Development of EHD Ion-Drag Micropump for Microscale Electronics Cooling Systems

In this investigation, the numerical simulation of electrohydrodynamic (EHD) ion-drag micropumps with micropillar electrode geometries have been performed. The effect of micropillar height and electrode spacing on the performance of the micropumps was investigated. The performance of the EHD micropump improved with increased applied voltage and decreased electrode spacing. The optimum micropillar height for the micropump with electrode spacing of 40$\mu$m and channel height of 100$\mu$m at 200V was 40$\mu$m, where a maximum mass flow rate of 0.18g/min was predicted. Compared to that of planar electrodes, the 3D micropillar electrode geometry enhanced the overall performance of the EHD micropumps.Comment: Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions

Thermal coatings for titanium-aluminum alloys

Titanium aluminides and titanium alloys are candidate materials for use in hot structure and heat-shield components of hypersonic vehicles because of their good strength-to-weight characteristics at elevated temperature. However, in order to utilize their maximum temperature capability, they must be coated to resist oxidation and to have a high total remittance. Also, surface catalysis for recombination of dissociated species in the aerodynamic boundary layer must be minimized. Very thin chemical vapor deposition (CVD) coatings are attractive candidates for this application because of durability and very light weight. To demonstrate this concept, coatings of boron-silicon and aluminum-boron-silicon compositions were applied to the titanium-aluminides alpha2 (Ti-14Al-21Nb), super-alpha2 (Ti-14Al-23-Nb-2V), and gamma (Ti-33Al-6Nb-1Ta) and to the titanium alloy beta-21S (Ti-15Mo-3Al-3Nb-0.2Si). Coated specimens of each alloy were subjected to a set of simulated hypersonic vehicle environmental tests to determine their properties of oxidation resistance, surface catalysis, radiative emittance, and thermal shock resistance. Surface catalysis results should be viewed as relative performance only of the several coating-alloy combinations tested under the specific environmental conditions of the LaRC Hypersonic Materials Environmental Test System (HYMETS) arc-plasma-heated hypersonic wind tunnel. Tests were also conducted to evaluate the hydrogen transport properties of the coatings and any effects of the coating processing itself on fatigue life of the base alloys. Results are presented for three types of coatings, which are as follows: (1) a single layer boron silicon coating, (2) a single layer aluminum-boron-silicon coating, and (3) a multilayer coating consisting of an aluminum-boron-silicon sublayer with a boron-silicon outer layer

Diode laser 87Rb optical pumping in an evacuated wall-coated cell

The evacuated wall coated sealed cell coupled with diode laser optical pumping offers a number of attractive potential advantages for use in Rb or Cs atomic frequency standards. An investigation of systematic effects is required to explore possible limitations of the technique. The use of diode laser optical pumping of 87 Rb in an evacuated wall coated sealed cell is presented. Experimental results/discussion to be presented include the signal strength and line broadening of the 0 - 0 hyperfine resonance as a function of light intensity for the D1 optical transitions (F - F prime) - (2 1 prime) and (2 - 2 prime), shift of the 0 - 0 hyperfine frequency as a function of laser intensity and de-tuning from optical resonance, and diode laser frequency stabilization techniques

Review of current interest and research in water hyacinth-based wastewater treatment

The status of activity in the user community for water hyacinth-based wastewater treatment was evaluated. The principal technique used was that of interviewing people who either (1) were known to be engaged in hyacinth research or development or (2) had made inquiry to NASA about hyacinth systems. About 40 non-research organizations and a similar number of research organizations were contacted. As a result of the interviews and a review of the relevant literature, it was concluded that hyacinth systems have the potential for providing a lower cost way for small cities to meet increasingly stringent effluent requirements. A limited amount of full-scale demonstration of hyacinth systems has been carried out during the past two years, but the yield of design data has been small. Several organizations are currently planning construction of experimental full-scale hyacinth-based wastewater treatment systems during 1977-1978

Evaluation of the SPAR thermal analyzer on the CYBER-203 computer

The use of the CYBER 203 vector computer for thermal analysis is investigated. Strengths of the CYBER 203 include the ability to perform, in vector mode using a 64 bit word, 50 million floating point operations per second (MFLOPS) for addition and subtraction, 25 MFLOPS for multiplication and 12.5 MFLOPS for division. The speed of scalar operation is comparable to that of a CDC 7600 and is some 2 to 3 times faster than Langley's CYBER 175s. The CYBER 203 has 1,048,576 64-bit words of real memory with an 80 nanosecond (nsec) access time. Memory is bit addressable and provides single error correction, double error detection (SECDED) capability. The virtual memory capability handles data in either 512 or 65,536 word pages. The machine has 256 registers with a 40 nsec access time. The weaknesses of the CYBER 203 include the amount of vector operation overhead and some data storage limitations. In vector operations there is a considerable amount of time before a single result is produced so that vector calculation speed is slower than scalar operation for short vectors

A 128K-bit CCD buffer memory system

A prototype system was implemented to demonstrate that CCD's can be applied advantageously to the problem of low power digital storage and particularly to the problem of interfacing widely varying data rates. 8K-bit CCD shift register memories were used to construct a feasibility model 128K-bit buffer memory system. Peak power dissipation during a data transfer is less than 7 W., while idle power is approximately 5.4 W. The system features automatic data input synchronization with the recirculating CCD memory block start address. Descriptions are provided of both the buffer memory system and a custom tester that was used to exercise the memory. The testing procedures and testing results are discussed. Suggestions are provided for further development with regards to the utilization of advanced versions of CCD memory devices to both simplified and expanded memory system applications

