The relationship between attachment style, anxiety sensitivity and interpretive bias among adolescent nonclinical panickers

Elevated anxiety sensitivity and the tendency to catastrophically misinterpret ambiguous bodily sensations has been demonstrated in people who experience nonclinical levels of panic (Richards, Austin, & Alvarenga, 2001), and anxiety sensitivity has been shown to be associated with insecure attachment in adolescents and young adults (Weems, Berman, Silverman, and Saavedra, 2001). This study investigated the relationship between attachment style, anxiety sensitivity and catastrophic misinterpretation among 11 nonclinical panickers and 58 nonanxious controls aged 18 to 19 years. Participants completed the Brief Bodily Sensations Interpretation Questionnaire (BBSIQ), Anxiety Sensitivity Index (ASI) and an attachment questionnaire. The hypothesis that insecurely attached individuals would demonstrate greater catastrophic misinterpretation and higher anxiety sensitivity than securely attached individuals was not supported; however, nonclinical panickers gave more anxiety-related interpretations of ambiguous internal stimuli than nonanxious controls. Results do not support the notion that attachment style is related to anxiety sensitivity or catastrophic misinterpretation (regardless of panic experience). Results do, however, support the notion that anxiety-related misinterpretation of ambiguous somatic sensations precedes the onset of panic disorder

Chronic traumatic encephalopathy in contact sports: A systematic review of all reported pathological cases

© 2015 Maroon et al. Chronic traumatic encephalopathy (CTE) is a neurodegenerative disease associated with head trauma. Although initially believed to affect only boxers, the at-risk population has expanded to encompass a much wider demographic, including American football players, hockey players, wrestlers, and military veterans. This expansion has garnered considerable media attention and public concern for the potential neurodegenerative effects of head trauma. The main aim of this systematic review is to give a complete overview of the common findings and risk factors for CTE as well as the status quo regarding the incidence and prevalence of CTE. This systematic review was performed using PubMed and MEDLINE and includes all neuropathologically confirmed cases of CTE in the medical literature to date, from the first published case in 1954 to August 1, 2013 (n = 153). The demographics, including the primary source of mTBI (mild Traumatic Brain Injury), age and cause of death, ApoE genotype, and history of substance abuse, when listed, were obtained from each case report. The demographics of American football players found to have CTE are also presented separately in order to highlight the most prevalent group of CTE cases reported in recent years. These 153 case reports of CTE represent the largest collection to date. We found that a history of mTBI was the only risk factor consistently associated with CTE. In addition, we found no relationships between CTE and age of death or abnormal ApoE allele. Suicide and the presence of premorbid dementia was not strongly associated with CTE. We conclude that the incidence of CTE remains unknown due to the lack of large, longitudinal studies. Furthermore, the neuropathological and clinical findings related to CTE overlap with many common neurodegenerative diseases. Our review reveals significant limitations of the current CTE case reporting and questions the widespread existence of CTE in contact sports

On Writ of Certiorari to the United States Court of Appeals for the Ninth Circuit, Brief of Product Liability Advisory Council, Inc., National Association of Manufacturers, Business Roundtable, and Chemical Manufacturers Association as Amici Curiae in Support of Respondent, William Daubert and Joyce Daubert, Individually and as Guardians Ad Litem for Jason Daubert, and Anita De Young, Individually and as Gaurdian Ad Litem for Eric Schuller v. Merrell Dow Pharmaceuticals, Inc.

The Federal Rules of Evidence exclude expert scientific testimony when it has been developed without regard for accepted scientific methods. This case focuses on expert scientific evidence. Such evidence plays a vital and often dispositive role in modern litigation. For scientific evidence to be helpful to the factfinder it must meet some minimal threshold of reliability. To hold otherwise would be to allow a system of adjudication based more on chance than on reason

Association of a missense mutation in the bovine leptin gene with carcass fat content and leptin mRNA levels

Previously, we have shown that alleles of the BM1500 microsatellite, located 3.6 kb downstream of the leptin gene in cattle, were associated with carcass fat measures in a population of 154 unrelated beef bulls. Subsequently, a cytosine (C) to thymine (T) transition that encoded an amino acid change of an arginine to a cysteine was identified in exon 2 of the leptin gene. A PCR-RFLP was designed and allele frequencies in four beef breeds were correlated with levels of carcass fat. The T allele was associated with fatter carcasses and the C allele with leaner carcasses. The frequencies of the SNP alleles among breeds indicated that British breeds have a higher frequency of the T allele whereas the continental breeds have a higher occurrence of the C allele. A ribonuclease protection assay was developed to quantify leptin mRNA in a separate group of animals selected by genotype. Animals homozygous for thymine expressed higher levels of leptin mRNA. This may suggest that the T allele, which adds an extra cysteine to the protein, imparts a partial loss of biological function and hence could be the causative mutation

An improved catalytic pyrolysis concept for renewable aromatics from biomass involving a recycling strategy for co-produced polycyclic aromatic hydrocarbons

Catalytic pyrolysis of crude glycerol over a shaped H-ZSM-5 zeolite catalyst with (partial) recycling of the product oil was studied with the incentive to improve benzene, toluene, and xylene (BTX) yields. Recycling of the polycyclic aromatic hydrocarbon (PAH) fraction, after separation from BTX by distillation and co-feeding with the crude glycerol feed, was shown to have a positive effect on the BTX yield. Further improvements were achieved by hydrogenation of the PAH fraction using a Ru/C catalyst and hydrogen gas prior to co-pyrolysis, and BTX yields up to 16 wt% on feed were obtained. The concept was also shown to be beneficial to other biomass feeds such as e.g., Kraft lignin, cellulose, and Jatropha oil

