996 research outputs found
Numerical and Experimental Analysis of the Pressure Signature for different High-Speed Trains
This paper describes a procedure for the validation of numerical codes able to reproduce the pressures in tunnel due to the passage of trains. In the first step, the parameters of the numerical code are set by matching the train-tunnel pressure signature measured during a single-passage of different types of train within the tunnel and in the second step, without changing the parameters, the crossing of two trains is simulated.
Within the paper, the methodology is applied to the numerical mono-dimensional code DB-Tunnel while the experimental data are those collected during an experimental research programme carried out in the tunnel La Fornace, on the Italian high-speed railway from Roma to Firenze. The accuracy of the numerical code estimation is evaluated in terms of the maximum pressure generated in the tunnel by the train passing/crossing because this is the key parameter, according to the TSI standard for railway infrastructures
Simplified estimation of the train resistance parameters: full scale experimental tests and analysis
A CEN standard (EN 14067-4, 2005) describes the methodologies for the
assessment of the running resistance of railway vehicles starting from full-scale test
measurements. According to this standard, the speed dependent terms of the
equation of Davis [1] have to be determined by means of coasting tests. In this
paper, a new method to estimate the running resistance coefficients from a full-scale
coasting test is proposed and compared with the two methods proposed in the CEN
standard (the regression method and the speed history identification method). The
main advantage of this new method is that it does not require the railway line
characteristics to be known and it will be shown that the new method is able to
evaluate the coefficients with an accuracy equivalent to that of the other methods
considered
Controlled Lactonization of o-Coumaric Esters Mediated by Supramolecular Gels
Fragrances are volatile organic compounds widely used in our daily life. Unfortunately, the high volatility required to reach human receptors reduces their persistency in the air. To contrast this effect, several strategies may be used. Among them, we present here the combination of two techniques: the microencapsulation in supramolecular gels and the use of profragrances. We report a study on the controlled lactonization of four esters derived from o-coumaric acid. The ester lactonization spontaneously occurs after exposure to solar light, releasing coumarin and the corresponding alcohol. To determine the rate of fragrance release, we compared the reaction in solution and in a supramolecular gel and we demonstrated that the lactonization reaction always occurs slower in the gel. We also studied the more suitable gel for this aim, by comparing the properties of two supramolecular gels obtained with the gelator Boc-L-DOPA(Bn)(2)-OH in a 1:1 ethanol/water mixture in different gelator concentration (0.2% and 1% w/v). The gel prepared with 1% w/v gelator concentration is stronger and less transparent than the other and was used for the profragrances encapsulation. In any case, we obtained a significative reduction of lactonization reaction in gel, compared with the same reaction in solution
Evaluation of the Aerodynamic Effect of a Smooth Rounded Roof on Crosswind Stability of a Train by Wind Tunnel Tests
The advent of high-speed trains led to new issues and constraints for railway network manufacturers and operators. This is the case of crosswind effect, that occurs when train is running in strong wind conditions. The combination of train speed and wind speed generates a relative flow that affects the train stability. Wind tunnel tests on still railway vehicles (relative wind-train velocity in coincidence with absolute wind velocity) are mandatory according to Technical Specification for Interoperability (TSI) to ensure high-speed train safety. However, issues related to the correct evaluation of the full-scale aerodynamic behaviour of the trains can arise. In the present work, aerodynamic force and pressure coefficients measured in wind tunnel tests on a scaled model of ETR1000 high-speed train on single track ballast and rails are presented. The tests were performed in the GVPM wind tunnel of Politecnico di Milano. Results show that different flow behaviours can occur at high yaw angles when the train behaves like a bluff body depending on wind speed used during the test
Boc-Protection on L-DOPA: an Easy Way to Promote Underwater Adhesion
The ability of mussels to adhere to underwater surfaces has attracted a lot of attention from the scientific community. As proteins containing L-DOPA (3,4-dihydroxyphenyl-l-alanine) are involved in their adhesion, a common strategy to synthesize adhesives is the incorporation of this amino acid into other compounds. Herein, we report a study on four compounds of the family of Bocx-(L-DOPA)n-OMe (x = 1–3; n = 1,2), that we prepared through simple synthetic steps. Three of them showed the capability of underwater adhesion: while they are not adhesive in the dry phase, the adhesiveness is triggered when the dried sample is immersed in water or any aqueous solutions. The introduction of protecting groups stabilizes L-DOPA, preventing the oxidation of the catechol moiety, and enhances the hydrophobicity, helping the removal of water from the surface to bind. These molecules show good adhesiveness, with different properties, so they may be all used as adhesives for different purposes. These outcomes pave the way for new applications for these materials as green and biocompatible adhesives
Ballast flight under high-speed trains: Wind tunnel full-scale experimental tests
The flying ballast phenomenon has become an important problem, in the last years, because of the development of high speed trains and the consequent increase of the speed up to 350. km/h. The problem is very complex since it is related to both railway infrastructure and train characteristics and since it involves mechanical and aerodynamic effects. The results of an experimental study carried out on the Italian high-speed railway and on a 1:1 real stretch of the railways in wind tunnel are presented in the paper. The study was aimed to analyze the effects of the height of the ballast level, the stone shape in the upper layer of the ballast and the compaction of the ballast bed on the problem. To this purpose a specific wind tunnel test rig was designed to reproduce in the wind tunnel a flow with the same average characteristics of the one measured on the real line, especially in the region close to the ballast and sleepers. Finally, starting from the results of these tests, possible countermeasures to ballast lifting on-set are proposed
Full-scale experimental study on the new Italian high-speed train aerodynamics: on board and trackside measurements
Aerodynamic loads in open air of high speed trains: Analysis of experimental data
The homologation of high-speed trains is a demanding and expensive procedure. In
particular, the evaluation of train slipstream according to the standard TSI, 2008 is
divided in two different test programmes: one concerning the workers at the
trackside and the other studying the passengers standing on the platform. This paper
presents some slipstream measurements performed on three high speed trains and a
comparison between them. The objective is to investigate the slipstream on the
platform and relate it to the flow measured at the trackside at the same height with
respect to the top of the rail. This topic is currently under revision by the
commission in charge of the TSI standard. Interesting evidence concerning the
improvements of the aerodynamic performance of new-generation trains are
highlighted
In-peptide synthesis of di-oxazolidinone and dehydroamino acid-oxazolidinone motifs as \u3b2-turn inducers
Small and easy-to-do mimetics of \u3b2-turns are of great interest to interfere with protein-protein recognition events mediated by \u3b2-turn recognition motifs. We propose a straightforward procedure for constraining the conformation of tetrapeptides lacking a pre-formed scaffold. According to the stereochemistry array, N-Ts tetrapeptides including Thr or PhSer (phenylserine) at the positions 2 or 3 gave rise in a single step to the sequences Oxd 2-Oxd3 or \u394Abu2-Oxd3 (Oxd, oxazolidin-2-one; \u394Abu, 2,3-dehydro-2-aminobutyric). These pseudo-Pro residues displayed highly constrained, and \u3c7 dihedral angles, and induced clear \u3b2-turns or inverse turns of type I or II, as determined by extensive spectroscopic and computational analyses. \ua9 The Royal Society of Chemistry 2013
- …