Comment: 9 pages, 1 figure, to appear in ApJ,528,200

Warm dust in the terrestrial planet zone of a sun-like Pleiad: collisions between planetary embryos?

Only a few solar-type main sequence stars are known to be orbited by warm dust particles; the most extreme is the G0 field star BD+20 307 that emits ~4% of its energy at mid-infrared wavelengths. We report the identification of a similarly dusty star HD 23514, an F6-type member of the Pleiades cluster. A strong mid-IR silicate emission feature indicates the presence of small warm dust particles, but with the primary flux density peak at the non-standard wavelength of ~9 micron. The existence of so much dust within an AU or so of these stars is not easily accounted for given the very brief lifetime in orbit of small particles. The apparent absence of very hot (>~1000 K) dust at both stars suggests the possible presence of a planet closer to the stars than the dust. The observed frequency of the BD+20 307/HD 23514 phenomenon indicates that the mass equivalent of Earth's Moon must be converted, via collisions of massive bodies, to tiny dust particles that find their way to the terrestrial planet zone during the first few hundred million years of the life of many (most?) sun-like stars. Identification of these two dusty systems among youthful nearby solar-type stars suggests that terrestrial planet formation is common.Comment: ApJ in press, 19 pages including 3 figures and 2 tables, minor changes to the tables and figure

Computer Simulation of Cytoskeleton-Induced Blebbing in Lipid Membranes

Blebs are balloon-shaped membrane protrusions that form during many physiological processes. Using computer simulation of a particle-based model for self-assembled lipid bilayers coupled to an elastic meshwork, we investigated the phase behavior and kinetics of blebbing. We found that blebs form for large values of the ratio between the areas of the bilayer and the cytoskeleton. We also found that blebbing can be induced when the cytoskeleton is subject to a localized ablation or a uniform compression. The results obtained are qualitatively in agreement with the experimental evidence and the model opens up the possibility to study the kinetics of bleb formation in detail.Comment: To appear in Physical Review

Picoliter-volume inkjet printing into planar microdevice reservoirs for low-waste, high-capacity drug loading.

Oral delivery of therapeutics is the preferred route for systemic drug administration due to ease of access and improved patient compliance. However, many therapeutics suffer from low oral bioavailability due to low pH and enzymatic conditions, poor cellular permeability, and low residence time. Microfabrication techniques have been used to create planar, asymmetric microdevices for oral drug delivery to address these limitations. The geometry of these microdevices facilitates prolonged drug exposure with unidirectional release of drug toward gastrointestinal epithelium. While these devices have significantly enhanced drug permeability in vitro and in vivo, loading drug into the micron-scale reservoirs of the devices in a low-waste, high-capacity manner remains challenging. Here, we use picoliter-volume inkjet printing to load topotecan and insulin into planar microdevices efficiently. Following a simple surface functionalization step, drug solution can be spotted into the microdevice reservoir. We show that relatively high capacities of both topotecan and insulin can be loaded into microdevices in a rapid, automated process with little to no drug waste

Twenty Years of Timing SS433

We present observations of the optical ``moving lines'' in spectra of the Galactic relativistic jet source SS433 spread over a twenty year baseline from 1979 to 1999. The red/blue-shifts of the lines reveal the apparent precession of the jet axis in SS433, and we present a new determination of the precession parameters based on these data. We investigate the amplitude and nature of time- and phase-dependent deviations from the kinematic model for the jet precession, including an upper limit on any precessional period derivative of $\dot P < 5 \times 10^{-5}$. We also dicuss the implications of these results for the origins of the relativistic jets in SS433.Comment: 21 pages, including 9 figures. To appear in the Astrophysical Journa

Experimental investigations of an 0.0405 scale space shuttle configuration 3 orbiter to determine subsonic stability characteristics (OA21A/OA21B), volume 2

Aerodynamic investigations were conducted in a low speed wind tunnel from June 18 through June 25, 1973 on a 0.0405 scale -139B model Space Shuttle Vehicle orbiter. The purpose of the test was to investigate the longitudinal and lateral-directional subsonic aerodynamic characteristics of the proposed PRR Space Shuttle Orbiter. Emphasis was placed on component buildup effects, elevon, rudder, body flaps, rudder flare effectiveness, and canard and speed brake development. Angles of attack from -4 to 24 and angles of sideslip of -10 to 10 were tested. Static pressures were recorded on the base. The aerodynamic force balance results are presented in plotted and tabular form

Apparatus for and method of eliminating single event upsets in combinational logic

An apparatus for and method of eliminating single event upsets (or SEU) in combinational logic are used to prevent error propagation as a result of cosmic particle strikes to the combinational logic. The apparatus preferably includes a combinational logic block electrically coupled to a delay element, a latch and an output buffer. In operation, a signal from the combinational logic is electrically coupled to a first input of the latch. In addition, the signal is routed through the delay element to produce a delayed signal. The delayed signal is routed to a second input of the latch. The latch used in the apparatus for preventing SEU preferably includes latch outputs and a feature that the latch outputs will not change state unless both latch inputs are correct. For example, the latch outputs may not change state unless both latch inputs have the same logical state. When a cosmic particle strikes the combinational logic, a transient disturbance with a predetermined length may appear in the signal. However, a function of the delay element is to preferably provide a time delay greater than the length of the transient disturbance. Therefore, the transient disturbance will not reach both latch inputs simultaneously. As a result, the latch outputs will not permanently change state in error due to the transient disturbance. In addition, the output buffer preferably combines the latch outputs in such a way that the correct state is preserved at all times. Thus, combinational logic with protection from SEU is provided

Achieving equity through 'gender autonomy': the challenges for VET policy and practice

This paper is based on research carried out in an EU Fifth Framework project on 'Gender and Qualification'. The research partners from five European countries investigated the impact of gender segregation in European labour markets on vocational education and training, with particular regard to competences and qualifications. The research explored the part played by gender in the vocational education and training experiences of (i) young adults entering specific occupations in child care, electrical engineering and food preparation/service (ii) adults changing occupations