9,553 research outputs found
Development of a container for handling, testing, and storing discrete microelectronic components
A container has been developed for handling, testing, burning-in, and storing discrete microelectronic components without removal from the protective package. The package was designed to accommodate the leadless inverted device and other carrier-mounted active devices and chip-type discrete resistors and capacitors. Before the indicated development, components were handled and tested in various ways, some of which resulted in damage or contamination. The basic design of the container utilizes precision machined printed circuit boards and chemically milled (photoetched) contact springs. Included in this design for protection is an O-ring-sealed cover. Methods of fabrication and limitations of the current hardware are presented. Current applications of and possible extensions to the technology are discussed
High-resolution UAV imagery for field olive (Olea europaea L.) phenotyping
Remote sensing techniques based on images acquired from unmanned aerial vehicles (UAVs) could represent an effective tool to speed up the data acquisition process in phenotyping trials and, consequently, to reduce the time and cost of the field work. In this study, we assessed the ability of a UAV equipped with RGB-NIR cameras in highlighting differences in geometrical and spectral canopy characteristics between eight olive cultivars planted at different planting distances in a hedgerow olive orchard. The relationships between measured and estimated canopy height, projected canopy area and canopy volume were linear regardless of the different cultivars and planting distances (RMSE of 0.12 m, 0.44m2 and 0.68m3, respectively). Agood relationship (R2 = 0.95) was found between the pruning mass material weighted on the ground and its volume estimated by aerial images. NDVI measured in February 2019 was related to fruit yield per tree measured in November 2018, whereas no relationships were observed with the fruit yield measured in November 2019 due to abiotic and biotic stresses that occurred before harvest. These results confirm the reliability of UAV imagery and structure from motion techniques in estimating the olive geometrical canopy characteristics and suggest further potential applications of UAVs in early discrimination of yield efficiency between different cultivars and in estimating the pruning material volume
Pool temperature stratification analysis in CIRCE-ICE facility with RELAP5-3D© model and comparison with experimental tests
In the frame of heavy liquid metal (HLM) technology development, CIRCE pool facility at ENEA/Brasimone Research Center was updated by installing ICE (Integral Circulation Experiments) test section which simulates the thermal behavior of a primary system in a HLM cooled pool reactor. The experimental campaign led to the characterization of mixed convection and thermal stratification in a HLM pool in safety relevant conditions and to the distribution of experimental data for the validation of CFD and system codes. For this purpose, several thermocouples were installed into the pool using 4 vertical supports in different circumferential position for a total of 119 thermocouples [1][2]. The aim of this work is to investigate the capability of the system code RELAP5-3D (c) to simulate mixed convection and thermal stratification phenomena in a HLM pool in steady state conditions by comparing code results with experimental data. The pool has been simulated by a 3D component divided into 1728 volumes, 119 of which are centered in the exact position of the thermocouples. Three dimensional model of the pool is completed with a mono-dimensional nodalization of the primary main flow path. The results obtained by code simulations are compared with a steady state condition carried out in the experimental campaign. Results of axial, radial and azimuthal temperature profile into the pool are in agreement with the available experimental data Furthermore the code is able to well simulate operating conditions into the main flow path of the test section
Effectiveness of entomopathogenic nematodes in the control of Cydia pomonella larvae in Northern Italy
Since 2006, a large scale research on the effectiveness of entomopathogenic nematodes
(EPN) in the control of codling moth (CM), Cydia pomonella, overwintering larvae has
been performed on about 35 ha of pear orchards per year in Emilia-Romagna, Northern
Italy. Steinernema carpocapsae and Steinernema feltiae activity was checked after spray
applications of EPNs to the trunk and branches. In 2006, the treatment was applied either
in spring or in autumn at different doses, before CM pupation; in 2007 the EPN treatment
was applied only in autumn at 1.5 x 109 I.J. ha –1. Every year it was distributed by means of
a conventional mist blower. The larval mortality was assessed directly on sentinel larvae in
card boards on the trunks and indirectly on the eggs laid by the females of the first CM
generation in spring. Moreover, each year, a trial was performed applying only S.
carpocapsae on sentinel larvae with the aim of testing this nematode at suitable
temperatures but at different water volumes.
The CM sentinel larvae were effectively parasitized after autumnal EPN application.
