Effects of serum proteins on corrosion behavior of ISO 5832–9 alloy modified by titania coatings

Stainless steel ISO 5832–9 type is often used to perform implants which operate in protein-containing physiological environments. The interaction between proteins and surface of the implant may affect its corrosive properties. The aim of this work was to study the effect of selected serum proteins (albumin and γ-globulins) on the corrosion of ISO 5832–9 alloy (trade name M30NW) which surface was modified by titania coatings. These coatings were obtained by sol– gel method and heated at temperatures of 400 and 800 °C. To evaluate the effect of the proteins, the corrosion tests were performed with and without the addition of proteins with concentration of 1 g L−1 to the physiological saline solution (0.9 % NaCl, pH 7.4) at 37 °C. The tests were carried out within 7 days. The following electrochemical methods were used: open circuit potential, linear polarization resistance, and electrochemical impedance spectroscopy. In addition, surface analysis by optical microscopy and X-ray photoelectron spectroscopy (XPS) method was done at the end of weekly corrosion tests. The results of corrosion tests showed that M30NW alloy both uncoated and modified with titania coatings exhibits a very good corrosion resistance during weekly exposition to corrosion medium. The best corrosion resistance in 0.9 % NaCl solution is shown by alloy samples modified by titania coating annealed at 400 °C. The serumproteins have no significant effect onto corrosion of investigated biomedical steel. The XPS results confirmed the presence of proteins on the alloy surface after 7 days of immersion in proteincontaining solutions.The investigations were supported by the National Science Centre project No. N N507 501339. The authors gratefully acknowledge Dr. Janusz Sobczak and Dr. hab. Wojciech Lisowski from Institute of Physical Chemistry of PAS for XPS surface analyses

Displacements analysis of self-excited vibrations in turning

The actual research deals with determining by a new protocol the necessary parameters considering a three-dimensional model to simulate in a realistic way the turning process on machine tool. This paper is dedicated to the experimental displacements analysis of the block tool / block workpiece with self-excited vibrations. In connexion with turning process, the self-excited vibrations domain is obtained starting from spectra of two accelerometers. The existence of a displacements plane attached to the tool edge point is revealed. This plane proves to be inclined compared to the machines tool axes. We establish that the tool tip point describes an ellipse. This ellipse is very small and can be considered as a small straight line segment for the stable cutting process (without vibrations). In unstable mode (with vibrations) the ellipse of displacements is really more visible. A difference in phase occurs between the tool tip displacements on the radial direction and on the cutting one. The feed motion direction and the cutting one are almost in phase. The values of the long and small ellipse axes (and their ratio) shows that these sizes are increasing with the feed rate value. The axis that goes through the stiffness center and the tool tip represents the maximum stiffness direction. The maximum (resp. minimum) stiffness axis of the tool is perpendicular to the large (resp. small) ellipse displacements axis. FFT analysis of the accelerometers signals allows to reach several important parameters and establish coherent correlations between tool tip displacements and the static - elastic characteristics of the machine tool components tested

Joint perception: gaze and the presence of others

Abstract We document a new phenomenon: participants' eye movements are influenced by the belief that they are either looking at pictures alone, or that a person next door is looking at the same pictures. The pictures were in sets of four. One had a positive and one a negative valence, and others were neutral. On a trial by trial basis, eye movements to the negative versus the positive pictures were modulated by participants' belief that they were looking alone or jointly. A second experiment manipulated the beliefs participants had about the person in the next cubicle, in an attempt to tease apart possible explanations for this effect of 'joint perception'. In each case, a minimal sense of cooperation with another appears to produce distinct cognitive effects, in manner similar to that found in studies of 'joint action'. We conclude that there may be a pervasive effect of social context upon cognitive and perceptual processes

Mechanisms of the Vertical Secular Heating of a Stellar Disk

We investigate the nonlinear growth stages of bending instability in stellar disks with exponential radial density profiles.We found that the unstable modes are global (the wavelengths are larger than the disk scale lengths) and that the instability saturation level is much higher than that following from a linear criterion. The instability saturation time scales are of the order of one billion years or more. For this reason, the bending instability can play an important role in the secular heating of a stellar disk in the $z$ direction. In an extensive series of numerical $N$-body simulations with a high spatial resolution, we were able to scan in detail the space of key parameters (the initial disk thickness $z_0$, the Toomre parameter $Q$, and the ratio of dark halo mass to disk mass $M_{\rm h} / M_{\rm d}$). We revealed three distinct mechanisms of disk heating in the $z$ direction: bending instability of the entire disk, bending instability of the bar, and heating on vertical inhomogeneities in the distribution of stellar matter.Comment: 22 pages including 8 figures. To be published in Astronomy Letters (v.29, 2003

8th Annual Seminar on Legal Issues for Financial Institutions

Outline of speakers\u27 presentations from the 8th Annual Seminar on Legal Issues for Financial Institutions held by UK/CLE on March 11-12, 1988

Theoretical Directional and Modulated Rates for Direct SUSY Dark Matter Detection

