18,761 research outputs found
Dissipative particle dynamics: the equilibrium for finite time steps
Dissipative particle dynamics (DPD) is a relatively new technique which has
proved successful in the simulation of complex fluids. We caution that for the
equilibrium achieved by the DPD simulation of a simple fluid the temperature
depends strongly on the time step. An analytic expression for the dependence is
obtained and shown to agree well with simulation results.Comment: 5 pages, LaTeX, 1 Postscript figure, submitted to Europhys.Letts.,
Algebraic corrections made to final resul
Influence of Storage of Wet Arabica Parchment Prior to Wet Hulling on Moulds Development, OchratoxinA Contamination, and Cup Quality of Mandheling Coffee
Mandheling coffee has been a well known specialty coffees for decades and the demand for this coffee is currently increasing. This coffee is characterised by low acidity, heavy-complex body, spicy-little earthy and fruity flavor. Mandheling coffee is produced by smallholder farmers in the highland surrounding Lake TobaNorth Sumatra in an unique way i.e. following de-pulping and 1–2 days sundrying, wet parchment is stored for varying periods up to a few weeks, the parchments are then de-hulled when still wet (40–45% moisture content) then the beans sundried. The handling procedure presumably contributes to the unique cup character of Mandheling coffee. On the other hand the storage of wet pachments may cause mould growth and mycotoxin contamination. This trial was designed to study the influence of storage of wet parchments prior to wet hulling on mould development, OTA contamination and cup Mandheling characteristic of the coffee product. The normal wet process, drying of parchment thoroughly to 12% moisture content was used as the control. Parchment coffees (6 lots) used for this trial were drawn from farmers and collectors in the region. The wet parchments (41.74–53.96% moisture content) were stored for 1 (D1), 7 (D7) and 14 (D14) days in PE sacks in a warehouse in the region. During the storage period, when there was visible mould growth, the parchments were spread on a plastic sheet inside the warehouse, as per common practice to suppress the mould growth. Following storage, the wet parchment was de-hulled and then sun-dried to a moisture content of 12% (MC12%) or dried to a moisture content of 17%, and held in storage for 3 weeks prior to final drying to 12% mc. The ‘normal wet process\u27 i.e. fresh-non stored parchments dried thoroughly to 12%, were used as the control. Parameters measured were visual evaluation, mould infestation, a w, moisture content (MC) on the stored parchment; while for dried beans mould infestation, OTA content and the Mandheling cup character evaluation (done by 4 panelists who were familiar to the coffee) were determined. Some mould species grew during the storage course, with black Aspergillus was the dominant species found in the beans, while A. ochraceusan OTA producer, was found in some samples with low infection rate (0–15.3%). Spreading of coffee inside the warehouse during the day could suppress moulds growth. OTA was found in only 5 samples out of 42 samples with range of 0.17–2.24 ppb, very less than European Union limit. There was no clear trend of storage period on the mould infection rates, OTA content, and the Mandheling cup characters. The high variability of the outcome was likely due to the inhomogenity of parchments used for this trial. The best Mandheling was found in the sample of D1-MC12%-coffee source of lot 1
HiRes deconvolution of Spitzer infrared images
Spitzer provides unprecedented sensitivity in the infrared (IR), but the spatial resolution is limited by a relatively small aperture (0.85 m) of the primary mirror. In order to maximize the scientific return it is desirable to use processing techniques which make the optimal use of the spatial information in the observations. We have developed a deconvolution technique for Spitzer images. The algorithm, "HiRes" and its implementation has been discussed by Backus et al. in 2005. Here we present examples of Spitzer IR images from the Infrared Array Camera (IRAC) and MIPS, reprocessed using this technique. Examples of HiRes processing include a variety of objects from point sources to complex extended regions. The examples include comparison of Spitzer deconvolved images with high-resolution Keck and Hubble Space Telescope images. HiRes deconvolution improves the visualization of spatial morphology by enhancing resolution (to sub-arcsecond levels in the IRAC bands) and removing the contaminating sidelobes from bright sources. The results thereby represent a significant improvement over previously-published Spitzer images. The benefits of HiRes include (a) sub-arcsec resolution (~0".6-0".8 for IRAC channels); (b) the ability to detect sources below the diffraction-limited confusion level; (c) the ability to separate blended sources, and thereby provide guidance to point-source extraction procedures; (d) an improved ability to show the spatial morphology of resolved sources. We suggest that it is a useful technique to identify features which are interesting enough for follow-up deeper analysis
