The stellar host in star-forming low-mass galaxies: Evidence for two classes

The morphological evolution of star-forming galaxies provides important clues to understand their physical properties, as well as the triggering and quenching mechanisms of star formation. We aim at connecting morphology and star-formation properties of low-mass galaxies (median stellar mass $\sim$ 10$^{8.5}$ M$_{\odot}$) at low redshift ($z<0.36$). We use a sample of medium-band selected star-forming galaxies from the GOODS-North field. H$\alpha$ images for the sample are created combining both spectral energy distribution fits and HST data. Using them, we mask the star forming regions to obtain an unbiased two-dimensional model of the light distribution of the host galaxies. For this purpose we use $\texttt{PHI}$, a new Bayesian photometric decomposition code. We apply it independently to 7 HST bands assuming a S\'ersic surface brightness model. Star-forming galaxy hosts show low S\'ersic index (with median $n$ $\sim$ 0.9), as well as small sizes (median $R_e$ $\sim$ 1.6 kpc), and negligible change of the parameters with wavelength (except for the axis ratio, which grows with wavelength). Using a clustering algorithm, we find two different classes of star-forming galaxies: A more compact, redder, and high-$n$ (class A) and a more extended, bluer and lower-$n$ one (class B). We also find evidence that the first class is more spheroidal-like. In addition, we find that 48% of the analyzed galaxies present negative color gradients (only 5% are positive). The host component of low-mass star-forming galaxies at $z<0.36$ separates into two different classes, similar to what has been found for their higher mass counterparts. The results are consistent with an evolution from class B to class A. Several mechanisms from the literature, like minor and major mergers, and violent disk instability, can explain the physical process behind the likely transition between the classes. [abridged]Comment: Accepted for publication in Astronomy & Astrophysics. 13 pages, 11 figure

Paper Session II-B - Capabilities of the Mars Electrostatics Chamber at Kennedy Space Center

The Mars Electrostatics Chamber (MEC) in the Electromagnetic Physics Testbed Laboratory at NASA Kennedy Space Center, a cylindrical vacuum chamber with a volume of 1.5 m3, was designed to simulate limited Martian environmental conditions for electrostatics studies as well as for other areas of research. The MEC has been outfitted with an automated control system and a graphical user interface. The automation system consists of four subsystems: pressure control, temperature control, atmosphere control, and pneumatic control. The pressure and temperature control subsystems bring the chamber to 10 mbar and —90 C. The atmosphere control subsystem maintains a 100% carbon dioxide atmosphere at 10 mbar in the chamber. The pneumatic control system supplies compressed air to the pneumatic valves in the system. The MEC has a 1.43 m × 0.80 m experiment deck, a vacuum depressurization time of 20 min, controlled repressurization time of 10 minutes, and can be repressurized in an emergency in 10 min. The MEC can also be controlled manually to accommodate other environmental conditions. Experiments using the MEC are currently under way

Paper Session I-A - Dielectric Properties of Martian Soil Simulant

NASA’s Viking and Mars Pathfinder missions each used onboard instruments to determine the composition of the Martian soil at their respective landing sites. Those findings led to the development of a Martian soil simulant (JSC Mars-1) at NASA Johnson Space Center. However, in spite of the compositional studies conducted during those previous missions, no direct measurements were ever made of the dielectric properties of the Martian soil. Recently, instrumentation was developed at NASA Kennedy Space Center that enables investigations of the dielectric properties of granular materials to be conducted, including studies of Martian soil simulant. In the present study, a three-electrode system was used to measure the frequency response to an applied sinusoidal voltage of finely ground Martian soil simulant that was placed in a dry, low-vacuum environment. The data is shown to support a simple model of the granular system in which the resistances and capacitances of individual particles are connected in series by the resistance and capacitance of interparticle contacts

Degradation of Organics in a Glow Discharge Under Martian Conditions

The primary objective of this project is to understand the consequences of glow electrical discharges on the chemistry and biology of Mars. The possibility was raised some time ago that the absence of organic material and carbonaceous matter in the Martian soil samples studied by the VikinG Landers might be due in part to an intrinsic atmospheric mechanism such as glow discharge. The high probability for dust interactions during Martian dust storms and dust devils, combined with the cold, dry climate of Mars most likely results in airborne dust that is highly charged. Such high electrostatic potentials generated during dust storms on Earth are not permitted in the low-pressure CO2 environment on Mars; therefore electrostatic energy released in the form of glow discharges is a highly likely phenomenon. Since glow discharge methods are used for cleaning and sterilizing surfaces throughout industry, the idea that dust in the Martian atmosphere undergoes a cleaning action many times over geologic time scales appears to be a plausible one

Current State of the Electrodynamic Dust Shield for Mitigation

The Electrodynamic Dust Shield (EDS) has been developed as a means to lift, transport and remove dust from surfaces for over 18 years in the Electrostatics and Surface Physics Laboratory at NASA Kennedy Space Center. Resent advances in the technology have allowed large-scale EDSs to be fabricated using roll-to-roll techniques for quick efficient processing. The aim of the current research is to demonstrate the 3-dimensional (3-D) version of the EDS and its applicability to various surfaces of interest throughout the Artemis program that require dust mitigation. The conventional two dimensional (2-D) EDS has been comprised of interdigitated electrodes across a surface of alternating polarity to setup non-uniform electric fields in the location of interest for which the particles need to be removed. The 2-D system can be designed to accommodate various phases. For example, the two phase EDS is comprised of two electrodes 180 out of phase, while the 3-phase EDS is 120 out of phase with the adjacent leg. 4-phase EDS configurations are also possible but for each square wave a high voltage signal is applied to each leg

