Design of a smart turning tool with application to in-process cutting force measurement in ultraprecision and micro cutting

In modern micromachining, there is a need to measure and monitor certain machining process parameters in process so as to detect tool wear in real time, to optimize the process parameters setup, and to render the machining process some level of smartness and intelligence. This paper presents the innovative design of a smart turning tool using two pieces of piezoelectric films to measure cutting and feed force in real time. The tool was tested on its performance through the calibration and cutting trials against the commercial dynamometer. The results show the smart turning tool has achieved the performance as designed

Long-term X-ray emission from Swift J1644+57

The X-ray emission from Swift J1644+57 is not steadily decreasing instead it shows multiple pulses with declining amplitudes. We model the pulses as reverse shocks from collisions between the late ejected shells and the externally shocked material, which is decelerated while sweeping the ambient medium. The peak of each pulse is taken as the maximum emission of each reverse shock. With a proper set of parameters, the envelope of peaks in the light curve as well as the spectrum can be modelled nicely.Comment: 6 pages, 2 figures, accepted for publication in MNRA

Laboratory requirements for in-situ and remote sensing of suspended material

Recommendations for laboratory and in-situ measurements required for remote sensing of suspended material are presented. This study investigates the properties of the suspended materials, factors influencing the upwelling radiance, and the various types of remote sensing techniques. Calibration and correlation procedures are given to obtain the accuracy necessary to quantify the suspended materials by remote sensing. In addition, the report presents a survey of the national need for sediment data, the agencies that deal with and require the data of suspended sediment, and a summary of some recent findings of sediment measurements

Possibly New Charmed Baryon States from Bˉ0→ppˉD0\bar B^0\to p\bar p D^{0} Decay

We examine the invariant mass spectrum of $D^{0}p$ in $\bar B^0\to p\bar p D^{0}$ decay measured by BABAR and find that through the 2-step processes of $\bar B^0\to {\bf B_c^+}(\to D^{0} p)\bar p$, where ${\bf B_c}$ denotes a charmed baryon state, some of the peaks can be identified with the established $\Sigma_c(2800)^+$, $\Lambda_c(2880)^+$ and $\Lambda_c(2940)^+$. Moreover, in order to account for the measured spectrum, it is necessary to introduce a new charmed baryon resonance with $(m,\,\Gamma)=(3212\pm 20,\,167\pm 34)$ MeV.Comment: 8 pages, 1 figure, title changed and discussions updated, version accepted for publication in Phys. Rev.

Design and finite element mode analysis of noncircular gear

The noncircular gear transmission is an important branch of the gear transmission, it is characterized by its compact structure, good dynamic equilibration and other advantages, and can be used in the automobile, engineering machine, ship, machine tool, aviation and spaceflight field etc. Studying on the dynamics feature of noncircular gear transmission can improve the ability to carry loads of, reduce the vibration and noise of, increase the life of the noncircular gear transmission machine, provides guidance for the design of the noncircular gear, and has significant theories and practical meanings. In this paper, the gear transmission technique is used to studied the design method of the noncircular gear, which contains distribution of teeth on the pitch curve, designs of the tooth tip curve and the tooth root curve, design of the tooth profile curve, the gear system dynamics principle is introduced to establish dynamics model for the noncircular gear; basic theory of finite element and mode analysis method are applied, finite element model for the noncircular gear is established, natural vibration characteristic of the noncircular gear is studied. And the oval gear is taken as an example, the mathematics software MathCAD, the 3D modeling software UG and the finite element software ABAQUS are used to realize precise 3D model of the oval gear. The finite element method is used, the natural vibration characteristic of the oval gear is studied, the main vibration types and natural frequencies of the oval gear and that of the equivalent cylindrical gears are analyzed and compared, the conclusions received reflect the dynamics performance of the oval gear, and solid foundation is laid for dynamics research and engineering application of the oval gear transmission

A Morphological Approach to the Pulsed Emission from Soft Gamma Repeaters

We present a geometrical methodology to interpret the periodical light curves of Soft Gamma Repeaters based on the magnetar model and the numerical arithmetic of the three-dimensional magnetosphere model for the young pulsars. The hot plasma released by the star quake is trapped in the magnetosphere and photons are emitted tangent to the local magnetic field lines. The variety of radiation morphologies in the burst tails and the persistent stages could be well explained by the trapped fireballs on different sites inside the closed field lines. Furthermore, our numerical results suggests that the pulse profile evolution of SGR 1806-20 during the 27 December 2004 giant flare is due to a lateral drift of the emitting region in the magnetosphere.Comment: 7 figures, accepted by Ap