Ichthyological Bulletin of the J.L.B. Smith Institute of Ichthyology; No. 48
The type-species of the cichlid fish genus Petrotilapia Trewavas 1935, P. tridentiger, is redescribed and two new species, P. genalutea and P. nigra, are described. These three species occur sympatrically at Monkey Bay. Morphological differences between the three species are slight and of little diagnostic value. Live coloration is the most important taxonomic character and can be used reliably to identify adults of the three species. Field observations of live fishes are shown to be of paramount importance in taxonomic studies of the genus Petrotilapia.Rhodes University Libraries (Digitisation
Sub-femtosecond electron bunches created by direct laser acceleration in a laser wakefield accelerator with ionization injection
In this work, we will show through three-dimensional particle-in-cell
simulations that direct laser acceleration in laser a wakefield accelerator can
generate sub-femtosecond electron bunches. Two simulations were done with two
laser pulse durations, such that the shortest laser pulse occupies only a
fraction of the first bubble, whereas the longer pulse fills the entire first
bubble. In the latter case, as the trapped electrons moved forward and
interacted with the high intensity region of the laser pulse, micro-bunching
occurred naturally, producing 0.5 fs electron bunches. This is not observed in
the short pulse simulation.Comment: AAC 201
Evidence that widespread star formation may be underway in G0.253+016, "The Brick"
Image cubes of differential column density as a function of dust temperature
are constructed for Galactic Centre molecular cloud G0.253+0.016 ("The Brick")
using the recently described PPMAP procedure. The input data consist of
continuum images from the Herschel Space Telescope in the wavelength range
70-500 m, supplemented by previously published interferometric data at 1.3
mm wavelength. While the bulk of the dust in the molecular cloud is consistent
with being heated externally by the local interstellar radiation field, our
image cube shows the presence, near one edge of the cloud, of a filamentary
structure whose temperature profile suggests internal heating. The structure
appears as a cool ( K) tadpole-like feature, pc in length, in
which is embedded a thin spine of much hotter ( 40-50 K) material. We
interpret these findings in terms of a cool filament whose hot central region
is undergoing gravitational collapse and fragmentation to form a line of
protostars. If confirmed, this would represent the first evidence of widespread
star formation having started within this cloud.Comment: 5 pages, 4 figures; accepted for publication in MNRAS Letter
New urea-absorbing polymers for artificial kidney machines
Etherified polymer is made from modified cellulose derivative which is reacted with periodate. It will absorb 2 grams of urea per 100 grams of polymer. Indications are that polymers could be used to help remove uremic wastes in artificial kidneys, or they could be administered orally as therapy for uremia
Aldehyde-containing urea-absorbing polysaccharides
A novel aldehyde containing polymer (ACP) is prepared by reaction of a polysaccharide with periodate to introduce aldehyde groups onto the C2 - C3 carbon atoms. By introduction of ether and ester groups onto the pendant primary hydroxyl solubility characteristics are modified. The ACP is utilized to absorb nitrogen bases such as urea in vitro or in vivo
Orbital periods of the binary sdB stars PG0940+068 and PG1247+554
We have used the radial velocity variations of two sdB stars previously
reported to be binaries to establish their orbital periods. They are
PG0940+068, (P=8.33d) and PG1247+554 (P=0.599d). The minimum masses of the
unseen companions, assuming a mass of 0.5 solar masses for the sdB stars, are
0.090 +/- 0.003 solar masses for PG1247+554 and 0.63 +/- 0.02 solar masses for
PG0940+068. The nature of the companions is not constrained further by our
data.Comment: 5 pages, 2 figure
- …