Moreover, the egg assessment demonstrated a good decrease in CM population in spring
2007, when EPNs had been applied at the best weather conditions (t° 12-14 °C and rain)
in the previous autumn
Toward the valorization of olive (Olea europaea var. europaea L.) biodiversity: horticultural performance of seven Sicilian cultivars in a hedgerow planting system
An intense survey of the Sicilian's olive growing areas for autochthonous germplasm, mainly represented by centennials olive trees (Olea europaea var. europaea L.) apparently older then III centuries, started at the beginning of the 1980s and resulted in the selection of more than 150 cultivars and accessions. This germplasm was propagated in a nursery, by grafting onto seedlings of Olea europaea L., and planted in an experimental orchard, in an olive district located in the South-west of the Island, where they were evaluated for over 30 years and selected for their early bearing, high and constant productivity, as well as high oil content of the fruits and excellent chemical (oleic acid and phenol content) and organoleptic profile of the oil. This paper reports data on the horticultural performances (production, vigor, crop efficiency and oil quality) of four cultivars (\u2018Kalat\u2019, \u2018Olivo di Mandanici\u2019, \u2018Abunara\u2019 and \u2018Minuta\u2019), selected within the Sicilian's autochthonous germplasm trained as 'Free Palmetta' and tested in a hedgerow planting system at three different planting densities: 500, 666 and 1000 trees ha-1. The cultivar \u2018Nocellara del Belice\u2019, \u2018Cerasuola, and \u2018Biancolilla\u2019, widely cultivated in the area where the trial was carried out, were used as references. The outstanding performance of the cultivar \u2018Kalat\u2019 at planting density of 1000 trees ha 121, suggests that this cultivar can be a promising choice for the super high density orchards (SHD). The other cultivars tested did not performed as \u2018Kalat\u2019 and seem not suitable for SHD planting system due to their high vigor. The hedgerow planting system tested, in the first 6 years of planting, increaseed productivity of all cultivars compared to traditional olive orchard typical of the area where the trial was conducted. This hedgerow olive orchard may represent a valid solution to increase orchard productivity and to reduce harvest costs by mechanization, depending on tree high, with straddle or side by side canopy contact machines. Achieve higher yield and reducing management costs using autochthonous, resilient cultivars, could be a new strategy to counteract climate changes. The unique organoleptic profiles of the oils obtained from the cultivars tested, could improve the offer of tasty, flavored and nutraceutical extra virgin olive oils in the international markets. Results highlight the importance of preserving and valorizing biodiversity to increase productivity and resiliency of agricultural systems, facing continuous, fast and deep social and environmental changes
A novel DR/NIR T-shaped aiegen: Synthesis and x-ray crystal structure study
We developed a new benzodifuran derivative as the condensation product between 2,6-diamino-4-(4-nitrophenyl)benzo[1,2-b:4,5-b’]difuran-3,7-dicarboxylate and 3-hydroxy-2-naphthaldehyde. The intramolecular hydrogen-bond interactions in the terminal half-salen moieties produce a sterically encumbered highly conjugated main plane and a D-A-D (donor-acceptor-donor) T-shaped structure. The novel AIEgen (aggregation-induced enhanced emission generator) fulfils the requirement of RIR (restriction of intramolecular rotation) molecules. DR/NIR (deep red/near infrared) emission was recorded in solution and in the solid state, with a noteworthy photoluminescence quantum yield recorded on the neat crystals which undergo some mechanochromism. The crystal structure study of the probe from data collected at a synchrotron X-ray source shows a main aromatic plane π-stacked in a columnar arrangement
Pre-test analysis of protected loss of primary pump transients in CIRCE-HERO facility
In the frame of LEADER project (Lead-cooled European Advanced Demonstration Reactor), a new configuration of the steam generator for ALFRED (Advanced Lead Fast Reactor European Demonstrator) was proposed. The new concept is a super-heated steam generator, double wall bayonet tube type with leakage monitoring [1]. In order to support the new steam generator concept, in the framework of Horizon 2020 SESAME project (thermal hydraulics Simulations and Experiments for the Safety Assessment of MEtal cooled reactors), the ENEA CIRCE pool facility will be refurbished to host the HERO (Heavy liquid mEtal pRessurized water cOoled tubes) test section to investigate a bundle of seven full scale bayonet tubes in ALFRED-like thermal hydraulics conditions. The aim of this work is to verify thermofluid dynamic performance of HERO during the transition from nominal to natural circulation condition. The simulations have been performed with RELAP5-3D© by using the validated geometrical model of the previous CIRCE-ICE test section [2], in which the preceding heat exchanger has been replaced by the new bayonet bundle model. Several calculations have been carried out to identify thermal hydraulics performance in different steady state conditions. The previous calculations represent the starting points of transient tests aimed at investigating the operation in natural circulation. The transient tests consist of the protected loss of primary pump, obtained by reducing feed-water mass flow to simulate the activation of DHR (Decay
