Soil Chemical Attributes Of A Dystroferric Red Latosol (oxisol) Treated With An Alkaline Effluent From A Pharmaceutical Industry

Effluents from different industrial supply conglomerates are often discarded in the environment without proper treatment. The concern for an economically viable industrial production line, which is both environmentally sound and socially acceptable, is increasing. Some of these effluents are alkaline in nature and may be used as an alternative to chemical conditioners for acidic soils in agricultural systems. This research aimed to evaluate changes in the chemical attributes of a Dystroferric Red Latosol (Oxisol) after application of an effluent from a pharmaceutical industry. The experiment was conducted in a greenhouse using PVC tubes of 1-m length and a 0.2-m diameter filled with soil and different doses of the effluent. After 3 days, 100 mm of water was applied to each treatment. The PVC tubes were incubated for 30 days; thereafter, the tubes disassembled, and soil chemical analysis were made at different soil depths: 0-0.2, 0.2-0.4, 0.4-0.6, 0.6-0.8, and 0.8-1.0 m. The effluent applications significantly altered the soil elements in the 0-0.2 m layer, increasing the concentrations of K+, P, Mn2+, Na+, Cu2+, H+, Ca2+, Al3+ and the soil pH. In the subsurface layers, the concentration of the elements Zn2+, Cu2+, K+, and Na+ also changed significantly. In general, the application of pharmaceutical industry residue improved soil chemical attributes.3753037304

Evaluation of the AR4 CMIP3 and the AR5 CMIP5 model and projections for precipitation in northeast Brazil

This article compares the sensitivity of IPCC CMIP3-AR4 and CMIP5-AR5 models used on the latest reports from the Intergovernmental Panel on Climate Change (IPCC) in representing the annual average variations (austral summer and autumn) on three regions in Northeastern Brazil (NNEB) for the periods 1979–2000 using the CMAP (Climatology Merged Analysis of Precipitation) data as reference. The three areas of NNEB chosen for this analysis were the semiarid, eastern, and southern regions. The EOF analysis was performed to investigate how the coupled models resolve the temporal variability of the spatial modes in the Tropical Atlantic Sea Surface Temperature (SST), which drives the interannual variations of the rainfall in the Northeastern Brazil. CMIP3-AR4 and CMIP5-AR5 models presented a good representation of the annual cycle of precipitation. Results from correlation and mean absolute error analysis indicate that both CMIP3 and CMIP5 models produce large errors and barely capture the interannual rainfall variance during austral summer and autumn in Northeast Brazil, this features is closely related to the poor representation of the modes of SST variability in the Tropical Atlantic Ocean. For the summer and autumn rainfall projections (2040–2070) in the semiarid region, there was no convergence between the CMIP3 and CMIP5 models. During the summer and autumn in the eastern sector, both the CMIP3 and CMIP5 models projected rainfall above the mean for the 2040–2070 period

Fabrication Of A Spun Elliptically Birefringent Photonic Crystal Fiber And Its Characterization As An Electrical Current Sensor

In this paper a spun elliptically birefringent photonic crystal fiber is fabricated and characterized. Its performance as a current sensor, using a polarimetric configuration, was tested and compared against single mode fiber at 633 nm. In particular the sensor sensitivity and linearity was investigated using fiber loops with different radius or number of turns around the conductor. The results obtained show that the spun fiber (40 rotation per meter) is able to suppress quite effectively the effects of the bend induced birefringence as compared to the standard fiber. © 2013 SPIE.8794 Innovative Economy National Cohesion Strategy,InPhoTech Ltd.,AMS Technologies,PHOENIXSilva, R., Optical current sensors for high power systems: A review (2012) Appl. Sci., 2, pp. 602-628GForman, P., Jahoda, F., Linear birefringence effects on fiber-optic current sensors (1988) Applied Optics, 27 (15), pp. 3088-3096Rose, A.H., Ren, Z., Day, G., Twisting and annealing optical fiber for current sensors (1996) Journal of Lightwave Technology, 14 (11), pp. 2492-2498Laming, R.I., Payne, S., Electric-current sensors employing spun highly birefringent optical fibers (1989) Journal of Lightwave Technology, 7 (12), pp. 2084-2094Michie, A., Spun elliptically birefringent photonic crystal fibre for current sensing (2007) Meas. Sci. Technol, 18, pp. 3070-307

Design, development and verification of the 30 and 44 GHz front-end modules for the Planck Low Frequency Instrument

We give a description of the design, construction and testing of the 30 and 44 GHz Front End Modules (FEMs) for the Low Frequency Instrument (LFI) of the Planck mission to be launched in 2009. The scientific requirements of the mission determine the performance parameters to be met by the FEMs, including their linear polarization characteristics. The FEM design is that of a differential pseudo-correlation radiometer in which the signal from the sky is compared with a 4-K blackbody load. The Low Noise Amplifier (LNA) at the heart of the FEM is based on indium phosphide High Electron Mobility Transistors (HEMTs). The radiometer incorporates a novel phase-switch design which gives excellent amplitude and phase match across the band. The noise temperature requirements are met within the measurement errors at the two frequencies. For the most sensitive LNAs, the noise temperature at the band centre is 3 and 5 times the quantum limit at 30 and 44 GHz respectively. For some of the FEMs, the noise temperature is still falling as the ambient temperature is reduced to 20 K. Stability tests of the FEMs, including a measurement of the 1/f knee frequency, also meet mission requirements. The 30 and 44 GHz FEMs have met or bettered the mission requirements in all critical aspects. The most sensitive LNAs have reached new limits of noise temperature for HEMTs at their band centres. The FEMs have well-defined linear polarization characteristcs.Comment: 39 pages, 33 figures (33 EPS files), 12 tables. Planck LFI technical papers published by JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/1748-022