Indication of asymptotic scaling in the reactions dd→p3dd\to p^3H, dd→n3dd\to n^3He and dp→dpdp\to dp

It is shown that the differential cross sections of the reactions $dd\to ^3He n$ and $dd\to ^3H p$ measured at c.m.s.scattering angle$\theta_{cm}=60^\circ$ in the interval of the deuteron beam energy 0.5 - 1.2 GeV demonstrate the scaling behaviour,$d\sigma/d t\sim s^{-22}$, which follows from constituent quark counting rules. It is found also that the differential cross section of the elastic $dp\to dp$ scattering at $\theta_{cm}=125^\circ-135^\circ$ follows the scaling regime $\sim s^{-16}$ at beam energies 0.5 - 5 GeV. These data are parameterized here using the Reggeon exchange.Comment: 6 pages, Latex, 2 eps figures; final version accepted by Pis'ma v ZHETF, corrected and completed reference

Ena/VASP Enabled is a highly processive actin polymerase tailored to self-assemble parallel-bundled F-actin networks with Fascin

Enabled/vasodilator-stimulated phosphoprotein (Ena/VASP) proteins are required for the formation and maintenance of filopodia, finger-like projections at the leading edge of migrating cells that are composed of parallel actin filaments bundled by Fascin. We imaged individual fluorescently labeled Drosophila Ena molecules on both single and Fascin-bundled actin filaments in vitro. Ena stimulates actin assembly by remaining continuously associated with the barbed end and increasing the elongation rate by approximately two- to threefold. Remarkably, the frequency and length of Ena’s processive runs are enhanced on filaments within a Fascin bundle, which drives a positive feedback cycle that allows the assembly of uniformly thick filopodia-like F-actin bundles composed of multiple filaments with aligned ends

Advantages of Producing Aromatics from Propene over Ethene Using Zeolite-Based Catalysts

Sustainable production of aromatics, especially benzene, toluene and xylenes (BTX), is essential considering their broad applications and the current global transition away from crude oil utilization. Aromatization of lower olefins, particularly ethene and propene, offers great potential if they are derived from more circular alternative carbon feedstocks such as biomass and waste plastics. This work aims to identify the preferred olefin feed, ethene or propene, for BTX production in a fixed-bed reactor. A commercial H-ZSM-5 (Si/Al = 23) catalyst was used as a reference catalyst, as well as a Ga-ZSM-5 catalyst, prepared by Ga ion-exchange of the H-ZSM-5 catalyst. At 773 K, 1 bar, 45 vol % olefin, 6.75 h(-1), propene aromatization over the Ga-ZSM-5 catalyst exhibited higher BTX selectivity of 55 % and resulted in slower catalyst deactivation compared to ethene aromatization

Novel Route to Produce Hydrocarbons from Woody Biomass Using Molten Salts

[Image: see text] The thermochemical decomposition of woody biomass has been widely identified as a promising route to produce renewable biofuels. More recently, the use of molten salts in combination with pyrolysis has gathered increased interest. The molten salts may act as a solvent, a heat transfer medium, and possibly also a catalyst. In this study, we report experimental studies on a process to convert woody biomass to a liquid hydrocarbon product with a very low oxygen content using molten salt pyrolysis (350–450 °C and atmospheric pressure) followed by subsequent catalytic conversions of the liquids obtained by pyrolysis. Pyrolysis of woody biomass in molten salt (ZnCl(2)/NaCl/KCl with a molar composition of 60:20:20) resulted in a liquid yield of 46 wt % at a temperature of 450 °C and a molten salt/biomass ratio of 10:1 (mass). The liquids are highly enriched in furfural (13 wt %) and acetic acid (14 wt %). To reduce complexity and experimental issues related to the production of sufficient amounts of pyrolysis oils for further catalytic upgrading, model studies were performed to convert both compounds to hydrocarbons using a three-step catalytic approach, viz., (i) ketonization of acetic acid to acetone, (ii) cross-aldol condensation between acetone and furfural to C(8)–C(13) products, followed by (iii) a two-stage catalytic hydrotreatment of the latter to liquid hydrocarbons. Ketonization of acetic acid to acetone was studied in a continuous setup over a ceria–zirconia-based catalyst at 250 °C. The catalyst showed no signs of deactivation over a period of 230 h while also achieving high selectivity toward acetone. Furfural was shown to have a negative effect on the catalyst performance, and as such, a separation step is required after pyrolysis to obtain an acetic-acid-enriched fraction. The cross-aldol condensation reaction between acetone and furfural was studied in a batch using a commercial Mg/Al hydrotalcite as the catalyst. Furfural was quantitatively converted with over 90% molar selectivity toward condensed products with a carbon number between C(8) and C(13). The two-stage hydrotreatment of the condensed product consisted of a stabilization step using a Ni-based Picula catalyst and a further deep hydrotreatment over a NiMo catalyst, in both batch setups. The final product with a residual 1.5 wt % O is rich in (cyclo)alkanes and aromatic hydrocarbons. The overall carbon yield for the four-step approach, from pinewood biomass to middle distillates, is 21%, assuming that separation of furfural and acetic acid after the pyrolysis step can be performed without losses