1,022 research outputs found
Recommended from our members
Advances in test and measurement of the interface adhesion and bond strengths in coating-substrate systems, emphasising blister and bulk techniques
In this paper, recent advances in the minimum-destructive testing of the adhesion of coating-substrate systems are reviewed, focusing on key techniques such as micro- and nano-scale levels of indentation, scratching, laser-induced wave shock, as well as the blister and buckle approach. Along with adhesion failure tests, the latest and most extensive applications of the adhesion test methods in nano-, micro- and bulk-coating technology and the associated techniques to determine the minimum damage defects left on the coatings are discussed and their use reviewed
Recommended from our members
Generation of periodic surface structures on silica fibre surfaces using 405 nm CW diode lasers
Periodic surface structures have been observed on the end surfaces of synthetic silica fibres when they are exposed to long-term irradiation with light from a 405 nm CW diode laser. The surface structures are generated when the laser power is at a level which is three magnitudes of order lower than that of the damage threshold. They exhibit multiple bends, break-ups and bifurcations, unlike interference patterns but rather like the effect caused by short-pulsed laser irradiation on wide band-gap insulators. The detailed investigation undertaken in this work has concluded that the key parameters that contribute to the generation of the surface structures are power density, surface roughness, polarisation direction and the presence of ultraviolet defect centres
Recommended from our members
Studies on Temperature and Strain Sensitivities of a Few-mode Critical Wavelength Fiber Optic Sensor
This paper studied the relationship between the temperature/strain wavelength sensitivity of a fiber optic in-line Mach-Zehnder Interferometer (MZI) sensor and the wavelength separation of the measured wavelength to the critical wavelength (CWL) in a CWL-existed interference spectrum formed by interference between LP01 and LP02 modes. The in-line MZI fiber optic sensor has been constructed by splicing a section of specially designed few-mode fiber (FMF), which support LP01 and LP02 modes propagating in the fiber, between two pieces of single mode fiber. The propagation constant difference, Δβ, between the LP01 and LP02 modes, changes non-monotonously with wavelength and reaches a maximum at the CWL. As a result, in sensor operation, peaks on the different sides of the CWL then shift in opposite directions, and the associated temperature/strain sensitivities increase significantly when the measured wavelength points become close to the CWL, from both sides of the CWL. A theoretical analysis carried out has predicted that with this specified FMF sensor approach, the temperature/strain wavelength sensitivities are governed by the wavelength difference between the measured wavelength and the CWL. This conclusion was seen to agree well with the experimental results obtained. Combining the wavelength shifts of the peaks and the CWL in the transmission spectrum of the SFS structure, this study has shown that this approach forms the basis of effective designs of high sensitivity sensors for multi-parameter detection and offering a large measurement range to satisfy the requirements needed for better industrial measurements
Recommended from our members
High power 405 nm diode laser fiber-coupled single-mode system with high long-term stability
Fiber-coupled 405 nm diode laser systems are rarely used with fiber output powers higher than 50 mW. A quick degradation of fiber-coupled high power modules with wavelengths in the lower range of the visible spectrum is known for several years. Meanwhile, the typical power of single-mode diode lasers around 400 nm is in the order of 100 to 300 mW, leading to single-mode fiber core power densities in the 1 MW/cmĀ² range. This is three magnitudes of order below the known threshold for optical damage. Our profound investigations on the influence of 405 nm laser light irradiation of single-mode fibers found the growth of periodic surface structures in the form of ripples responsible for the power loss. The ripples are found on the proximal and distal fiber end surfaces, negatively impacting power transmission and beam quality, respectively. Important parameters in the generation of the surface structures are power density, surface roughness and polarization direction. A fiber-coupled high-power 405 nm diode laser system with a high long-term stability will be introduced and described
Erosion of the Geodetic Hills Fossil Forest, Axel Heiberg Island, Northwest Territories
Studies on the erosion of the Geodetic Hills Fossil Forest on the east side of Axel Heiberg Island, Northwest Territories have indicated that erosion by wind averaged a depth of 1.3 cm for the period 1988 to 1992. The fossil wood and leaf litter tend to dry on exposure, resulting in shrinkage and fragmentation - sometimes in less than a year. Frost, especially at the boundaries of polygons, repeatedly compresses and disrupts the fossil-bearing strata. Erosion by water takes place as rills on the sides of hills. Solifluction displaces surface sediment on the sides of the hills in the range of 6 to 45 cm per year. In the last few years the physical disruption of stumps, tree trunks and forest mat has been caused mainly by people: by walking on the site, by excavating it, and by flying over and landing helicopters on it. Natural processes - including wind, freezing and thawing, rainfall, and wandering animals - also cause damage. In 1992, 62 stumps recorded in the 1988 survey (ca. 10% of the total) could not be relocated. There are problems in accounting for this discrepancy, because only a few stumps are known to have been removed by investigators for study, and it seems unlikely (although it is