Delay interferometric single-shot measurement of a petawatt-class laser longitudinal chromatism corrector

International audienceIn this paper we present a self-referenced interferometric single-shot measurement technique that we use to evaluate the longitudinal chromatism compensation made by a diffractive lens corrector. A diffractive lens with a delay of 1 ps is qualified for a 60 mm beam aperture. This corrector was implemented on the Alisé Nd:glass power chain. We qualify the corrector and the Alisé power chain chromatism, demonstrating the potential of this measuring principle as well as the interest of diffractive lenses to correct longitudinal chromatism of petawatt-class lasers

System Integration Issues of DC to DC converters in the sLHC Trackers

The upgrade of the trackers at the sLHC experiments requires implementing new powering schemes that will provide an increased power density with reduced losses and material budget. A scheme based on buck and switched capacitors DC to DC converters has been proposed as an optimal solution. The buck converter is based on a power ASIC, connected to a custom made air core inductor. The arrangement of the parts and the board layout of the power module are designed to minimize the emissions of EMI in a compact volume, enabling its integration on the tracker modules and staves

Hadron beam test of a scintillating fibre tracker system for elastic scattering and luminosity measurement in ATLAS

A scintillating fibre tracker is proposed to measure elastic proton scattering at very small angles in the ATLAS experiment at CERN. The tracker will be located in so-called Roman Pot units at a distance of 240 m on each side of the ATLAS interaction point. An initial validation of the design choices was achieved in a beam test at DESY in a relatively low energy electron beam and using slow off-the-shelf electronics. Here we report on the results from a second beam test experiment carried out at CERN, where new detector prototypes were tested in a high energy hadron beam, using the first version of the custom designed front-end electronics. The results show an adequate tracking performance under conditions which are similar to the situation at the LHC. In addition, the alignment method using so-called overlap detectors was studied and shown to have the expected precision.Comment: 12 pages, 8 figures. Submitted to Journal of Instrumentation (JINST

A double-sided, shield-less stave prototype for the ATLAS upgrade strip tracker for the high luminosity LHC

A detailed description of the integration structures for the barrel region of the silicon strips tracker of the ATLAS Phase-II upgrade for the upgrade of the Large Hadron Collider, the so-called High Luminosity LHC (HL-LHC), is presented. This paper focuses on one of the latest demonstrator prototypes recently assembled, with numerous unique features. It consists of a shortened, shield-less, and double sided stave, with two candidate power distributions implemented. Thermal and electrical performances of the prototype are presented, as well as a description of the assembly procedures and tools

A double-sided silicon micro-strip super-module for the ATLAS inner detector upgrade in the high-luminosity LHC

The ATLAS experiment is a general purpose detector aiming to fully exploit the discovery potential of the Large Hadron Collider (LHC) at CERN. It is foreseen that after several years of successful data-taking, the LHC physics programme will be extended in the so-called High-Luminosity LHC, where the instantaneous luminosity will be increased up to 5 × 1034 cm−2 s−1. For ATLAS, an upgrade scenario will imply the complete replacement of its internal tracker, as the existing detector will not provide the required performance due to the cumulated radiation damage and the increase in the detector occupancy. The current baseline layout for the new ATLAS tracker is an all-silicon-based detector, with pixel sensors in the inner layers and silicon micro-strip detectors at intermediate and outer radii. The super-module is an integration concept proposed for the strip region of the future ATLAS tracker, where double-sided stereo silicon micro-strip modules are assembled into a low-mass local support structure. An electrical super-module prototype for eight double-sided strip modules has been constructed. The aim is to exercise the multi-module readout chain and to investigate the noise performance of such a system. In this paper, the main components of the current super-module prototype are described and its electrical performance is presented in detail

Introduction: resilience and the Anthropocene: the stakes of ‘renaturalising’ politics

The Anthropocene marks a new geological epoch in which human activity (and specifically Western production and consumption practices) has become a geological force. It also profoundly destabilizes the grounds of Western political philosophy. Visions of a dynamic earth system wholly indifferent to human survival liquefy modernity’s division between nature and politics. Critical thought has only begun to scratch the surface of the Anthropocene’s re-naturalization of politics. This special issue of Resilience: International Policies, Practices and Discourses explores the politics of resilience within the wider cultural and political moment of the Anthropocene. It is within the field of resilience thinking that the implications of the Anthropocene for forms of governance are beginning to be sketched out and experimental practices are undertaken. Foregrounding the Anthropocene imaginary’s re-naturalization of politics enables us to consider the political possibilities of resilience from a different angle, one that is irreducible to neoliberal post-political rule

Campagne océanographique FLUPAC à bord du N.O. l'ATALANTE 23 septembre au 29 octobre 1994. Recueil des données. Tome 1 : météo, courantologie, hydrologie, données de surface

La campagne FLUPAC du N.O. L'Atalante, qui s'est déroulée du 23 septembre au 29 octobre 1994, s'est placée dans le cadre du programme international JGOFS (JOINT GLOBAL OCEAN FLUX STUDY). Elle a comporté deux radiales et deux stations équatoriales de 6-7 jours. La première radiale, le long de 165°E, a parcouru la zone comprise entre 20°S et 6°N. La seconde s'est déroulée le long de l'équateur entre 167°E et 150°W. Les deux stations de longue durée ont eu lieu à O°-167°E et 0°-150°W. Elles ont été l'occasion d'études détaillées des flux impliqués dans le cycle du carbone de la couche superficielle (0-500 m). Le premier tome du recueil de données présente des résultats, sous forme de graphiques et de tableaux, des paramètres enregistrés en continu et de ceux de la sonde CTD. Les paramètres chimiques, la chlorophylle "a" et les observations en cytomètrie de flux obtenus sur l'eau de la "rosette" couplée à la sonde CTD, sont également présentés. (Résumé d'auteur