32,880 research outputs found

    Algorithm based comparison between the integral method and harmonic analysis of the timing jitter of diode-based and solid-state pulsed laser sources

    Get PDF
    AbstractA comparison between two methods of timing jitter calculation is presented. The integral method utilizes spectral area of the single side-band (SSB) phase noise spectrum to calculate root mean square (rms) timing jitter. In contrast the harmonic analysis exploits the uppermost noise power in high harmonics to retrieve timing fluctuation. The results obtained show that a consistent timing jitter of 1.2ps is found by the integral method and harmonic analysis in gain-switched laser diodes with an external cavity scheme. A comparison of the two approaches in noise measurement of a diode-pumped Yb:KY(WO4)2 passively mode-locked laser is also shown in which both techniques give 2ps rms timing jitter

    Predicting Natural Frequencies Of A Hydrodynamically Lubricated Journal Bearing With Constant Oil Supply Pressure

    Get PDF
    The analytical and experimental investigations reported here deal with the natural frequencies and system behavior of a full journal bearing subjected to a small sinusoidal load superimposed on a large unidirectional static load. The analysis, verified by experimentation, shows that the bearing can be regarded as two independent second-order systems acting perpendicular to each other. The variable coefficients of the equations of motion cause the bearing to behave as an underdamped system for low values of static eccentricity ratio to, and as an overdamped system for intermediate values of to. The bearing tends to be unstable above a particular to. Further analysis is needed to determine the effects resulting from changing the oil inlet pressure. © 1976 by ASME

    Resistive flow in a weakly interacting Bose-Einstein condensate

    Get PDF
    We report the direct observation of resistive flow through a weak link in a weakly interacting atomic Bose-Einstein condensate. Two weak links separate our ring-shaped superfluid atomtronic circuit into two distinct regions, a source and a drain. Motion of these weak links allows for creation of controlled flow between the source and the drain. At a critical value of the weak link velocity, we observe a transition from superfluid flow to superfluid plus resistive flow. Working in the hydrodynamic limit, we observe a conductivity that is 4 orders of magnitude larger than previously reported conductivities for a Bose-Einstein condensate with a tunnel junction. Good agreement with zero-temperature Gross-Pitaevskii simulations and a phenomenological model based on phase slips indicate that the creation of excitations plays an important role in the resulting conductivity. Our measurements of resistive flow elucidate the microscopic origin of the dissipation and pave the way for more complex atomtronic devices.Comment: Version published in PR

    Cross-sectional and plan-view cathodoluminescence of GaN partially coalesced above a nanocolumn array

    Get PDF
    The optical properties of GaN layers coalesced above an array of nanocolumns have important consequences for advanced optoelectronic devices. GaN nanocolumns coalesced using a nanoscale epitaxial overgrowth technique have been investigated by high resolution cathodoluminescence (CL) hyperspectral imaging. Plan-view microscopy reveals partially coalesced GaN layers with a sub-μm scale domain structure and distinct grain boundaries, which is mapped using CL spectroscopy showing high strain at the grain boundaries. Cross-sectional areas spanning the partially coalesced GaN and underlying nanocolumns are mapped using CL, revealing that the GaN bandedge peak shifts by about 25 meV across the partially coalesced layer of ∼2 μm thick. The GaN above the nanocolumns remains under tensile strain, probably due to Si out-diffusion from the mask or substrate. The cross-sectional data show how this strain is reduced towards the surface of the partially coalesced layer, possibly due to misalignment between adjacent partially coalesced regions

    Magnetic properties of strongly disordered electronic systems

    Full text link
    We present a unified, global perspective on the magnetic properties of strongly disordered electronic systems, with special emphasis on the case where the ground state is metallic. We review the arguments for the instability of the disordered Fermi liquid state towards the formation of local magnetic moments, and argue that their singular low temperature thermodynamics are the ``quantum Griffiths'' precursors of the quantum phase transition to a metallic spin glass; the local moment formation is therefore not directly related to the metal-insulator transition. We also review the the mean-field theory of the disordered Fermi liquid to metallic spin glass transition and describe the separate regime of ``non-Fermi liquid'' behavior at higher temperatures near the quantum critical point. The relationship to experimental results on doped semiconductors and heavy-fermion compounds is noted.Comment: 25 pages; Contribution to the Royal Society Discussion Meeting on "The Metal-Non Metal Transition in Macroscopic and Microscopic Systems", March 5-6, 199

    Partnership practice as collaborative knowledge work: Overcoming common dilemmas through an augmented view of professional expertise

    Full text link
    Purpose - The purpose of this paper is to shed new light on how partnership practices that build resilience in families work. Two broad questions are explored: first, what are the forms of expertise required in practices that effectively build resilience through partnership; and second, how can some of the challenges practitioners experience when working in partnership be addressed Design/methodology/approach - A theoretical approach is taken, framing partnership as collaborative knowledge work between practitioners and clients. Concepts of relational expertise, common knowledge and relational agency are explored as means to understand the forms of expertise involved in partnership. An empirical example is provided from practices guided by The Family Partnership Model, an approach that has been widely implemented. Findings - These concepts help to address three key challenges experienced by practitioners: client readiness for change, maintaining focus and purpose and using specialist expertise in partnership. This approach elucidates features of partnership practice that distinguish it from expert-led models, while highlighting diverse forms of expertise in play. Originality/value - The framework presented in this paper is distinctive and can be used to identify how practitioners can avoid common dilemmas, even in challenging circumstances with vulnerable families where practitioner-client relationships may be perceived as fragile. It counters the idea that partnership work dilutes professional expertise. Instead, an enriched and augmented view of professional expertise is presented
    corecore