Radar signal return from near-shore surface and shallow subsurface features, Darien Province, Panama

The AN/APQ-97 radar imagery over eastern Panama is analyzed. The imagery was directed toward extraction of geologic and engineering data and the establishment of operational parameters. Subsequent investigations emphasized landform identification and vegetation distribution. The parameters affecting the observed return signal strength from such features are considered. Near-shore ocean phenomena were analyzed. Tidal zone features such as mud flats and reefs were identified in the near range, but were not detectable in the far range. Surface roughness dictated the nature of reflected energy (specular or diffuse). In surf zones, changes in wave train orientation relative to look direction, the slope of the surface, and the physical character of the wave must be considered. It is concluded that the establishment of the areal extent of the tidal flats, distributary channels, and reefs is practical only in the near to intermediate range under minimal low tide conditions

Risk aversion and bidding theory

Theory of bidding behavior and formation of bidding model with risk aversio

Kinetics of the reaction of nitric oxide with hydrogen

Mixtures of NO and H2 diluted in argon or krypton were heated by incident shock waves, and the infrared emission from the fundamental vibration-rotation band of NO at 5.3 microns was used to monitor the time-varying NO concentration. The reaction kinetics were studied in the temperature range 2400-4500 K using a shock-tube technique. The decomposition of nitric oxide behind the shock was found to be modeled well by a fifteen-reaction system. A principle result of the study was the determination of the rate constant for the reaction H + NO yields N + OH, which may be the rate-limiting step for NO removal in some combustion systems. Experimental values of k sub 1 were obtained for each test through comparisons of measured and numerically predicted NO profiles

Evaluation of a wind-tunnel gust response technique including correlations with analytical and flight test results

A wind tunnel technique for obtaining gust frequency response functions for use in predicting the response of flexible aircraft to atmospheric turbulence is evaluated. The tunnel test results for a dynamically scaled cable supported aeroelastic model are compared with analytical and flight data. The wind tunnel technique, which employs oscillating vanes in the tunnel throat section to generate a sinusoidally varying flow field around the model, was evaluated by use of a 1/30 scale model of the B-52E airplane. Correlation between the wind tunnel results, flight test results, and analytical predictions for response in the short period and wing first elastic modes of motion are presented

Gravity from the extension of spatial diffeomorphisms

The possibility of the extension of spatial diffeomorphisms to a larger family of symmetries in a class of classical field theories is studied. The generator of the additional local symmetry contains a quadratic kinetic term and a potential term which can be a general (not necessarily local) functional of the metric. From the perspective of the foundation of Einstein's gravity our results are positive: The extended constraint algebra is either that of Einstein's gravity, or ultralocal gravity. If our goal is a simple modification of Einstein's gravity that for example makes it perturbatively renormalizable, as has recently been suggested, then our results show that there is no such theory within this class.Comment: 34 page

Inferring the three-dimensional distribution of dust in the Galaxy with a non-parametric method: Preparing for Gaia

We present a non-parametric model for inferring the three-dimensional (3D) distribution of dust density in the Milky Way. Our approach uses the extinction measured towards stars at different locations in the Galaxy at approximately known distances. Each extinction measurement is proportional to the integrated dust density along its line-of-sight. Making simple assumptions about the spatial correlation of the dust density, we can infer the most probable 3D distribution of dust across the entire observed region, including along sight lines which were not observed. This is possible because our model employs a Gaussian Process to connect all lines-of-sight. We demonstrate the capability of our model to capture detailed dust density variations using mock data as well as simulated data from the Gaia Universe Model Snapshot. We then apply our method to a sample of giant stars observed by APOGEE and Kepler to construct a 3D dust map over a small region of the Galaxy. Due to our smoothness constraint and its isotropy, we provide one of the first maps which does not show the "fingers of god" effect.Comment: Minor changes applied. Final version accepted for publication in A&A. 15 pages, 17 figure

Feasibility study of a 110 watt per kilogram lightweight solar array system

An investigation of the feasibility of a solar array panel subsystem which will produce 10,000 watts of electrical output at 1 A.U. with an overall beginning-of-life power-to-weight ratio of at least 110 watt/kg is reported. A description of the current baseline configuration which meets these requirements is presented. A parametric analysis of the single boom, two blanket planar solar array system was performed to arrive at the optimum system aspect ratio. A novel concept for the stiffening of a lightweight solar array by canting the solar cell blankets at a small angle to take advantage of the inherent in-plane stiffness to increase the symmetric out-of-plane frequency is introduced along with a preliminary analysis of the stiffening effect. A comparison of welded and soldered solar cell interconnections leads to the conclusion that welding is required on this ultralightweight solar array. The use of a boron/aluminum composite material in a BI-STEM type deployable boom is investigated as a possible advancement in the state-of-the-art

Spin filling of a quantum dot derived from excited-state spectroscopy

We study the spin filling of a semiconductor quantum dot using excited-state spectroscopy in a strong magnetic field. The field is oriented in the plane of the two-dimensional electron gas in which the dot is electrostatically defined. By combining the observation of Zeeman splitting with our knowledge of the absolute number of electrons, we are able to determine the ground state spin configuration for one to five electrons occupying the dot. For four electrons, we find a ground state spin configuration with total spin S=1, in agreement with Hund's first rule. The electron g-factor is observed to be independent of magnetic field and electron number.Comment: 11 pages, 7 figures, submitted to New Journal of Physics, focus issue on Solid State Quantum Informatio