849 research outputs found
Production of superconductor/carbon bicomponent fibers
Certain materials are unable to be drawn or spun into fiber form due to their improper melting characteristics or brittleness. However, fibrous samples of such materials are often necessary for the fabrication of intricate shapes and composites. In response to this problem, a unique process, referred to as the piggyback process, was developed to prepare fibrous samples of a variety of nonspinnable ceramics. In this technique, specially produced C-shaped carbon fibers serve as micromolds to hold the desired materials prior to sintering. Depending on the sintering atmosphere used, bicomponent or single component fibers result. While much has been demonstrated worldwide concerning the YBa2Cu3O(7-x) superconductor, fabrication into unique forms has proven quite difficult. However, a variety of intricate shapes are necessary for rapid commercialization of the superconducting materials. The potential for producing fibrous samples of the YBa2Cu3O(7-x) compound by the piggyback process is being investigated. Various organic and acrylic materials were investigated to determine suspending ability, reactivity with the YBa2Cu3O(7-x) compound during long term storage, and burn out characteristics. While many questions were answered with respect to the interfacial reactions between YBa2Cu3O(7-x) and carbon, much work is still necessary to improve the quality of the sintered material if the fibers produced are to be incorporated into useful composites or cables. Additional research is necessary to evaluate quality of the barrier layer during long soakings at the peak temperature; adjust the firing schedule to avoid microcracking and improve densification; and increase the solids loading in the superconductive suspension to decrease porosity
Oscillations in meta-generalized-gradient approximation potential energy surfaces for dispersion-bound complexes
© 2009 American Institute of Physics. The electronic version of this article is the complete one and can be found at: http://dx.doi.org/10.1063/1.3177061DOI: 10.1063/1.3177061Meta-generalized-gradient approximations (meta-GGAs) in density-functional theory are exchange-correlation functionals whose integrands depend on local density, density gradient, and also the kinetic-energy density. It has been pointed out by Johnson et al. [Chem. Phys. Lett. 394, 334 (2004) ] that meta-GGA potential energy curves in dispersion-bound complexes are susceptible to spurious oscillations unless very large integration grids are used. This grid sensitivity originates from the saddle-point region of the density near the intermonomer midpoint. Various dimensionless ratios involving the kinetic-energy density, found in typical meta-GGAs, may be ill-behaved in this region. Grid sensitivity thus arises if the midpoint region is sampled by too sparse a grid. For most meta-GGAs, standard grids do not suffice. Care must be taken to avoid this problem when using, or constructing, meta-GGAs
Development of superconducting YBa2Cu3O(x) wires with low resistance electrical contacts
Materials exhibiting superconductivity above liquid nitrogen temperatures (77 K) will enable new applications of this phenomena. One of the first commercial applications of this technology will be superconducting magnets for medical imaging. However, a large number of aerospace applications of the high temperature superconducting materials have also been identified. These include magnetic suspension and balance of models in wind tunnels and resistanceless leads to anemometers. The development of superconducting wires fabricated from the ceramic materials is critical for these applications. The progress in application of a patented fiber process developed by Clemson University for the fabrication of superconducting wires is reviewed. The effect of particle size and heat treatment on the quality of materials is discussed. Recent advances made at Christopher Newport College in the development of micro-ohm resistance electrical contacts which are capable of carrying the highest reported direct current to this material is presented
A Coherent Nonlinear Optical Signal Induced by Electron Correlations
The correlated behavior of electrons determines the structure and optical
properties of molecules, semiconductor and other systems. Valuable information
on these correlations is provided by measuring the response to femtosecond
laser pulses, which probe the very short time period during which the excited
particles remain correlated. The interpretation of four-wave-mixing techniques,
commonly used to study the energy levels and dynamics of many-electron systems,
is complicated by many competing effects and overlapping resonances. Here we
propose a coherent optical technique, specifically designed to provide a
background-free probe for electronic correlations in many-electron systems. The
proposed signal pulse is generated only when the electrons are correlated,
which gives rise to an extraordinary sensitivity. The peak pattern in
two-dimensional plots, obtained by displaying the signal vs. two frequencies
conjugated to two pulse delays, provides a direct visualization and specific
signatures of the many-electron wavefunctions.Comment: 2 figure
Isotopic distribution of fission fragments in collisions between 238U beam and 9Be and 12C targets at 24 MeV/u
Inverse kinematics coupled to a high-resolution spectrometer is used to
investigate the isotopic yields of fission fragments produced in reactions
between a 238U beam at 24 MeV/u and 9Be and 12C targets. Mass, atomic number
and isotopic distributions are reported for the two reactions. These
informations give access to the neutron excess and the isotopic distribution
widths, which together with the atomic-number and mass distributions are used
to investigate the fusion-fission dynamics.Comment: Submitted to PR
S17(0) Determined from the Coulomb Breakup of 83 MeV/nucleon 8B
A kinematically complete measurement was made of the Coulomb dissociation of
8B nuclei on a Pb target at 83 MeV/nucleon. The cross section was measured at
low relative energies in order to infer the astrophysical S factor for the
7Be(p,gamma)8B reaction. A first-order perturbation theory analysis of the
reaction dynamics including E1, E2, and M1 transitions was employed to extract
the E1 strength relevant to neutrino-producing reactions in the solar interior.
By fitting the measured cross section from Erel = 130 keV to 400 keV, we find
S17(0) = 17.8 (+1.4, -1.2) eV b
- …