316 research outputs found
Velocities from Cross-Correlation: A Guide for Self-Improvement
The measurement of Doppler velocity shifts in spectra is a ubiquitous theme
in astronomy, usually handled by computing the cross-correlation of the
signals, and finding the location of its maximum. This paper addresses the
problem of the determination of wavelength or velocity shifts among multiple
spectra of the same, or very similar, objects. We implement the classical
cross-correlation method and experiment with several simple models to determine
the location of the maximum of the cross-correlation function. We propose a new
technique, 'self-improvement', to refine the derived solutions by requiring
that the relative velocity for any given pair of spectra is consistent with all
others. By exploiting all available information, spectroscopic surveys
involving large numbers of similar objects may improve their precision
significantly. As an example, we simulate the analysis of a survey of G-type
stars with the SDSS instrumentation. Applying 'self-improvement' refines
relative radial velocities by more than 50% at low signal-to-noise ratio. The
concept is equally applicable to the problem of combining a series of
spectroscopic observations of the same object, each with a different Doppler
velocity or instrument-related offset, into a single spectrum with an enhanced
signal-to-noise ratio.Comment: 7 pages, 3 figures, uses emulateapj.cls; to appear in the
Astronomical Journal; see http://hebe.as.utexas.edu/stools/ to obtain the
companion softwar
Insight Into the Formation of the Milky Way Through Cold Halo Substructure. III. Statistical Chemical Tagging in the Smooth Halo
We find that the relative contribution of satellite galaxies accreted at high
redshift to the stellar population of the Milky Way's smooth halo increases
with distance, becoming observable relative to the classical smooth halo about
15 kpc from the Galactic center. In particular, we determine
line-of-sight-averaged [Fe/H] and [alpha/Fe] in the metal-poor main-sequence
turnoff (MPMSTO) population along every Sloan Extension for Galactic
Understanding and Exploration (SEGUE) spectroscopic line of sight. Restricting
our sample to those lines of sight along which we do not detect elements of
cold halo substructure (ECHOS), we compile the largest spectroscopic sample of
stars in the smooth component of the halo ever observed in situ beyond 10 kpc.
We find significant spatial autocorrelation in [Fe/H] in the MPMSTO population
in the distant half of our sample beyond about 15 kpc from the Galactic center.
Inside of 15 kpc however, we find no significant spatial autocorrelation in
[Fe/H]. At the same time, we perform SEGUE-like observations of N-body
simulations of Milky Way analog formation. While we find that halos formed
entirely by accreted satellite galaxies provide a poor match to our
observations of the halo within 15 kpc of the Galactic center, we do observe
spatial autocorrelation in [Fe/H] in the simulations at larger distances. This
observation is an example of statistical chemical tagging and indicates that
spatial autocorrelation in metallicity is a generic feature of stellar halos
formed from accreted satellite galaxies.Comment: 27 pages, 8 figures, and 7 tables in emulateapj format; accepted for
publication in ApJ. Full tables can be extracted from LaTeX sourc
An equatorial ultra iron-poor star identified in BOSS
We report the discovery of SDSS J131326.89-001941.4, an ultra iron-poor red
giant star ([Fe/H] ~ -4.3) with a very high carbon abundance ([C/Fe]~ +2.5).