Exotic dark matter together with the vacuum energy (cosmological constant) seem to dominate in the flat Universe. Thus direct dark matter detection is central to particle physics and cosmology. Supersymmetry provides a natural dark matter candidate, the lightest supersymmetric particle (LSP). Furthermore from the knowledge of the density and velocity distribution of the LSP, the quark substructure of the nucleon and the nuclear structure (form factor and/or spin response function), one is able to evaluate the event rate for LSP-nucleus elastic scattering. The thus obtained event rates are, however, very low. So it is imperative to exploit the two signatures of the reaction, namely the modulation effect, i.e. the dependence of the event rate on the Earth's motion, and the directional asymmetry, i.e. the dependence of the rate on the the relative angle between the direction of the recoiling nucleus and the sun's velocity. These two signatures are studied in this paper employing various velocity distributions and a supersymmetric model with universal boundary conditions at large tan(beta).Comment: 11 LATEX pages, 1 table and 4 ps figures included. Paper presented in DARK2002, Fourth Heidelberg International Conference on Dark Matter in Astro- and Particle Physics, Cape Town, South Africa, 4-9 February, 2002, to appear in the proceedings (to be published by Springer Verlag

Dark matter and Colliders searches in the MSSM

We study the complementarity between dark matter experiments (direct detection and indirect detections) and accelerator facilities (the CERN LHC and a $\sqrt{s}= 1$ TeV $e^+e^-$ Linear Collider) in the framework of the constrained Minimal Supersymmetric Standard Model (MSSM). We show how non--universality in the scalar and gaugino sectors can affect the experimental prospects to discover the supersymmetric particles. The future experiments will cover a large part of the parameter space of the MSSM favored by WMAP constraint on the relic density, but there still exist some regions beyond reach for some extreme (fine tuned) values of the supersymmetric parameters. Whereas the Focus Point region characterized by heavy scalars will be easily probed by experiments searching for dark matter, the regions with heavy gauginos and light sfermions will be accessible more easily by collider experiments. More informations on both supersymmetry and astrophysics parameters can be thus obtained by correlating the different signals.Comment: 25 pages, 10 figures, corrected typos and reference adde

Analyzing the Impacts of Dams on Riparian Ecosystems: A Review of Research Strategies and Their Relevance to the Snake River Through Hells Canyon

River damming provides a dominant human impact on river environments worldwide, and while local impacts of reservoir flooding are immediate, subsequent ecological impacts downstream can be extensive. In this article, we assess seven research strategies for analyzing the impacts of dams and river flow regulation on riparian ecosystems. These include spatial comparisons of (1) upstream versus downstream reaches, (2) progressive downstream patterns, or (3) the dammed river versus an adjacent free-flowing or differently regulated river(s). Temporal comparisons consider (4) pre- versus post-dam, or (5) sequential post-dam conditions. However, spatial comparisons are complicated by the fact that dams are not randomly located, and temporal comparisons are commonly limited by sparse historic information. As a result, comparative approaches are often correlative and vulnerable to confounding factors. To complement these analyses, (6) flow or sediment modifications can be implemented to test causal associations. Finally, (7) process-based modeling represents a predictive approach incorporating hydrogeomorphic processes and their biological consequences. In a case study of Hells Canyon, the upstream versus downstream comparison is confounded by a dramatic geomorphic transition. Comparison of the multiple reaches below the dams should be useful, and the comparison of Snake River with the adjacent free-flowing Salmon River may provide the strongest spatial comparison. A pre- versus post-dam comparison would provide the most direct study approach, but pre-dam information is limited to historic reports and archival photographs. We conclude that multiple study approaches are essential to provide confident interpretations of ecological impacts downstream from dams, and propose a comprehensive study for Hells Canyon that integrates multiple research strategies

An Experimental Field Study of Delayed Density Dependence in Natural Populations of Aedes albopictus

Aedes albopictus, a species known to transmit dengue and chikungunya viruses, is primarily a container-inhabiting mosquito. The potential for pathogen transmission by Ae. albopictus has increased our need to understand its ecology and population dynamics. Two parameters that we know little about are the impact of direct density-dependence and delayed density-dependence in the larval stage. The present study uses a manipulative experimental design, under field conditions, to understand the impact of delayed density dependence in a natural population of Ae. albopictus in Raleigh, North Carolina. Twenty liter buckets, divided in half prior to experimentation, placed in the field accumulated rainwater and detritus, providing oviposition and larval production sites for natural populations of Ae. albopictus. Two treatments, a larvae present and larvae absent treatment, were produced in each bucket. After five weeks all larvae were removed from both treatments and the buckets were covered with fine mesh cloth. Equal numbers of first instars were added to both treatments in every bucket. Pupae were collected daily and adults were frozen as they emerged. We found a significant impact of delayed density-dependence on larval survival, development time and adult body size in containers with high larval densities. Our results indicate that delayed density-dependence will have negative impacts on the mosquito population when larval densities are high enough to deplete accessible nutrients faster than the rate of natural food accumulation