Inverse Estimation of Temperature Profiles in Landfills Using Heat Recovery Fluids Measurements

In addition to leachate and gas emission analysis, temperature variations in municipal solid waste landfills are routinely monitored for safety and health reasons, such as the increased production of biogas or the danger of spontaneous combustion phenomena if the temperature exceeds 70–75°C. The increasing constraints on greenhouse gas emissions and the convenience of fuel and heat recovery have helped develop a global approach to landfills' operation and maintenance, generally referred to as bioreactor landfill management. The heat recovery piping we are presently designing can be a significant part of this approach. The heat gained by a fluid circulated in a closed network through the landfill is transferred to an external heat exchanger or used directly as warm water. Additionally, it can help reduce landfill temperature levels and control biogas generation. Since the pipes diameter is large enough to allow for a radial temperature gradient, this information can be used for an inverse estimation of the temperature profile in the landfill which constitutes the boundary conditions of the resulting heat transfer problem. In this paper, we describe an algorithm for regularising the resulting ill-posed free boundary estimation problem using sampled data of the heat recovery fluid on exiting the landfill

Use of the microalga Scenedesmus obliquus to remove cadmium cations from aqueous solutions

The ability of a wild strain of Scenedesmus obliquus, isolated from a heavy metal-contaminated environment, to remove Cd2+ from aqueous solutions was studied at several initial concentrations. Viable biomass removed metal to a maximum extent of 11.4 mgCd/g at 1 mgCd/l, with most Cd2+ being adsorbed onto the cell surface. A commercially available strain (ACOI 598) of the same microalga species was also exposed to the same Cd concentrations, and similar results were obtained for the maximum extent of metal removal. Heat-inactivated cells removed a maximum of 6.04 mgCd/g at 0.5 mgCd/l. The highest extent of metal removal, analyzed at various pH values, was 0.09 mgCd/g at pH 7.0. Both strains of the microalga tested have proven effective in removing a toxic heavy metal from aqueous solutions, hence supporting their choice for bioremediation strategies of industrial effluents.info:eu-repo/semantics/acceptedVersio

Influence of the hydration degree on copper removal by Spirulina platensis biomass

In the present work, hydrated biomass of Spirulina platensis has been used for copper removal from aqueous solution

Electrochemical remediation of copper(II) from an industrial effluent. Part II: three-dimensional foam electrodes

A batch recycle removal of copper ions from an industrial effluent by means of copper foam cathodes was tested. A constant current of 750 A was applied to the cell in order to perform the reduction. Copper depletion was investigated at different solution flow rates and a removal greater than 98% was obtained with a flow rate of 1000 l:h. The influence of initial metal concentration on copper deposition and current efficiency is also discusse