4,585 research outputs found
Agricultores familiares e adoção de SAF em Medicilândia, Pará.
Sistemas agroflorestais (SAF) são alternativas à s práticas agrÃcolas convencionais e de uso do solo ainda pouco utilizados por agricultores familiares do território da Transamazônica, no Sudoeste do Pará. No entanto, o municÃpio de Medicilândia diferencia-se dos demais daquela região por possuir um dos principais polos cacaueiros do paÃs. Por ser uma cultura de sub-bosque, consequentemente tolerante a sombreamento, o cacaueiro se torna propÃcio à implantação em SAF. Objetivando entender os fatores contribuem e/ou limitam a utilização dos SAF naquele municÃpio, foram aplicados questionários a 73 famÃlias agricultoras. Os principais fatores que determinavam a adoção de SAF pelos agricultores são de caráter econômico e produtivo, sendo o sombreamento, a existência de mercado e a fertilidade dos solos os fatores que se destacam para essa adoção. Em oposição, a principal limitação refere-se à insuficiência e baixa qualidade dos serviços de assistência técnica, afetando, diretamente, a produção dos sistemas uma vez que a gestão de SAF poderá reduzir, consideravelmente, a produtividade da lavoura.Editores técnicos: Roberto Porro, Milton Kanashiro, Maria do Socorro Gonçalves Ferreira, Leila Sobral Sampaio e Gladys Ferreira de Sousa
Quench Propagation and Heating in the Superconducting 600 A Auxiliary Busbars of the LHC
In the Large Hadron Collider (LHC) at CERN 22 km of flexible superconducting cable, the auxiliary busbar cable, will conduct currents of up to 600 A to a large number of corrector magnets distributed throughout the accelerator. A prototype cable with 42 active conductors underwent several experiments to measure the hot spot temperature and the quench propagation velocity as a function of the current. The former was evaluated for various energy extraction scenarios as they are foreseen for the LHC corrector circuits. The experimental results and the heat flow simulations show that the quench behavior in this busbar prototype is strongly influenced by the heat flow through the insulation material (polyimide) into the helium bath, leading to stable configurations above the critical temperature Tc for currents between 250 A and 500 A. Special attention was paid to the study of discontinuities in the wires, like feed-throughs, where the wire is not immersed in liquid helium, and joints, where the wire cross-section is increased. The experiments and simulations led to a thorough understanding of the quench process in the wires of the prototype cable, which resulted in guidelines for the design, the use and the installation of the cable in the LHC
Seismic Vulnerability of the Italian Roadway Bridge Stock
This study focuses on the seismic vulnerability evaluation of the Italian roadway bridge stock, within the framework of a Civil Protection sponsored project. A comprehensive database of existing bridges (17,000 bridges with different level of knowledge) was implemented. At the core of the study stands a procedure for automatically carrying out state-of-the-art analytical evaluation of fragility curves for two performance levels – damage and collapse – on an individual bridge basis. A webGIS was developed to handle data and results. The main outputs are maps of bridge seismic risk (from the fragilities and the hazard maps) at the national level and real-time scenario damage-probability maps (from the fragilities and the scenario shake maps). In the latter case the webGIS also performs network analysis to identify routes to be followed by rescue teams. Consistency of the fragility derivation over the entire bridge stock is regarded as a major advantage of the adopted approach
Proposed Method for the Verification of the LHC Bus Bar Splices during Commissioning at Cryogenic Conditions
The commissioning of the Large Hadron Collider at CERN includes the powering of about 1600 superconducting electrical circuits to currents ranging from 55 A to 11.8 kA. A large number of splices (over 70'000) are present at the magnet interconnects, which can only be validated with current at cryogenic conditions. This paper discusses the thermal effects related to possible faulty splices during the powering of the circuits. The calculations of the quench and detection currents, as well as the hot spot temperatures, are described. The heat transfer model with the surrounding coolant and the current profiles inside the splices are presented. This study is completed with a sensitivity analysis on the hot spot temperature with respect to the model parameters. Finally, the implications with respect to the powering ramps and parameters to be applied during the first powering are discussed
Quench Propagation in the Superconducting 6 kA Flexible Busbars of the LHC
Flexible superconducting cables with currents up to 6 kA will be used to power magnets individually in the insertion regions of the LHC. In case of a quench, the currents in these circuits will decay very fast (with time constants of about 200 ms) such that relatively small copper cross sections are sufficient for these busbars. Quench propagation experiments on a prototype cable and corresponding simulations led to a detailed understanding of the quench behavior of these busbars and to recommendations for the design and application of the cable. Simulations of the quench process in a multi-strand conductor led to a detailed understanding of the way current crosses from superconducting to pure copper strands and how this affects the quench propagation velocity. At nominal current (6 kA), the quench propagation velocities are high (10 m/s) and the hot spot temperature increases rapidly. In this situation, timely quench detection and energy extraction (current reduction) are vital to prevent damage of circuit components
ATR-FTIR chemical screening for adulterants and sugar characterisation in honeys
The search for improvements in honey analysis is an important topic due to the relevance that adulterations and variations of sugar composition have in this food.
