Reliable Lifespan Evaluation of a Remote Environment Monitoring System Based on Wireless Sensor Networks and Global System for Mobile Communications

The use of wireless sensor networks (WSN) for monitoring physical and chemical variables in large areas allows density and frequency measurements which have been unavailable to date in classical measurement systems. To fully take advantage of this technology in a particular application, besides an accurate design and selection of all the components involved in its operation, it is essential to dispose of reliable lifetime estimation prior to deployment. This paper presents an experimental approach to determine the actual lifetime of such battery-operated systems, making use of a custom WSN architecture, and for different batteries technologies. To render a reliable evaluation, the energy consumption of the sensor nodes under their different operation modes, in correlation with the battery characteristics and the voltage regulation system, is jointly considered. The result is a complete and practical lifetime model, whose appropriate performance has been validated in a real deployment scenario

A wireless instrumentation control system based on low-cost single board computer gateways

Nowadays, most of the automatized measurement processes are carried out by VISA (Virtual Instrument Software Architecture) compatible instruments, that execute the instructions provided by a host computer connected through wired standard buses, as USB (Universal Serial Bus), GPIB (General-Purpose Instrumentation Bus), PXI (PCI eXtensions for Instrumentation) or Ethernet. To overcome the intrinsic limitations associated to these wired systems, this work presents an instrumentation control system based on the IEEE 802.11 wireless communications standard. Intended for instruments having a USB control port, this port is connected to a gateway based on a compact Raspberry Single Board Computer (SBC) and thus the instrument can be connected to the host computer via Wireless Fidelity (WiFi), easily allowing the deployment of an ad-hoc instruments communication network in the working area or its connection to a previously deployed general purpose WiFi network. Developed under Python, the operation commands, wireless link protocol, and USB connection allow two modes of operation to provide system flexibility: a live mode, where commands are sent individually from the host computer to the selected instrument; and a standalone mode, where a full measurement process can be entirely downloaded in the gateway to be autonomously executed on the instrumentation. The system performance in both operation modes, distance of operation, time latencies, and operating lifetime in battery operation have been characterized

A wearable wireless sensor network for indoor smart environment monitoring in safety applications

This paper presents the implementation of a wearable wireless sensor network aimed at monitoring harmful gases in industrial environments. The proposed solution is based on a customized wearable sensor node using a low-power low-rate wireless personal area network (LR-WPAN) communications protocol, which as a first approach measures CO2 concentration, and employs different low power strategies for appropriate energy handling which is essential to achieving long battery life. These wearables nodes are connected to a deployed static network and a web-based application allows data storage, remote control and monitoring of the complete network. Therefore, a complete and versatile remote web application with a locally implemented decision-making system is accomplished, which allows early detection of hazardous situations for exposed workers

Earnings distribution, corporate governance and CEO pay

We investigate the relationship between earnings differentials and the pay of CEOs of 190 British companies between 1970 and 1990. We find that (i) changes in the differential between the 90th and 50th weekly earnings percentiles for non-manual adult male workers [90:50] explain changes in the level of real CEO salary and bonus in our sample of companies; (ii) changes in this differential also account for changes in the elasticity of CEO pay to firm size; (iii) a broader measure of earnings inequality does far worse than 90:50 at explaining changes in both the level and the firm size elasticity of CEO pay; (iv) fitting the model on data for 1970-1983 and predicting pay levels for the period starting with the widespread adoption of executive share option schemes in 1984, we find a structural break in the relationship between lower management pay differentials and the pay of the CEO. We conclude first that top executive pay prior to 1984 was a stable function of both firm size and earnings differentials lower on the administrative ladder, consistent with a hypothesis advanced by Herbert Simon in 1957; and second that the use of share options from 1984 onward represents not simply a change in the mode of top executive compensation, but a de -linking of the pay of top executives and that of their subordinates

Episodic Recollection Difficulties in ASD Result from Atypical Relational Encoding: Behavioral and Neural Evidence