Public Perceptions of the Midwest’s Pavements: Policies and Thresholds

A 5-year, pooled fund study with the Iowa, Minnesota, and Wisconsin departments of transportation assessed the public\u27s perceptions of pavement improvement strategies and developed thresholds of satisfaction using the departments\u27 physical indices, such as pavement ride and condition on rural, two-lane highways in the states. Approximately 3,600 drivers in the three states were involved in the three phases of the project, which included 18 focus groups, 400 statewide surveys in each state, and 2,300 targeted surveys across the three states. A multidisciplinary team from Marquette University and a mass media survey lab conducted the studies. A summary of focus group methods and purposes and a three-state summary of policy and improvement issues are provided. More than 450 highway segments were surveyed in Phase III, with input from 2,300 drivers through a two-step recruitment and postdrive interview. Thresholds of International Roughness Index and condition indices are summarized for the three states. The study found a high degree of trust in the three departments of transportation and public support for building longer-lasting pavements and minimizing delay. A three-step methodology is recommended for other state studies. Physical data thresholds using both public satisfaction and the agreement to improve are presented for each state\u27s physical pavement indices (ride and condition)

H2A.Z facilitates access of active and repressive complexes to chromatin in embryonic stem cell self-renewal and differentiation.

SummaryChromatin modifications have been implicated in the self-renewal and differentiation of embryonic stem cells (ESCs). However, the function of histone variant H2A.Z in ESCs remains unclear. We show that H2A.Z is highly enriched at promoters and enhancers and is required for both efficient self-renewal and differentiation of murine ESCs. H2A.Z deposition leads to an abnormal nucleosome structure, decreased nucleosome occupancy, and increased chromatin accessibility. In self-renewing ESCs, knockdown of H2A.Z compromises OCT4 binding to its target genes and leads to decreased binding of MLL complexes to active genes and of PRC2 complex to repressed genes. During differentiation of ESCs, inhibition of H2A.Z also compromises RA-induced RARα binding, activation of differentiation markers, and the repression of pluripotency genes. We propose that H2A.Z mediates such contrasting activities by acting as a general facilitator that generates access for a variety of complexes, both activating and repressive

Public Perceptions of the Midwest’s Pavements - Minnesota - Executive Summary

This report summarizes Minnesota results of a five year, Pooled Fund study involving the Wisconsin, Iowa, and Minnesota DOTs designed to 1) assess the public\u27s perceptions of the departments’ pavement improvement strategies and 2) to develop customer-based thresholds of satisfaction with pavements on rural two lane highways in each state as related to the Departments’ physical indices, such as pavement ride and condition. The primary objective was to seek systematic customer input to improve the Departments’ pavement improvement policies by 1) determining how drivers perceive the departments’ pavements in terms of comfort and convenience but also in terms of other tradeoffs departments had not previously considered, 2) determining relationships between perceptions and measured pavement condition thresholds (including a general level of tolerance of winter ride conditions in two of the states), and 3) identifying important attributes and issues that may not have been considered in the past. Secondary objectives were 1) to provide a tool for systematic customer input in the future and 2) provide information which can help structure public information programs. A University of Wisconsin-Extension survey lab conducted the surveys under the direction of a multi-disciplinary team from Marquette University. Approximately 4500 drivers in the three states participated in the three phases of the project. Researchers conducted six focus groups in each state, approximately 400 statewide telephone interviews in each state and 700-800 targeted telephone interviews in each state. Approximately 400 winter ride interviews were conducted in Wisconsin and Minnesota. A summary of the method for each survey is included. In Phase I, focus groups were conducted with drivers to get an initial indication of what the driving public believes in regards to pavements and to frame issues for inclusion in the more representative state-wide surveys of drivers conducted in Phase II of the project. Phase II interviews gathered information about improvement policy trade-off issues and about preliminary thresholds of improvement in terms of physical pavement indices. In Phase III, a two-step recruitment and post-drive interview procedure yielded thresholds of ride and condition index summarized for each state. Results show that, in general, the driving public wants longer lasting pavements and are willing to pay for them. They want to minimize construction delay, improve entire sections of highway at one time but they dislike detours, and prefer construction under traffic even if it stretches out construction time. Satisfaction with pavements does not correlate directly to a high degree with physical pavement indices, but was found instead to be a complex, multi-faceted phenomenon. A psychological model (after Fishbein/Ajzen) was applied to explain satisfaction to a respectable degree (R2 of .67) for the social sciences. Results also indicate a high degree of trust in the three DOTs which is enhanced when the public is asked for input on specific highway segments. Conclusions and recommendations include a three-step methodology for other state studies. Physical data thresholds based on both public satisfaction and the agreement to improve are presented for each state\u27s physical pavement indices (ride and condition). Recommendations for changes to the quality ranges of the physical indices where appropriate are also made

Public Perceptions of the Midwest’s Pavements - Iowa - Phase III

There are several objectives to this report. The first objective is to describe the sample with regard to the physical pavement data and three measures of driver satisfaction. In this section, the proportion of respondents who are satisfied with pavements on two-lane, rural, state highways will be examined and the distribution of pavement condition and roughness indices will be presented. The second objective will be a short description of the highway segments and any differences in satisfaction found between regions and pavement types. This was done in Phase II in each state and a letter sent showing the results in all three states. That letter sets forth the revised work plan and budget for Phase III of the project. The third objective is to describe the relationship between physical pavement characteristics and driver satisfaction. This will include a description of both the magnitude of relationship as well as identifying critical International Road Index (IRI) and Pavement Condition Index (PCI) cutoffs where a majority of the sample were satisfied. This will be done for comparative purposes with the Phase II approach, using the total sample to compute cumulative percentages responding to each of the three series of satisfaction questions