Attenuated Total Reflectance Fourier Transform InfraRed spectroscopy (ATR-FTIR) is a reliable and fast analytical instrumentation for analysis of liquids, semi-solids and solids, which is currently used in food chemistry for qualitative and quantitative investigations.
This work is aimed to build a fast analytical method, using ATR-FTIR and Partial Least Square (PLS) chemometric tool, to quantitative determination of glucose, fructose and sucrose present in honeys.
We analyzed 25 honeys from Trentino and Sicily and a significant spectral range from the whole ATR-FTIR spectra were selected. Then a PLS multivariate calibration model was built by using mixtures of glucose, fructose and sucrose at various concentration. Samples for cross-validation were selected, thereby allowing quantitative evaluation of glucose, fructose and sucrose in all samples. Furthermore, a representative number of honeys were mixed with common adulterant syrups to simulate adulteration procedures and to verify the reliability of the ATR-FTIR technique in recognizing them.
Preliminary results revealed not only the quantitative reliability of ATR-FTIR spectroscopy in the evaluation of sugars in honeys, but also its ability in recognizing honey adulteration
Sistema roça sem queimar como modelo alternativo de manejo agroflorestal.
O sistema Roça Sem Queimar ? RSQ, que consiste na implantação de cultivos sem a utilização do fogo no preparo de área, vem sendo apoiado desde o ano de 2000 por instituições como o Sindicato dos Trabalhadores e Trabalhadoras Rurais de Medicilândia - STTR, no estado do Pará. Atualmente o STTR desenvolve com apoio do Ministério do Meio Ambiente (MMA) o Projeto Roça Sem Queimar III, iniciado em 2011 e que possui como beneficiários 38 agricultores familiares do municÃpio de Medicilândia e 21 de Brasil Novo. Com o objetivo de analisar os fatores que contribuem para a adoção do sistema roça sem queimar, os resultados produzidos e as contribuições do Projeto para as mudanças, realizou-se entrevistas com 35 agricultores de Medicilândia durante o mês de abril de 2013. Os resultados apontaram que o uso do sistema tradicional de preparo de área, corte e queima, vem reduzindo devido aos impactos ambientais que causa. Aliado a outros fatores, essa redução vem contribuindo para o aumento na utilização do sistema RSQ. Os entrevistados destacam que tal sistema ?dá certo? e tem proporcionado mudanças ao solo, à produção, à saúde e ao meio ambiente. Portanto, mudanças vêm ocorrendo ao longo da trajetória e os impactos do uso de técnicas tradicionais são percebidas pelos agricultores, que tem buscado modelos alternativos
Design and validation of a hardware-in-the-loop test bench for evaluating the performance of an active mass damper
The purpose of this study is to propose an innovative solution for evaluating the performance of a full-scale Active Mass Damper (AMD). The AMD adopted is a custom hydraulic actuator, developed for active control of existing buildings against earthquakes. For vibration control, a sky-hook algorithm was implemented. Its characteristics ensure good robustness, which is fundamental in structural engineering since buildings are subjected to significant variation in dynamic properties in presence of damage or ambient conditions. A Hardware-In-the-Loop (HIL) test bench was specifically designed to simulate the actual working condition of the anti-seismic system. The HIL setup consists of a shaking table moved by a hydraulic actuator in accordance with the roof's displacement, evaluated using a structural numerical model of the building to which the AMD is fixed. The presence of two distinct active systems (HIL and AMD) could generate control issues; therefore, a Triple Variable Control logic was introduced to reduce the interaction delay. The effectiveness of the proposed AMD is validated comparing the roof's displacement in an uncontrolled structure with that in a controlled one. Also, the robustness of the control algorithm was verified using a non-linear structural model and applying seismic excitation at different intensities