This object is the fifth star in this rare class, and the combination of a
fairly low effective temperature (Teff ~ 5300 K), which enhances line
absorption, with its brightness (g=16.9), makes it possible to measure the
abundances of calcium, carbon and iron using a low-resolution spectrum from the
Sloan Digital Sky Survey. We examine the carbon and iron abundance ratios in
this star and other similar objects in the light of predicted yields from
metal-free massive stars, and conclude that they are consistent. By way of
comparison, stars with similarly low iron abundances but lower carbon-to-iron
ratios deviate from the theoretical predictions.Comment: 6 pages, 4 figures, accepted for publication in A&
Carbon-enhanced Metal-poor Stars in SDSS/SEGUE. I. Carbon Abundance Estimation and Frequency of CEMP Stars
We describe a method for the determination of stellar [C/Fe] abundance ratios
using low-resolution (R = 2000) stellar spectra from the SDSS and SEGUE. By
means of a star-by-star comparison with a set of SDSS/SEGUE spectra with
available estimates of [C/Fe] based on published high-resolution analyses, we
demonstrate that we can measure [C/Fe] from SDSS/SEGUE spectra with S/N > 15 to
a precision better than 0.35 dex. Using the measured carbon-to-iron abundance
ratios obtained by this technique, we derive the frequency of carbon-enhanced
stars ([C/Fe] > +0.7) as a function of [Fe/H], for both the SDSS/SEGUE stars
and other samples from the literature. We find that the differential frequency
slowly rises from almost zero to about 14% at [Fe/H] ~ -2.4, followed by a
sudden increase, by about a factor of three, to 39% from [Fe/H] ~ -2.4 to
[Fe/H] ~ -3.7. We also examine how the cumulative frequency of CEMP stars
varies across different luminosity classes. The giant sample exhibits a
cumulative CEMP frequency of 32% for [Fe/H] < -2.5, 31% for [Fe/H] < -3.0, and
33% for [Fe/H] < -3.5. For the main-sequence turnoff stars, we obtain a lower
cumulative CEMP frequency, around 10% for [Fe/H] < -2.5. The dwarf population
displays a large change in the cumulative frequency for CEMP stars below [Fe/H]
= -2.5, jumping from 15% for [Fe/H] < -2.5 to about 75% for [Fe/H] < -3.0. When
we impose a restriction with respect to distance from the Galactic mid-plane
(|Z| < 5 kpc), the frequency of the CEMP giants does not increase at low
metallicity ([Fe/H] < -2.5), but rather, decreases, due to the dilution of
C-rich material in stars that have undergone mixing with CNO-processed material
from their interiors. The frequency of CEMP stars near the main-sequence
turnoff, which are not expected to have experienced mixing, increases for
[Fe/H] < -3.0. [abridged]Comment: 19 pages, 10 figures, 6 tables, accepted for publication in AJ on
August 20, 201
Metallicity Gradients in the Milky Way Disk as Observed by the SEGUE Survey
The observed radial and vertical metallicity distribution of old stars in the
Milky Way disk provides a powerful constraint on the chemical enrichment and
dynamical history of the disk. We present the radial metallicity gradient,
\Delta[Fe/H]/\Delta R, as a function of height above the plane, |Z|, using 7010
main sequence turnoff stars observed by the Sloan Extension for Galactic
Understanding and Exploration (SEGUE) survey. The sample consists of mostly old
thin and thick disk stars, with a minimal contribution from the stellar halo,
in the region 6 < R < 16 kpc, 0.15 < |Z| < 1.5 kpc. The data reveal that the
radial metallicity gradient becomes flat at heights |Z| > 1 kpc. The median
metallicity at large |Z| is consistent with the metallicities seen in outer
disk open clusters, which exhibit a flat radial gradient at [Fe/H] ~ -0.5. We
note that the outer disk clusters are also located at large |Z|; because the
flat gradient extends to small R for our sample, there is some ambiguity in
whether the observed trends for clusters are due to a change in R or |Z|. We
therefore stress the importance of considering both the radial and vertical
directions when measuring spatial abundance trends in the disk. The flattening
of the gradient at high |Z| also has implications on thick disk formation
scenarios, which predict different metallicity patterns in the thick disk. A
flat gradient, such as we observe, is predicted by a turbulent disk at high
redshift, but may also be consistent with radial migration, as long as mixing
is strong. We test our analysis methods using a mock catalog based on the model
of Sch\"onrich & Binney, and we estimate our distance errors to be ~25%. We
also show that we can properly correct for selection biases by assigning
weights to our targets.Comment: Submitted to ApJ; 22 pages, 14 figures in emulateapj format; Full
resolution version available at
http://www.ucolick.org/~jyc/gradient/cheng_apj_fullres.pd
The Hercules-Aquila Cloud
We present evidence for a substantial overdensity of stars in the direction
of the constellations of Hercules and Aquila. The Cloud is centered at a
Galactic longitude of about 40 degrees and extends above and below the Galactic
plane by at least 50 degrees. Given its off-centeredness and height, it is
unlikely that the Hercules-Aquila Cloud is related to the bulge or thick disk.
More likely, this is a new structural component of the Galaxy that passes
through the disk. The Cloud stretches about 80 degrees in longitude. Its
heliocentric distance lies between 10 and 20 kpc so that the extent of the
Cloud in projection is roughly 20 kpc by 15 kpc. It has an absolute magnitude
of -13 and its stellar population appears to be comparable to, but somewhat
more metal-rich than, M92.Comment: ApJ (Letters), in pres
- …