Memory functioning in Autism Spectrum Disorder (ASD) is characterized by impairments in the encoding of relational but not item information and difficulties in the recollection of contextually rich episodic memories but not in the retrieval of relatively context-free memories through processes of familiarity. The neural underpinnings of this profile and the extent to which encoding difficulties contribute to retrieval difficulties in ASD remain unclear. Using a paradigm developed by Addis and McAndrews [2006; Neuroimage, 33, 1194-1206] we asked adults with and without a diagnosis of ASD to study word-triplets during functional Magnetic Resonance Imaging (fMRI) scanning that varied in the number of category relations amongst component words. Performance at test confirmed attenuated recollection in the context of preserved familiarity based retrieval in ASD. The results also showed that recollection but not familiarity based retrieval increases as a function of category relations in word triads for both groups, indicating a close link between the encoding of relational information and recollection. This link was further supported by the imaging results, where blood oxygen level dependent (BOLD) signal responses in overlapping regions of the inferior prefrontal cortex were sensitive to the relational encoding manipulation as well as the contrast between recollection versus familiarity based retrieval. Interestingly, however, there was no evidence of prefrontal signal differentiation for this latter contrast in the ASD group for whom signal changes in a left hippocampal region were also marginally attenuated. Together, these observations suggest that attenuated levels of episodic recollection in ASD are, at least in part, attributable to anomalies in relational encoding processes

Exchange Monte Carlo for Molecular Simulations with Monoelectronic Hamiltonians

We introduce a general Monte Carlo scheme for achieving atomistic simulations with monoelectronic Hamiltonians including the thermalization of both nuclear and electronic degrees of freedom. The kinetic Monte Carlo algorithm is used to obtain the exact occupation numbers of the electronic levels at canonical equilibrium, and comparison is made with Fermi-Dirac statistics in infinite and finite systems. The effects of a nonzero electronic temperature on the thermodynamic properties of liquid silver and sodium clusters are presented

Influence of material and haptic design on the mechanical stability of intraocular lenses by means of finite-element modeling

Intraocular lenses (IOLs) are used in the cataract treatment for surgical replacement of the opacified crystalline lens. Before being implanted they have to pass the strict quality control to guarantee a good biomechanical stability inside the capsular bag, avoiding the rotation, and to provide a good optical quality. The goal of this study was to investigate the influence of the material and haptic design on the behavior of the IOLs under dynamic compression condition. For this purpose, the strain-stress characteristics of the hydrophobic and hydrophilic materials were estimated experimentally. Next, these data were used as the input for a finite-element model (FEM) to analyze the stability of different IOL haptic designs, according to the procedure described by the ISO standards. Finally, the simulations of the effect of IOL tilt and decentration on the optical performance were performed in an eye model using a ray-tracing software. The results suggest the major importance of the haptic design rather than the material on the postoperative behavior of an IOL. FEM appears to be a powerful tool for numerical studies of the biomechanical properties of IOLs and it allows one to help in the design phase to the manufacturers

Intelligent FDSS Overlay on GSM System (Uplink Analysis)

The overlay of an intelligent frequency diversity spread spectrum system (FDSS) on the (GSM) system is studied. The uplink capacity of both systems is given using a model of 36 hexagonal macrocells. Performance of GSM and FDSS users is investigated. An original GSM system with 48 users/macrocell can be substituted by a mixed system, which has GSM system capacity of 48 users/macrocell and FDSS system capacity of 128 users/macrocell

Occupational choice, number of entrepreneurs and output: theory and empirical evidence with Spanish data

This paper extends the (Lucas, Bell J Econ 9:508–523,1978) model of occupational choices by individuals with different skills, beyond the simple options of self-employment or wage-employment, by including a second choice for the self-employed. That is, an option to hire employees and so become self-employed with employees (SEWEs), or to be self-employed without employees (SEWNEs). We solve for the market equilibrium and examine the sensitivity of relative sizes of occupational groups, and of the level of productivity, to changes in the exogenous parameters. The results show that the positive (negative) association between number of SEWEs (SEWNEs) and productivity, observed in the Spanish data, can be explained, under certain conditions, as the result of cross-region and time differences in average skills. These findings point to the importance of distinguishing between SEWEs and SEWNEs in drawing valid conclusions concerning any link between entrepreneurship and economic development