Relationship of glycaemic control and hypoglycaemic episodes to 4-year cardiovascular outcomes in people with type 2 diabetes starting insulin
AIMS: To examine the relationships between glycated haemoglobin (HbA1c) and cardiovascular (CV) events in people beginning insulin in routine clinical practice in Europe, North America and Asia in a non-interventional study, the Cardiovascular Risk Evaluation in people with Type 2 Diabetes on Insulin Therapy (CREDIT) study. METHODS: Data on 2999 people were collected prospectively over 4 years from physician reports. The primary outcome was the composite of stroke or myocardial infarction (MI) or CV-specific death. Events were blindly adjudicated. The relative hazards of CV events were described from Cox proportional hazards models incorporating patient risk factors, with updated average HbA1c as a time-dependent covariate. The relationship of severe and symptomatic hypoglycaemia (collected during the 6 months before yearly ascertainment) with CV and all-cause mortality was examined. RESULTS: A total of 147 primary events were accrued during up to 54 months of follow-up. In all, 60 CV-specific deaths, 44 non-fatal MIs and 57 non-fatal strokes occurred, totalling 161 events. There was a significant positive relationship between updated mean HbA1c and primary outcome: hazard ratio (HR) 1.25 [95% confidence interval (CI) 1.12-1.40; p < 0.0001]. CV death [HR 1.31 (95% CI 1.10-1.57); p = 0.0027] and stroke [HR 1.36 (95% CI 1.17-1.59); p < 0.0001] were both strongly associated with HbA1c, while MI was not [HR 1.05 (95% CI 0.83-1.32)]. One or more severe hypoglycaemic episodes affected 175 participants, while 1508 participants experienced one or more symptomatic hypoglycaemic events. We found no relationship between severe/symptomatic hypoglycaemic events and CV-specific/all-cause death. CONCLUSIONS: Ongoing poorer glucose control was associated with CV events; hypoglycaemia was not associated with CV-specific/all-cause death
Application of a prioritisation scheme for seismic intervention in schools buildings in Italy
A risk management framework has recently been developed to assign priorities for the rehabilitation of school buildings in Italy, and to give timescales within which retrofit or demolition must take place. Since it is not practical to carry out a detailed assessment of the 60,000 Italian state and public schools, the framework is a multiple-level procedure which aims to identify the highest-risk buildings based on filters of increasing detail, and reduces the size of the building inventory at each step. The first risk ranking is based on a strength deficit, which measures the difference between the current design forces defined for the building site and an estimation of the level of seismic resistance which was required at the time of design. The second ranking is based on lateral strength calculations that are already available for a large portion of the Italian masonry building stock, and that are obtained from a survey form that is familiar to Italian engineers. Finally, a simplified displacement-based methodology is used to give a more accurate assessment of seismic risk based on a limited amount of geometrical and material data. The final assessment leads to a capacity ratio and a risk rating, which are used within a transparent procedure to assign priorities for seismic intervention, and timescales within which detailed assessment leading to retrofit or demolition must take place. The first step of the methodology has been applied herein to the school building stock within two Regions in Italy and preliminary results are presented
- …