52 research outputs found
Additive manufactured, highly resilient, elastic, and biodegradable poly(ester)urethane scaffolds with chondroinductive properties for cartilage tissue engineering
Articular cartilage was thought to be one of the first tissues to be successfully engineered. Despite the avascular and non-innervated nature of the tissue, the cells within articular cartilage - chondrocytes - account for a complex phenotype that is difficult to be maintained in vitro. The use of bone marrow-derived stromal cells (BMSCs) has emerged as a potential solution to this issue. Differentiation of BMSCs toward stable and non-hypertrophic chondrogenic phenotypes has also proved to be challenging. Moreover, hyaline cartilage presents a set of mechanical properties - relatively high Young's modulus, elasticity, and resilience - that are difficult to reproduce. Here, we report on the use of additive manufactured biodegradable poly(ester)urethane (PEU) scaffolds of two different structures (500 mu m pore size and 90 degrees or 60 degrees deposition angle) that can support the loads applied onto the knee while being highly resilient, with a permanent deformation lower than 1% after 10 compression-relaxation cycles. Moreover, these scaffolds appear to promote BMSC differentiation, as shown by the deposition of glycosaminoglycans and collagens (in particular collagen II). At gene level, BMSCs showed an upregulation of chondrogenic markers, such as collagen II and the Sox trio, to higher or similar levels than that of traditional pellet cultures, with a collagen II/collagen I relative expression of 2-3, depending on the structure of the scaffold. Moreover, scaffolds with different pore architectures influenced the differentiation process and the final BMSC phenotype. These data suggest that additive manufactured PEU scaffolds could be good candidates for cartilage tissue regeneration in combination with microfracture interventions.</p
Developing double-crosslinking 3D printed hydrogels for bone tissue engineering
Bone defects are one of the main causes of disability worldwide. Due to the disadvantages associated with autografts, the latest advances have been focused on tissue regeneration approaches that use injectable hydrogels or 3D printed hydrogel-based structures that could refill appropriately the bone gap area without the need for external fixatives, leading to bone formation in the long term. Injectable hydrogels could be applied in extrusion-based 3D printing as inks; in this sense, double-crosslinking hydrogels appear as ideal candidates. In this work, injectable and printable double crosslinkable hydrogels based on oxidized xanthan gum (XGox) and methacrylate polyaspartylhydrazide (PAHy-MA) were produced. The formation of dynamic hydrazone bonds, occurring between aldehyde groups on the polysaccharide backbone and hydrazine moieties of PAHy-MA, induced an instant gelation, conferring, also, injectability and self-healing properties to the hydrogels. The presence of methacrylic moieties on the synthetic polymer allowed further crosslinking upon UV irradiation that stabilized the hydrogel shape and mitigated its susceptibility to hydrolytic degradation. Obtained hydrogels showed pseudoplastic behaviour and good recovery of viscoelastic properties over time. The physicochemical and rheological characterization highlighted increased stability and higher viscoelastic moduli after photo-crosslinking. The hydrogels also showed good printability, cytocompatibility and the early formation of a bone-like matrix when osteosarcoma-derived cells (MG-63) were cultured in the scaffolds for 21 days, with an increased collagen I deposition, mineralization and the expression of characteristic osteogenic markers
Plant height and hydraulic vulnerability to drought and cold
Understanding how plants survive drought and cold is increasingly important as plants worldwide experience dieback with drought in moist places and grow taller with warming in cold ones. Crucial in plant climate adaptation are the diameters of water-transporting conduits. Sampling 537 species across climate zones dominated by angiosperms, we find that plant size is unambiguously the main driver of conduit diameter variation. And because taller plants have wider conduits, and wider conduits within species are more vulnerable to conduction-blocking embolisms, taller conspecifics should be more vulnerable than shorter ones, a prediction we confirm with a plantation experiment. As a result, maximum plant size should be short under drought and cold, which cause embolism, or increase if these pressures relax. That conduit diameter and embolism vulnerability are inseparably related to plant size helps explain why factors that interact with conduit diameter, such as drought or warming, are altering plant heights worldwide
Microfabrication of a biomimetic arcade-like electrospun scaffold for cartilage tissue engineering applications
