Invited review: Genetics and modeling of milk coagulation properties

AbstractMilk coagulation properties (MCP) are conventionally measured using computerized renneting meters, mechanical or optical devices that record curd firmness over time (CFt). The traditional MCP are rennet coagulation time (RCT, min), curd firmness (a30, mm), and curd-firming time (k20, min). The milk of different ruminant species varies in terms of CFt pattern. Milk from Holstein-Friesian and some Scandinavian cattle breeds yields higher proportions of noncoagulating samples, samples with longer RCT and lower a30, and samples for which k20 is not estimable, than does milk from Brown Swiss, Simmental, and other local Alpine breeds. The amount, proportion, and genetic variants (especially κ-casein) of milk protein fractions strongly influence MCP and explain variable proportions of the observed differences among breeds and among individuals of the same breed. In addition, other major genes have been shown to affect MCP. Individual repeatability of MCP is high, whereas any herd effect is low; thus, the improvement of MCP should be based principally on selection. Exploitable additive genetic variation in MCP exists and has been assessed using different breeds in various countries. Several models have been formulated that either handle noncoagulating samples or not. The heritability of MCP is similar to that of other milk quality traits and is higher than the heritability of milk yield. Rennet coagulation time and a30 are highly correlated, both phenotypically and genetically. This means that the use of a30 data does not add valuable information to that obtainable from RCT; both traits are genetically correlated mainly with milk acidity. Moreover, a30 is correlated with casein content. The major limitations of traditional MCP can be overcome by prolonging the observation period and by using a novel CFt modeling, which uses all available information provided by computerized renneting meters and allows the estimation of RCT, the potential asymptotic curd firmness, the curd-firming rate, and the syneresis rate. Direct measurements of RCT obtained from both mechanical and optical devices show similar heritabilities and exhibit high phenotypic and genetic correlations. Moreover, mid-infrared reflectance spectroscopy can predict MCP. The heritabilities of predicted MCP are higher than those of measured MCP, and the 2 sets of values are strongly correlated. Therefore, mid-infrared reflectance spectroscopy is a reliable and cheap method whereby MCP can be improved at the population level; this is because such spectra are already routinely acquired from the milk of cows enrolled in milk recording schemes

Volatile fingerprinting of ripened cheese for authentication and characterisation of different dairy systems

Authentication of dairy systems is of growing interest for the dairy industry and we investigated the potentiality of using volatile fingerprinting of ripened cheeses by proton transfer reaction time-of-flight mass spectrometry. A total of 1,075 individual model cheeses made from milk of individual Brown Swiss cows of 72 farms were analysed. Using a linear discriminant analysis, cows and herds were assigned to 3 or 5 dairy systems differing in management, available facilities, and diets. We obtained variable discrimination abilities (up to 77% of correct classification of cheeses and 70% of farms with cross-validation). We found m/z 61,028 (acetic acid), 109,070 (pyrazine), and m/z 137,132 (terpene) characterising model cheeses from traditional dairy systems and m/z 71,086 (3-methyl-butan-1-ol, 3-methyl-3-buten-1-ol, pentan-1-ol), m/z 101,097 (hexan-2-one, hexanal), m/z 123,117 (nonenal), m/z 129,127 (octan-1-one, octanal), and two unidentified peaks m/z 83,071 and m/z 93,090 characterising model cheeses from the modern farms. In conclusion, it seems possible to discriminate between a range of dairy systems using fast volatile fingerprinting of ripened cheeses but a proper validation of results obtained is needed.Highlights Mass spectrometry technique (PTR-ToF-MS) was able to discriminate between dairy systems. We found m/z 61,028 (acetic acid), 109,070 (pyrazine), and m/z 137,132 (terpene) characterising model cheeses from traditional dairy systems. We found m/z 71,086 (3-methyl-butan-1-ol, 3-methyl-3-buten-1-ol, pentan-1-ol), m/z 101,097 (hexan-2-one, hexanal), m/z 123,117 (nonenal), m/z 129,127 (octan-1-one, octanal), and two unidentified peaks m/z 83,071 and m/z 93,090 characterising model cheeses from the modern farms

Two similar commercial live attenuated AMPV vaccines prepared by random passage of the identical field isolate, have unrelated sequences

Since late \u201880 s Avian metapneumovirus subtype A causes sufficient disease in Europe for commercial companies to have started developing live attenuated vaccines. Here, two of those vaccines were fully consensus sequenced alongside their progenitor field strain (#8544). Sequences comparison shows that the attenuation of field strain #8544 was associated with no common substitutions between the two derived vaccines. This finding suggests that the attenuation of field viruses via serial passage on cell cultures or tissues is the result of a random process, rather than a mechanism aiming to achieve a specific sequence. Furthermore, field vaccination strategies would greatly benefit by the unambiguous vaccine markers identified in this study, enabling a prompt and confident vaccines detection

near infrared reflectance spectroscopy predictions as indicator traits in breeding programs for enhanced beef quality

n/

the effects of control measures on the economic burden associated with epidemics of avian influenza in italy