Electrostatic Characterization of Lunar Dust Simulants

Lunar dust can jeopardize exploration activities due to its ability to cling to most surfaces. In this paper, we report on our measurements of the electrostatic properties of the lunar soil simulants. Methods have been developed to measure the volume resistivity, dielectric constant, chargeability, and charge decay of lunar soil. While the first two parameters have been measured in the past [Olhoeft 1974], the last two have never been measured directly on the lunar regolith or on any of the Apollo samples. Measurements of the electrical properties of the lunar samples are being performed in an attempt to answer important problems that must be solved for the development of an effective dust mitigation technology, namely, how much charge can accumulate on the dust and how long does the charge remain on surfaces. The measurements will help develop coatings that are compatible with the intrinsic electrostatic properties of the lunar regolith

Electrostatic Properties of Polymers Subjected to Atmospheric Pressure Plasma Treatment; Correlation of Experimental Results with Atomistic Modeling

this study, PE, PTFE, PS and PMMA were exposed to a He+O2, APGD and pre and post treatment surface chemistries were analyzed by X-ray photoelectron spectroscopy and contact angle measurements. Semi-empirical and ab-initio calculations were performed to correlate the experimental results with sonic plausible molecular and electronic structure features of the oxidation process. For the PE and PS, significant surface oxidation showing C-O, C=O, and O-C=O bonding, and a decrease in the surface contact angles was observed. For the PTFE and PM MA, little change in the surface composition was observed. The molecular modeling calculations were performed on single and multiple oligomers and showed regardless of oxidation mechanism, e.g. -OH, =O or a combination thereof, experimentally observed levels of surface oxidation were unlikely to lead to a significant change in the electronic structure of PE and PS, and that the increased hydrophilic properties are the primary reason for the observed changes in its electrostatic behavior. Calculations for PTFE and PMMA argue strongly against significant oxidation of those materials, as confirmed by the XPS results

Patch Plate Materials Compatibility Assessment

Lunar dust proved to be a greater problem during the Apollo missions than was originally anticipated. The highly angular, charged dust particles stuck to seals, radiators, and visors; clogged mechanisms; and abraded space suits. As reported by Apollo 12 astronaut Pete Conrad "We must have had more than a hundred hours suited work with the same equipment, and the wear was not as bad on the training suits as it is on these flight suits in just the eight hours we were out.". Dust clinging to surfaces was also transport-ed into habitable spaces leading to lung and eye irritation of the astronauts. The Apollo astronauts were on the Lunar surface less than 24 hours and experienced many dust related problems. With the Artemis program, we are planning longer stays on the surface, with more activities that have the potential to put the astronauts and equipment in contact with greater quantities of Lunar dust. The success of these missions will depend on our understanding of material interactions with Lunar dust and the development of ways to mitigate dust effects in cases where exposure to dust will lead to failure of components, unacceptable loss of power or thermal control, unacceptable loss of visibility, or health issues. Through the Lunar Surface In-novation Initiative (LSII), we are initiating a Patch Plate Materials Compatibility Assessment project. The overall goal of the three year project is to develop passive approaches to mitigate Lunar dust adhesion to surfaces for technologies that are currently at TRL levels 2-3 to bring them to TRL level 5 through ground-based assessment, culminating in a demonstration flight experiment on a Commercial Lunar Payload Services (CLPS) lander in 2022-2023. This paper discusses the detailed technical objectives and approach for this project. References: Gaier, J.R. "The Effects of Lunar Dust on EVA Systems During the Apollo Missions," NASA/TM-2005-213610/REV1, (2005), Apollo 12 Technical Crew Debriefing, December 1, 1969, pp. 10-54

Use of Atmospheric Glow Discharge Plasma to Modify Spaceport Materials

Numerous materials used in spaceport operations require stringent evaluation before they can be utilized. It is critical for insulative polymeric materials that any surface charge be dissipated as rapidly as possible to avoid Electrostatic Discharges (ESD) that could present a danger. All materials must pass the Kennedy Space Center (KSC) standard electrostatic test [1]; however several materials that are considered favorable for Space Shuttle and International Space Station use have failed. Moreover, to minimize contamination of Mars spacecraft, spacecraft are assembled under cleanroom conditions and specific cleaning and sterilizing procedures are required for all materials. However, surface characteristics of these materials may allow microbes to survive by protecting them from sterilization and cleaning techniques. In this study, an Atmospheric Pressure Glow Discharge Plasma (APGD) [2] was used to modify the surface of several materials. This allowed the materials surface to be modified in terms of hydrophilicity, roughness, and conductivity without affecting the bulk properties. The objectives of this study were to alter the surface properties of polymers for improved electrostatic dissipation characteristics, and to determine whether the consequent surface modification on spaceport materials enhanced or diminished microbial survival

Paper Session II-C - Detection of Water in Martian Soil

The mineral composition of the Martian soil was previously characterized during NASA\u27s two Viking missions, and also on the Mars Pathfinder mission. The recent NASA MER missions will also contribute to our understanding of the composition of the Martian soil, and they will also look for evidence to indicate the presence of water in the soil at some time in the distant past. While the ongoing Mars Glob al Surveyor orbiter mission has provided (indirect) evidence for the presence of water on Mars, there have not been any direct measurements of water in the Martian soil by any lander mission. We will describe a possible method that may be used to directly detect water in the Martian soil. We will present data obtained using an instrument that we developed at NASA Kennedy Space Center to measure the dielectric properties of JSC Mars- I Martian soil simulant under dry and moist conditions, and show that this is a direct method that can be used to detect the presence of water in soil