Designing and fabricating hierarchical geometries for tissue engineering (TE) applications is the major challenge and also the biggest opportunity of regenerative medicine in recent years, being the in vitro recreation of the arcade-like cartilaginous tissue one of the most critical examples due to the current inefficient standard medical procedures and the lack of fabrication techniques capable of building scaffolds with the required architecture in a cost and time effective way. Taking this into account, we suggest a feasible and accurate methodology that uses a sequential adaptation of an electrospinning-electrospraying set up to construct a system comprising both fibres and sacrificial microparticles. Polycaprolactone (PCL) and polyethylene glycol were respectively used as bulk and sacrificial biomaterials, leading to a bi-layered PCL scaffold which presented not only a depth-dependent fibre orientation similar to natural cartilage, but also mechanical features and porosity compatible with cartilage TE approaches. In fact, cell viability studies confirmed the biocompatibility of the scaffold and its ability to guarantee suitable cell adhesion, proliferation and migration throughout the 3D anisotropic fibrous network. Additionally, likewise the natural anisotropic cartilage, the PCL scaffold was capable of inducing oriented cell-material interactions since the morphology, alignment and density of the chondrocytes changed relatively to the specific topographic cues of each electrospun layer.publishe
RAF Kinase Activity Regulates Neuroepithelial Cell Proliferation and Neuronal Progenitor Cell Differentiation during Early Inner Ear Development
Background: Early inner ear development requires the strict regulation of cell proliferation, survival, migration and differentiation, coordinated by the concerted action of extrinsic and intrinsic factors. Deregulation of these processes is associated with embryonic malformations and deafness. We have shown that insulin-like growth factor I (IGF-I) plays a key role in embryonic and postnatal otic development by triggering the activation of intracellular lipid and protein kinases. RAF kinases are serine/threonine kinases that regulate the highly conserved RAS-RAF-MEK-ERK signaling cascade involved in transducing the signals from extracellular growth factors to the nucleus. However, the regulation of RAF kinase activity by growth factors during development is complex and still not fully understood.
Methodology/Principal Findings: By using a combination of qRT-PCR, Western blotting, immunohistochemistry and in situ hybridization, we show that C-RAF and B-RAF are expressed during the early development of the chicken inner ear in specific spatiotemporal patterns. Moreover, later in development B-RAF expression is associated to hair cells in the sensory patches. Experiments in ex vivo cultures of otic vesicle explants demonstrate that the influence of IGF-I on proliferation but not survival depends on RAF kinase activating the MEK-ERK phosphorylation cascade. With the specific RAF inhibitor Sorafenib, we show that blocking RAF activity in organotypic cultures increases apoptosis and diminishes the rate of cell proliferation in the otic epithelia, as well as severely impairing neurogenesis of the acoustic-vestibular ganglion (AVG) and neuron maturation.
Conclusions/Significance: We conclude that RAF kinase activity is essential to establish the balance between cell proliferation and death in neuroepithelial otic precursors, and for otic neuron differentiation and axonal growth at the AVG
Current characterization methods for cellulose nanomaterials
International audienc
Additive manufacturing of nanocellulose based scaffolds for tissue engineering: Beyond a reinforcement filler
Cellulose nanomaterials (CNMs) have attracted great attention in the last decades due to the abundance of the biopolymer, the biorenewable character and the outstanding mechanical properties they account for. These, together with their biocompatibility makes them ideal candidates for tissue engineering (TE) applications. Additive manufacturing is an ideal biofabrication approach for TE, providing rapid and reliable technologies to produce scaffolds aimed for the guidance of host or implanted cells to form functional tissues. However, the control of parameters at the nanoscale that regulate cellular functions such as proliferation and differentiation remain challenging. This review article presents the latest advances in the use of CNMs as platforms to guide cellular functions in additive manufactured scaffolds. Special attention is given to functionalization routes, methods to exploit them as topographical cues and to improve the local mechanical properties together with the resulting cell-CNM interactions
Mimicking the Graded Wavy Structure of the Anterior Cruciate Ligament
Anterior cruciate ligament (ACL) is the connective tissue providing mechanical stability to the knee joint. ACL reconstruction upon rupture remains a clinical challenge due to the high mechanical properties required for proper functioning. ACL owes its outstanding mechanical properties to the arrangement of the extracellular matrix (ECM) and to the cells with distinct phenotypes present along the length of the tissue. Tissue regeneration appears as an ideal alternative. In this study, a tri-phasic fibrous scaffold that mimics the structure of collagen in the native ECM is developed, presenting a wavy intermediate zone and two aligned uncurled extremes. The mechanical properties of the wavy scaffolds present a toe region, characteristic of the native ACL, and an extended yield and ultimate strain compared to aligned scaffolds. The presentation of a wavy fiber arrangement affects cell organization and the deposition of a specific ECM characteristic of fibrocartilage. Cells cultured in wavy scaffolds grow in aggregates, deposit an abundant ECM rich in fibronectin and collagen II, and express higher amounts of collagen II, X, and tenomodulin as compared to aligned scaffolds. In vivo implantation in rabbits shows a high cellular infiltration and the formation of an oriented ECM compared to aligned scaffolds
- …