3,079 research outputs found
A wideband CPW ring power combiner with low insertion loss and high port isolation
In this paper we present a coplanar waveguide (CPW)-based ring power combiner that exhibits less than 0.8 dB insertion loss, better than 15 dB port match and higher than 22 dB isolation loss over the frequency range from 50 GHz to 100 GHz. Compared with the conventional 2-way Wilkinson combiner, the proposed ring power combiner replaces the resistor between the two input ports with two quasi quarter-wave CPWs, a 180Âş CPW phase inverter, and two resistors that lead to frequency-insensitive port isolation and wideband port match. The power combiner is realized using an electron beam-based GaAs MMIC process along with simple electron beam airbridge technology. These results agree well with 3D full-wave simulations
Strain-induced energy band gap opening in two-dimensional bilayered silicon film
This work presents a theoretical study of the structural and electronic
properties of bilayered silicon films under in-plane biaxial strain/stress
using density functional theory. Atomic structures of the two-dimensional
silicon films are optimized by using both the local-density approximation and
generalized gradient approximation. In the absence of strain/stress, five
buckled hexagonal honeycomb structures of the bilayered silicon film have been
obtained as local energy minima and their structural stability has been
verified. These structures present a Dirac-cone shaped energy band diagram with
zero energy band gaps. Applying tensile biaxial strain leads to a reduction of
the buckling height. Atomically flat structures with zero bucking height have
been observed when the AA-stacking structures are under a critical biaxial
strain. Increase of the strain between 10.7% ~ 15.4% results in a band-gap
opening with a maximum energy band gap opening of ~168.0 meV obtained when
14.3% strain is applied. Energy band diagram, electron transmission efficiency,
and the charge transport property are calculated.Comment: 18 pages, 5 figures, 1 tabl
Spin-phonon coupling in single Mn doped CdTe quantum dot
The spin dynamics of a single Mn atom in a laser driven CdTe quantum dot is
addressed theoretically. Recent experimental
results\cite{Le-Gall_PRL_2009,Goryca_PRL_2009,Le-Gall_PRB_2010}show that it is
possible to induce Mn spin polarization by means of circularly polarized
optical pumping. Pumping is made possible by the faster Mn spin relaxation in
the presence of the exciton. Here we discuss different Mn spin relaxation
mechanisms. First, Mn-phonon coupling, which is enhanced in the presence of the
exciton. Second, phonon-induced hole spin relaxation combined with carrier-Mn
spin flip coupling and photon emission results in Mn spin relaxation. We model
the Mn spin dynamics under the influence of a pumping laser that injects
excitons into the dot, taking into account exciton-Mn exchange and phonon
induced spin relaxation of both Mn and holes. Our simulations account for the
optically induced Mn spin pumping.Comment: 17 pages, 11 figures, submitted to PR
Poly(amido amine)s as Gene Delivery Vectors: Effects of Quaternary Nicotinamide Moieties in the Side Chains
To evaluate the effect of quaternary nicotinamide pendant groups on gene delivery properties, a series of poly(amido amine) (co)polymers were synthesized by Michael addition polymerization of N, N-cystaminebisacrylamide with variable ratios of 1-(4-aminobutyl)-3-carbamoylpyridinium (Nic-BuNH2), and tert-butyl-4-aminobutyl carbamate (BocNH-BuNH2), yielding poly(amido amine)s (NicX-NHBoc) with X=0, 10, 30, and 50 % of quaternary nicotinamide groups in the polymer side chains. Deprotection of the pendant Boc-NH groups afforded an analogous series of polymers (NicX-NH2) with higher charge density (due to the presence of protonated primary amino groups in the side chains) and subsequent acetylation yielded a series of polymers (NicX-NHAc) of lower hydrophobicity than the Boc-protected polymers. The polymers with the Boc-protected or the acetylated amino groups showed high buffer capacity in the range pH 5.1-7.4, which is a property that can contribute to endosomal escape of polyplexes. The presence of quaternary nicotinamide groups has distinct beneficial effects on the gene vector properties of these polymers. The polymers containing 30 % of quaternary nicotinamide groups in their side chains condense DNA into small, nanosized particles (200 nm) with positive surface charge (+15 mV). Fluorescence experiments using ethidium bromide as a competitor showed that the quaternary nicotinamide groups intercalate with DNA, contributing to a more intimate polymer-DNA binding and shielding. Polyplexes of nicotinamide-functionalized poly(amido amine)s NicX-NHBoc and NicX-NHAc, formed at 12/1 polymerDNA mass ratio, efficiently transfect COS-7 cells with efficacies up to four times higher than that of PEI (Exgen 500), and with essentially absence of cytotoxicity. NicX-NH2 polymers, possessing protonated primary amino groups in their side chains, have a higher cytotoxicity profile under these conditions, but at lower 3/1 polymer-DNA mass ratio also these polymers are capable of efficient transfection, while retaining full cell viability
Electron spin resonance on a 2-dimensional electron gas in a single AlAs quantum well
Direct electron spin resonance (ESR) on a high mobility two dimensional
electron gas in a single AlAs quantum well reveals an electronic -factor of
1.991 at 9.35 GHz and 1.989 at 34 GHz with a minimum linewidth of 7 Gauss. The
ESR amplitude and its temperature dependence suggest that the signal originates
from the effective magnetic field caused by the spin orbit-interaction and a
modulation of the electron wavevector caused by the microwave electric field.
This contrasts markedly to conventional ESR that detects through the microwave
magnetic field.Comment: 4 pages, 4 figure
Low power signal detection in emerging transferred electron devices using vector network analyser above 100 GHz
A Sustainable Facility Management Outsourcing Relationships System: Artificial Neural Networks
The Contingency Outsourcing Relationship (CORE) model originated from the Four Outsourcing Relationship Types (FORT) model; the CORE model is used in the globalized Facility Management (FM) industry, while the FORT model is originally used in the global information technology industry. The purpose of this paper is to thoroughly analyse the simulated case studies of the four different categories (i.e., in-house, technical expertise, commitment and common goals) of the CORE model from the perspective of the various clients. This study builds on the previous work on the outsourcing relationships between a client and a globalized FM service provider. It further explores the application of this model with the aid of artificial neural networks (ANNs) towards a sustainable future. A quantitative methodology through a survey is used to analyse eight outsourcing strategies for the four outsourcing relationships. A set of revised rules of the CORE is introduced and discussed regarding the approaches to investigate the four simulated outsourcing relationship systems. The study further reveals that an interesting understanding of the four outsourcing categories can be systematically and efficiently implemented into the FM outsourcing relationships through the methodology of scientific Artificial Intelligence (AI). It is concluded that FM outsourcing categorization may help to define the appropriate relationships. This further detailed outcome generated from the ANN can be clearly considered a strong and solid reference to define and explain the existing outsourcing relationships between the stakeholders and the service providers with the aim to assign an outsourcing category to the FM relationship between the client and service provider based on the learnt rules
Properties of Two-Dimensional Silicon grown on Graphene Substrate
The structure and electrical properties of a two-dimensional (2D) sheet of
silicon on a graphene substrate are studied using first-principles
calculations. A new corrugated rectangular structure of silicon is proposed to
be the most energetically favorable structure. The shifting of the Fermi energy
level indicates self-doping. Calculation of electron density shows a weak
coupling between the silicon layer and graphene substrate. The 2D silicon sheet
turns to be metallic and has a much higher value of transmission efficiency
(TE) than the underlying graphene substrate.Comment: 5 Pages, 7 figure
- …