65,736 research outputs found
Fixture for environmental exposure of structural materials under compression load
A device for stressing a deformable material specimen consists of top plate and a bottom plate sandwiching a guide cylinder. The specimen is positioned on the bottom plate and attached to a load piston. Force is applied through the top plate into the guide cylinder. Once the specimen is loaded, the stress is maintained by tightening tie bolt nuts
Study for prediction of rotor/wake/fuselage interference. Part 2: Program users guide
A method was developed which permits the fully coupled calculation of fuselage and rotor airloads for typical helicopter configurations in forward flight. To do this, an iterative solution is carried out based on a conventional panel representation of the fuselage and a blade element representation of the rotor where fuselage and rotor singularity strengths are determined simultaneously at each step and the rotor wake is allowed to relax (deform) in response to changes in rotor wake loading and fuselage presence. On completion of the iteration, rotor loading and inflow, fuselage singularity strength (and, hence, pressure and velocity distributions) and rotor wake are all consistent. The results of a fully coupled calculation of the flow around representative helicopter configurations are presented. The effect of fuselage components on the rotor flow field and the overall wake structure is discussed as well as the aerodynamic interference between the different parts of the aircraft. Details of the computer program are given
Study for prediction of rotor/wake/fuselage interference, part 1
A method was developed which allows the fully coupled calculation of fuselage and rotor airloads for typical helicopter configurations in forward flight. To do this, an iterative solution is carried out based on a conventional panel representation of the fuselage and a blade element representation of the rotor where fuselage and rotor singularity strengths are determined simultaneously at each step and the rotor wake is allowed to relax (deform) in response to changes in rotor wake loading and fuselage presence. On completion of the iteration, rotor loading and inflow, fuselage singularity strength (and, hence, pressure and velocity distributions) and rotor wake are all consistent. The results of a fully coupled calculation of the flow around representative helicopter configurations are presented. The effect of fuselage components on the rotor flow field and the overall wake structure is detailed and the aerodynamic interference between the different parts of the aircraft is discussed
Development and evaluation of scatterometer data processing algorithms
There are no author-identified significant results in this report
Study of sampling systems for comets and Mars
Several aspects of the techniques that can be applied to acquisition and preservation of samples from Mars and a cometary nucleus were examined. Scientific approaches to sampling, grounded in proven engineering methods are the key to achieving the maximum science value from the sample return mission. If development of these approaches for collecting and preserving does not preceed mission definition, it is likely that only suboptimal techniques will be available because of the constraints of formal schedule timelines and the normal pressure to select only the most conservative and least sophisticated approaches when development has lagged the mission milestones. With a reasonable investment now, before the final mission definition, the sampling approach can become highly developed, ready for implementation, and mature enough to help set the requirements for the mission hardware and its performance
COMPARISON OF INJECTORS WITH A 200-POUND-THRUST AMMONIA-OXYGEN ENGINE
Injection techniques for 200-pound thrust ammonia- oxygen rocket engin
Effects of method of loading and specimen configuration on compressive strength of graphite/epoxy composite materials
Three test schemes were examined for testing graphite/epoxy (Narmco T300/5208) composite material specimens to failure in compression, including an adaptation of the IITRI "wedge grip" compression fixture, a face-supported-compression fixture, and an end-loaded-coupon fixture. The effects of specimen size, specimen support arrangement and method of load transfer on compressive behavior of graphite/epoxy were investigated. Compressive stress strain, strength, and modulus data obtained with the three fixtures are presented with evaluations showing the effects of all test parameters, including fiber orientation. The IITRI fixture has the potential to provide good stress/strain data to failure for unidirectional and quasi-isotropic laminates. The face supported fixture was found to be the most desirable for testing + or - 45 s laminates
Fast initialization of a high-fidelity quantum register using optical superlattices
We propose a method for the fast generation of a quantum register of
addressable qubits consisting of ultracold atoms stored in an optical lattice.
Starting with a half filled lattice we remove every second lattice barrier by
adiabatically switching on a superlattice potential which leads to a long
wavelength lattice in the Mott insulator state with unit filling. The larger
periodicity of the resulting lattice could make individual addressing of the
atoms via an external laser feasible. We develop a Bose-Hubbard-like model for
describing the dynamics of cold atoms in a lattice when doubling the lattice
periodicity via the addition of a superlattice potential. The dynamics of the
transition from a half filled to a commensurately filled lattice is analyzed
numerically with the help of the Time Evolving Block Decimation algorithm and
analytically using the Kibble-Zurek theory. We show that the time scale for the
whole process, i.e. creating the half filled lattice and subsequent doubling of
the lattice periodicity, is significantly faster than adiabatic direct quantum
freezing of a superfluid into a Mott insulator for large lattice periods. Our
method therefore provides a high fidelity quantum register of addressable
qubits on a fast time scale.Comment: 22 pages, 9 figures, IOP style. Revised version to appear in NJ
Helmet weight simulator
A device for providing acceleration cues to the helmet of a simulator pilot is described. Pulleys are attached to both shoulders of the pilot. A cable is attached to both sides of the helmet and extends through the pulleys to a takeup reel that is controlled by a torque motor. Control signals are applied to a servo system including the torque motor, the takeup reel and a force transducer which supplies the feedback signal. In one embodiment of the invention the force transducer is in the cable and in another it is in the takeup reel
Interim prediction method for low frequency core engine noise
A literature survey on low-frequency core engine noise is presented. Possible sources of low frequency internally generated noise in core engines are discussed with emphasis on combustion and component scrubbing noise. An interim method is recommended for predicting low frequency core engine noise that is dominant when jet velocities are low. Suggestions are made for future research on low frequency core engine noise that will aid in improving the prediction method and help define possible additional internal noise sources
- …