6 research outputs found

    Nucleation mechanism and kinetics from the analysis of polythermal crystallisation data: Methyl stearate from kerosene solutions

    Get PDF
    A polythermal methodology to assess the mechanisms and the kinetics of solution crystallisation is described and used in connection with a recently proposed model for the dependence of the critical undercooling for crystallisation on the cooling rate (D. Kashchiev, A. Borissova, R. B. Hammond, K. J. Roberts, J. Cryst. Growth, 312 (2010) 698-704; J. Phys. Chem. B, 114 (2010) 5441-5446). This first principles model allows determination of crystallisation parameters that could otherwise only be obtained by combined application of both the isothermal and the polythermal methods. The methodology is validated through analysis of experimental data measured for methyl stearate crystallising from kerosene solutions with concentrations from 200 to 350 g l-1. The analysis reveals a progressive heterogeneous nucleation mechanism and crystallite interfacial tension values between 1.64 and 1.79 with no obvious dependence on the solution concentration, in good agreement with values derived by isothermal methods. Sensitivity analysis leads to the conclusion that a minimum of four different cooling rates spanning at least one order of magnitude together with at least five repeats for crystallisation temperature values at each cooling rate are appropriate. Extensive supplementary material provides a mathematical description of the above authors' model, insight into the relationship between this model and the empirical Nyvlt model, and further detail concerning the results of the sensitivity analysis carried out on the experimental methodology used

    Solubility and crystallisability of the ternary system: Hexadecane and octadecane representative in fuel solvents

    Get PDF
    The solubility and crystallisability of a range of binary mixtures of n-hexadecane (C16H34) and n-octadecane (C18H38), as the predominant alkanes present in hydrotreated vegetable oil (HVO), from three representative fuel solutions (dodecane, toluene and kerosene) is presented. The dissolution (saturation) and crystallisation (supersaturation) points of the solutions are measured using poly-thermal methods utilising turbidometric detection over four concentrations from (192 g/l to 400 g/l). The data reveals the existence of more soluble, less stable crystal structures that form from the alkane mixtures, when compared to the stable triclinic crystal structures formed from the single solute component solutions. An increased carbon chain length results in lower solubility for all three solvents and the solvent type is not found to have any significant effect on the solid forms produced from the mixtures. van’t Hoff analysis reveals the solvent type to influence the solute solubility with the closest to ideal behaviour being dodecane followed by kerosene and toluene, respectively. This finding is further supported by the calculated dissolution enthalpies and activity coefficients, which are the lowest in dodecane followed by kerosene and toluene. Larger values of activity coefficients are observed for compositions with molar fraction (y) = 0.1, 0.5–0.7 C18H38 which reflect the complex multi-phase formation in the solutions when compared with the more simple binary melt crystallisation system

    Data for crystallisation, dissolution and saturation temperatures of the ternary system: Hexadecane and octadecane representative in fuel solvents

    Get PDF
    The data presented in this article relates to the crystallisation of hexadecane (C₁₆H₃₄) and octadecane (C₁₈H₃₈), being the predominant alkanes present in hydrotreated vegetable oil (HVO), from solvents representative of fuel (dodecane, toluene and kerosene). Data was collected for eleven C₁₆H₃₄/C₁₈H₃₈ compositions for each solvent used. Raw crystallisation and dissolution data is provided over a range of solution concentrations and cooling rates used under a poly-thermal crystallisation methodology. Equilibrium saturation temperature data is also presented for each composition, concentration and solvent system, indicating the trend in solubility for each solution

    Influence of solution chemistry on the solubility, crystallisability and nucleation behaviour of eicosane in toluene : acetone mixed-solvents

    Get PDF
    The interplay between the solution chemistry and crystallisability of eicosane in mixed toluene : acetone solutions is examined over the full compositional range from pure toluene to pure acetone, using a combination of polythermal crystallisation experiments and molecular modelling. Enthalpies of dissolution and mixing, as well as metastable zone widths increase with increasing acetone content, up to a mol fraction of 0.85 acetone, followed by a decrease in values to pure acetone solutions. Nucleation is found to occur via an instantaneous pathway for the pure solvent systems and also when toluene is in excess, in contrast to solutions where acetone is in excess, which are found to nucleate progressively. Rationalisation through molecular modelling highlights likely changes in the solution structure, whereby eicosane can be expected to be preferentially solvated by toluene, with this solvated cluster being surrounded by a ‘cage’ of acetone molecules. This proposed structure is consistent with a model whereby solute diffusion and hence clustering is hindered when acetone is in excess, decreasing the crystallisability of the solution and effecting a change in the mechanism of nucleation. However, above a critical acetone composition, the potential for complete toluene solvation is restricted and easier crystallisation is enabled
    corecore