Poly-L-Lactic Acid (PLLA)-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications

Synthetic biopolymers are effective cues to replace damaged tissue in the tissue engineering(TE) field, both for in vitro and in vivo application. Among them, poly-L-lactic acid (PLLA) has beenhighlighted as a biomaterial with tunable mechanical properties and biodegradability that allowsfor the fabrication of porous scaffolds with different micro/nanostructures via various approaches.In this review, we discuss the structure of PLLA, its main properties, and the most recent advancesin overcoming its hydrophobic, synthetic nature, which limits biological signaling and proteinabsorption. With this aim, PLLA-based scaffolds can be exposed to surface modification or combinedwith other biomaterials, such as natural or synthetic polymers and bioceramics. Further, variousfabrication technologies, such as phase separation, electrospinning, and 3D printing, of PLLA-basedscaffolds are scrutinized along with the in vitro and in vivo applications employed in various tissuerepair strategies. Overall, this review focuses on the properties and applications of PLLA in theTE field, finally affording an insight into future directions and challenges to address an effectiveimprovement of scaffold properties

effect of cold drawing on mechanical properties of biodegradable fibers

The use of biodegradable polymers is increasingly attracting interest over the last years, since they can reduce the environmental effects related to disposal of traditional plastics and, in general, the use of fossil, non-renewable resources. One of the most promising applications is represented by fibers production. However, the orientation and the crystallinity degrees can significantly affect the mechanical properties. Therefore, it is of interest to investigate on the optimum processing conditions, in order to improve the mechanical properties. In particular, while crystallinity can be slightly modified by the processing, orientation can be significantly improved. In this work, the effects of hot stretching on the mechanical and structural properties of fibers made from two different families of biodegradable blends were investigated. The orientation proved to significantly change the mechanical properties, and it was shown that factors such as the different relaxation times, the different crystallization temperatures and the cooling rate can give opposite effects in the three investigated polymer systems with significant consequences on the mechanical behaviour of the fibers. In particular, the behaviour during fiber production in hot stretching, and the orientation mechanisms were studied and explained on the basis of rheological and thermal properties of the polymers

Effect of a compatibilizer on the morphology and properties of polypropylene/polyethylentherephthalate spun fibers

Fibers spun by melt spinning of binary and ternary polypropylene/ polyethylenetherephthalate blends have been produced and characterized in order to investigate the effect of a compatibilizer on their morphology and mechanical properties. The compatibilizer was a maleic anhydride-functionalized rubber copolymer. The effect of the compatibilizer was well evident in the isotropic state, as the morphology became very fine, the size of the dispersed particles was very small, and the adhesion was better. The effect of the compatibilizer on the mechanical properties is very relevant, especially in the elongation at break. On the contrary, no relevant effect was observed in the anisotropic oriented fibers. Although the average diameter of the microfibrils of the dispersed phase of the compatibilized blend generated during the hot drawing was much smaller than that of the microfibrils of the same particles of the uncompatibilized blend, the mechanical properties were almost the same. This behavior has been attributed to the length of the smaller microfibrils of the ternary blends, which was lower that of the microfibrils of the binary blend. This has been explained in terms of reduced initial droplet size, and therefore of lesser possibility of stretching the droplets to very long fibrils in these samples

Compatibilization of Polypropylene/Polyamide 6 Blend Fibers Using Photo-Oxidized Polypropylene

The use of polyamide/polyolefin blends has gained importance and concern for years, but they also show some issues to be adequately addressed, such as the incompatibility between the two components. This is usually overcome by using suitable compatibilizers, typically based on functionalized polyolefins. However, there is only little information about the use of a degraded polyolefins to induce compatibilization. This is even truer, as far as polyamide 6/polypropylene (PA6/PP) blends are concerned. In this work, compatibilization of PA6/PP blends by using small amounts of photo-oxidized PP was investigated; furthermore, the effects due to the presence of the photo-oxidized PP were studied also in relationship to the spinning operation, where the existence of the non-isothermal elongational flow can lead to significant, further morphological changes. It was found that isotropic samples showed significant enhancements of the tensile properties upon adding the photo-oxidized PP. Under non-isothermal elongational flow conditions, the presence of the photo-oxidized PP was particularly effective in improving the mechanical properties in comparison to the uncompatibilized blend fibers. Furthermore, an important result was found: The elongational-flow processing allowed obtaining anisotropic samples where the improvements of the properties, in comparison to the isotropic samples, were similar to those achieved by using a compatibilizer

The effect of low frequency noise on the behaviour of juvenile Sparus aurata

[EN] Anthropogenic activities are causing increased noise levels in the marine environment. To date, few studies have been undertaken to investigate the effects of different noise frequencies on the behaviour of juvenile fish. In this study, the behavioural changes of juvenile gilthead seabream (Sparus aurata) are evaluated when exposed to white noise filtered in third-octave bands centred at 63, 125, 500, and 1000 Hz (sound pressure level, 140-150 dB re 1 mu& x3a1;a) for 7 h. The group dispersion, motility, and swimming height of the fish were analysed before and during the acoustic emission. Dispersion of the fish was found to reduce immediately upon application of low frequency sound (63 and 125 Hz) with a return to control condition after 2 h (indicative of habituation), whereas at 1 kHz, dispersion increased after 2 h without any habituation. The motility decreased significantly at 63 Hz throughout the 7 h of sound exposure. The swimming height decreased significantly for all frequencies other than 125 Hz. The results of this study highlight significant variations in the behavioural responses of juvenile fish that could have consequences on their fitness and survival.This study was conducted in the framework of the Ph.D. program in the Mediterranean Biodiversity XXXII cycle (International) of the University of Palermo. I.P.-A., M.B.-C. and V.E. acknowledge the financial support of the European Comission-Project No. 11.0661/2018794607/SUB/ENV.C2, risk-based approaches to good environmental status (RAGES). The other founding support comes from the Ph.D. Innovative with Industrial Characterization Programma Operativo Nazionale (PON) 2014-2020 and the projects bilateral Research laboratory on marine and maritime Science Italy-Argentina (CAIMAR) Joint Laboratory Italy-Argentina (Laboratori Congiunti Bilaterali Internazionali of the Italian National Reseach Council, 2017-2019). DocumentMauro, M.; Pérez Arjona, I.; Belda, E.; Ceraulo, M.; Bou-Cabo, M.; Benson, T.; Espinosa Roselló, V.... (2020). The effect of low frequency noise on the behaviour of juvenile Sparus aurata. The Journal of the Acoustical Society of America. 147(6):3795-3807. https://doi.org/10.1121/10.0001255S37953807147