possible) that others may have been removed by unknown visitors. Some of the "missing" stumps may still be present, but disturbance in the surface sediment caused by scientific excavation or wind-driven accretion have made them untraceable. Vestigial stumps may simply have weathered away in the period between surveys, and finally some of the losses may be accounted for by errors in the initial surveying. Since preservation is important both for long-term scientific interpretation and for public access, the site should be better managed. The authors advocate that the site be managed by the Canadian Parks Service as an annex to Ellesmere Island National Park Reserve.Key words: fossil forest, Axel Heiberg Island, wood, leaf litter, erosion, preservationDes études sur l'érosion de la forêt fossile des collines géodésiques du côté est de l'île Axel Heiberg dans les Territoires du Nord-Ouest ont révélé que l'érosion éolienne était d'en moyenne 1,3 cm au cours de la période allant de 1988 à 1992. Le bois et la couche de feuilles mortes fossiles ont tendance à sécher s'ils sont exposés aux éléments, ce qui aboutit au retrait et à la fragmentation - parfois en moins d'un an. Le gel, en particulier aux limites des polygones, comprime et disloque les strates fossilifères de façon répétée. L'érosion hydrique se produit sous forme de rigoles sur les pentes des collines. La solifluxion déloge les sédiments de surface sur les pentes des collines à une vitesse de 6 à 45 cm par an. Au cours des dernières années, la perturbation physique des souches, des troncs d'arbre et du tapis forestier a été causée principalement par les humains: piétinement et excavation du site, survols et atterrissages des hélicoptères. Les processus naturels - y compris le vent, le gel et dégel, les précipitations et le déplacement des animaux - causent également des dommages. En 1992, 62 souches consignées dans le relevé de 1988 (environ 10 p. cent du total) n'ont pu être retrouvées. On a de la difficulté à expliquer cet écart, car on sait que quelques souches seulement ont été enlevées par les chercheurs pour effectuer leurs travaux, et il semble peu probable (bien que ce soit possible) que d'autres souches aient été enlevées par des visiteurs inconnus. Il se peut que certaines des souches «absentes» soient toujours présentes, mais la perturbation des sédiments de surface causée par des excavations scientifiques ou l'accrétion éolienne fait qu'elles sont impossibles à retracer. Des souches résiduelles ont peut-être tout simplement été détruites par les éléments durant les périodes entre les relevés, et finalement, certaines des pertes peuvent être expliquées par des erreurs dans le relevé initial. Vu que la conservation est importante à la fois pour l'interprétation scientifique à long terme et pour l'accès du public, le site devrait être mieux géré. Les auteurs recommandent que la gestion en soit remise au Service canadien des parcs, en tant qu'annexe à la réserve de parc national de l'île-d'Ellesmere.Mots clés: forêt fossile, île Axel Heiberg, bois, couche de feuilles mortes, érosion, conservatio
Infinite barbarians
This paper discusses an infinite regress that looms behind a certain kind of historical explanation. The movement of one barbarian group is often explained by the movement of others, but those movements in turn call for an explanation. While their explanation can again be the movement of yet another group of barbarians, if this sort of explanation does not stop somewhere we are left with an infinite regress of barbarians. While that regress would be vicious, it cannot be accommodated by several general views about what viciousness in infinite regresses amounts to. This example is additional evidence that we should prefer a pluralist approach to infinite regresses
Prolactin maintains transient melanināconcentrating hormone expression in the medial preoptic area during established lactation
Recommended from our members
Room-Temperature Power-Stabilized Narrow-Linewidth Tunable Erbium-Doped Fiber Ring Laser Based on Cascaded Mach-Zehnder Interferometers with Different Free Spectral Range for Strain Sensing
An automatically power-stabilized (with power fluctuation <0.155 dB), narrow-linewidth (0.0171 nm), wavelength-tunable (10.69 nm) erbium-doped fiber laser has been proposed by cascading two fiber Mach-Zehnder interferometers (MZI) without using any temperature controlling device. One of the MZIs (here called the 1st MZI) is composed of two 3 dB couplers to form interference patterns while the other MZI (here termed the 2nd MZI) is constructed with a tapered seven-core fiber (SCF) and based on the principle of supermode interference. For the two MZIs, the free spectral range (FSR), the passband bandwidth and the extinction ratio (ER) at 1560 nm are 0.37 nm, 0.19 nm, 16.6 dB and 13.93 nm, 7.93 nm, 10.1 dB, respectively. Due to the major difference between the two FSR values, the 1st MZI and the 2nd MZI respectively play a role in controlling the laser linewidth and suppressing the homogeneous broadening effect to reach to a satisfactory level of power stability. The 2nd MZI is also used to fine tune the laser wavelength by applying strain to the tapered SCF (TSCF) over the spectral range of 1570.22-1559.33 nm, with an incremental step of 0.37 nm being used. The side-mode suppression ratio (SMSR) of the tunable fiber laser can be up to 45 dB. By appropriately adjusting the polarization controller, dual wavelength lasing can also be achieved. For single wavelength lasing, the 3 dB laser linewidth is 0.0171 nm. The power fluctuation, without a temperature controlling device being used and operating at room temperature, is found to be less than 0.155 dB over 1 hour while the central wavelength drift is less than 0.19 nm
The heavy metal content of skeletons from an ancient metalliferous polluted area in southern Jordan with particular reerence to bioaccumulation and human health
- ā¦