Heat Removal) system, and of the loss of DHR function in hot conditions, where feed-water mass flow rate is absent. According to simulations, in nominal conditions, HERO bayonet bundle offers excellent thermal hydraulic behavior and, moreover, it allows the operation in natural circulation
Post-test simulation of a PLOFA transient test in the CIRCE-HERO facility
CIRCE is a lead–bismuth eutectic alloy (LBE) pool facility aimed to simulate the primary system of a heavy liquid metal (HLM) cooled pool-type fast reactor. The experimental facility was implemented with a new test section, called HERO (Heavy liquid mEtal pRessurized water cOoled tubes), which consists of a steam generator composed of seven double-wall bayonet tubes (DWBT) with an active length of six meters. The experimental campaign aims to investigate HERO behavior, which is representative of the tubes that will compose ALFRED SG. In the framework of the Horizon 2020 SESAME project, a transient test was selected for the realization of a validation benchmark. The test consists of a protected loss of flow accident (PLOFA) simulating the shutdown of primary pumps, the reactor scram and the activation of the DHR system. A RELAP5-3D© nodalization scheme was developed in the pre-test phase at DIAEE of “Sapienza” University of Rome, providing useful information to the experimentalists. The model consisted to a mono-dimensional scheme of the primary flow path and the SG secondary side, and a multi-dimensional component simulating the large LBE pool. The analysis of experimental data, provided by ENEA, has suggested to improve the thermal–hydraulic model with a more detailed nodalization scheme of the secondary loop, looking to reproduce the asymmetries observed on the DWBTs operation. The paper summarizes the post-test activity performed in the frame of the H2020 SESAME project as a contribution of the benchmark activity, highlighting a global agreement between simulations and experiment for all the primary circuit physical quantities monitored. Then, the attention is focused on the secondary system operation, where uncertainties related to the boundary conditions affect the computational results
A continuous model for the dynamical analysis of mistuned bladed rotors
Ideal bladed rotors are rotationally symmetric, as a consequence they exhibit couples of degenerate eigenmodes at coinciding frequencies. When even small imperfections are present destroying the periodicity of the structure (disorder or mistuning), each couple of degenerate eigenfrequencies splits into two distinct values (frequency split) and the corresponding modal shapes exhibit vibration amplitude peaks concentrated around few blades (localization phenomenon). In this paper a continuous model describing the in-plane vibrations of a mistuned bladed rotor is derived via the homogenization theory. Imperfections are accounted for as deviations of the mass and/or stiffness of some blades from the design value; a perturbation approach is adopted in order to investigate the frequency split and localization phenomena arising in the imperfect structure. Numerical simulations show the effectiveness of the proposed model, requiring much lower computational effort than classical finite element schemes
Pro-inflammatory genetic markers of atherosclerosis
Atherosclerosis (AS) is a chronic, progressive, multifactorial disease mostly affecting large and medium-sized elastic and muscular arteries. It has formerly been considered a bland lipid storage disease. Currently, multiple independent pathways of evidence suggest this pathological condition is a peculiar form of inflammation, triggered by cholesterol-rich lipoproteins and influenced both by environmental and genetic factors. The Human Genome Project opened up the opportunity to dissect complex human traits and to understand basic pathways of multifactorial diseases such as AS. Population-based association studies have emerged as powerful tools for examining genes with a role in common multifactorial diseases that have a strong environmental component. These association studies often estimate the risk of developing a certain disease in carriers and non-carriers of a particular genetic polymorphism. Dissecting out the influence of pro-inflammatory genes within the complex pathophysiology of AS and its complications will help to provide a more complete risk assessment and complement known classical cardiovascular risk factors. The detection of a risk profile will potentially allow both the early identification of individuals susceptible to disease and the possible discovery of potential targets for drug or lifestyle modification; i.e. it will open the door to personalized medicine
- …