In 1999, Italy experienced a devastating epidemic of high-pathogenicity avian influenza (HPAI) caused by an H7N1 virus subtype. After this epidemic, a ministerial decree was passed to implement control measures for low-pathogenicity avian influenza (LPAI) due to H5 and H7 subtypes. We investigated whether these control measures have decreased the public expenditure associated with epidemics of LPAI and HPAI by comparing the direct and consequential losses of the 1999 epidemic to the losses associated with successive epidemics. The estimated total economic burden of the epidemics was about euro650 million (euro217 million in direct losses and euro433 million in consequential losses). The 1999 epidemic accounted for most of these losses (euro507 million: euro112 million in direct losses and euro395 million in consequential losses), whereas the total economic burden for the 5 successive LPAI was euro143 million (euro105 million in direct losses and euro38 million in consequential losses). These results demonstrate that the implementation of a coordinated set of disease-control measures, which included both emergency and prophylactic vaccination, was able to reduce the overall costs associated with avian influenza epidemics. The results also show that the application of adequate LPAI control measures may limit the risk of emergence of an HPAI virus in an area with a high poultry density, allowing the complete disruption of the poultry market and its huge associated costs to be avoided

Technological quality, mineral profile, and sensory attributes of broiler chicken breasts affected by White Striping and Wooden Breast myopathies.

ABSTRACT The aim of the research was to study the impact of white striping and wooden breast myopathies on the technological quality, mineral, and sensory profile of poultry meat. With this purpose, a total of 138 breasts were selected for a control group with normal breasts (N), a group of breasts characterised by white striping (WS) myopathy, and a group of breasts having both white striping and wooden breast myopathies (WSWB). Data revealed that the simultaneous presence of the two myopathies, with respect to the WS lesion individually considered, had a further detrimental effect on pH (6.04 vs. 5.96;

Short communication: Factors affecting coagulation properties of Mediterranean buffalo milk

Abstract The aim of this study was to investigate sources of variation of milk coagulation properties (MCP) of buffalo cows. Individual milk samples were collected from 200 animals in 5 herds located in northern Italy from January to March 2010. Rennet coagulation time (RCT, min) and curd firmness after 30min from rennet addition (a 30 , mm) were measured using the Formagraph instrument (Foss Electric, Hillerod, Denmark). In addition to MCP, information on milk yield, fat, protein, and casein contents, pH, and somatic cell count (SCC) was available. Sources of variation of RCT and a 30 were investigated using a linear model that included fixed effects of herd, days in milk (DIM), parity, fat content, casein content (only for a 30 ), and pH. The coefficient of determination was 51% for RCT and 48% for a 30 . The most important sources of variation of MCP were the herd and pH effects, followed by DIM and fat content for RCT, and casein content for a 30 . The relevance of acidity in explaining the variation of both RCT and a 30 , and of casein content in explaining that of a 30 , confirmed previous studies on dairy cows. Although future research is needed to investigate the effect of these sources of variation on cheese yield, findings from the present study suggest that casein content and acidity may be used as indicator traits to improve technological properties of buffalo milk

Genetic correlations between measures of beef quality traits and their predictions by near-infrared spectroscopy in the Piemontese cattle breed.

The aims of this study were to predict beef quality traits (BQ: colour, shear force, drip and cooking losses) of Piemontese cattle using near-infrared spectroscopy (NIRS) and to estimate genetic parameters for measured BQ and their predictions by NIRS. Heritabilities and genetic correlations for measured BQ and their predictions based on NIRS were estimated through bivariate Bayesian analyses. Heritability estimates for measured BQ were of intermediate magnitude (from 0.10 to 0.63) and similar to those for NIRS predictions. The genetic correlations between BQ measures and their predictions by NIRS were very high for colour traits, high for drip loss, and nil for shear force and cooking loss. NIRS predictions can be proposed as indicator traits in breeding programs for enhancement of colour traits and drip loss

Comparison between mechanical and near-infrared methods for assessing coagulation properties of bovine milk

AbstractThe aim of the present study was to compare milk coagulation properties measured through a traditional mechanical device, the Formagraph (FRM; Foss Electric A/S, Hillerød, Denmark), and a near-infrared optical device, the Optigraph (OPT; Ysebaert SA, Frépillon, France). Individual milk samples of 913 Brown Swiss cows from 63 herds located in Trento Province (Italy) were analyzed for rennet coagulation time (RCT, min), curd-firming time (k20, min), and 2 measures of curd firmness (a30 and a45,mm) using the 2 instruments and under identical conditions. The trial was performed in the same laboratory, by the same technician, and following the same procedures. Extending the analysis by either instrument to 90min permitted RCT and k20 values to be obtained even for late-coagulating milk samples. Milk coagulation properties measured using the OPT differed considerably from those obtained using the FRM. The average k20 values varied greatly (8.16 vs. 5.36min for the OPT and the FRM, respectively), as did the a45 figures (41.49 vs. 33.66mm for the OPT and the FRM, respectively). The proportion of noncoagulating samples for which k20 could be estimated differed between instruments, being less for the OPT. The between-instrument correlation coefficients were either moderate (0.48 for a30) or low (0.24 and 0.17 for k20 and a45, respectively) when the same traits were compared. The correlations between k20 and a45, and milk yield varied among instruments, as did the correlations between k20, a30, and a45 and milk composition, and the correlations between a45 and pH. The relative influence of days in milk on k20 and a45 varied, as did the effect of parity on a45 and that of the measuring unit of coagulation meter on k20 and a30. The RCT estimated by the OPT was the only milk coagulation property to show good agreement with the FRM-derived value, although this was not true for the data from late-coagulating samples