An Evidence-Based Survey on Full-Scale Membrane Biological Reactors: Main Technical Features and Operational Aspects

This paper presents the results of a survey on full-scale membrane biological reactors (MBRs) wastewater treatment plants (WWTPs) in Italy. Alongside the main technical characteristics of the Italian MBR plants, the opinions of the plant managers on the operational advantages and disadvantages are described. As reported by the MBR technology suppliers, approximately 290 MBR municipal or industrial WWTPs are in operation in Italy, out of which 242 were studied in this survey. Data from more than one hundred municipal WWTPs were collected; these account for a total capacity of about 2,000,000 population equivalent (PE), which corresponds to 3% of the total organic load treated by the Italian WWTPs with secondary and advanced treatment. Usually, small installations adopt the flat-sheet rather than hollow-fiber membrane configuration. The main reasons why the MBR technology has been preferred to other options are its potential to be used for increasing the treatment capacity of existing plants and its compactness. Moreover, the followed operational advantages have been highlighted: easiness to comply with the discharge limits, removal of pathogens without specific disinfection units, possibility of internal reuse of the effluent, and process automation. Membrane fouling and plant shutdown have been recorded as the most relevant troubles, the last one indeed occurring only occasionally or rarely

Biosolids: What are the different types of reuse?

In recent years, rapid population growth and industrialization have increased the use of natural resources and the production of waste. To develop a circular economy, it is necessary to study and promote alternative long-term solutions for waste disposal, such as reuse and recovery. Wastewater treatment plants (WWTPs) can be an important part of circular sustainability if re-oriented to function as a water resource recovery facilities (WRRFs). In this context, biological sewage sludge (SS) can be treated in order to produce more stabilized residues: biosolids (BS). This paper aims to review the possible alternatives to reuse the BS in order to increase matter recovery. Around 250 papers, reviews, books and conference proceedings have been examined. Authors explored the application of BS on land, such as soil amendment/fertilizer both in agriculture and for interventions on abandoned mine sites, and on engineering fields, in partial or total substitution of virgin materials. The reuse of BS as adsorbent materials and as a source of phosphorus is also discussed

Electrochemical Treatment of Arsenic in Drinking Water: Effect of Initial As3+ Concentration, pH, and Conductivity on the Kinetics of Oxidation

Many technologies for the treatment of arsenic-containing drinking water are available, but most of them are more effective on arsenic oxidized forms. Therefore, the pre-oxidation of As3+ is necessary. The electrochemical processes represent a very promising method due to the simultaneous oxidation of compounds using electrochemical conditions and the reactive radicals produced. In this work, As3+ oxidation was experimentally studied at a pilot scale using an electrochemical oxidation cell (voltage: 10 V; current: 1.7 A). The effect of the initial arsenite concentration, pH, and conductivity of drinking water on the oxidation of As3+ into As5+ was investigated. The results showed that the initial As3+ concentration strongly directly influences the oxidation process. Increasing the initial arsenite concentration from 500 to 5000 µg L−1, the pseudo-first order kinetic constant (k) strongly decreased from 0.521 to 0.038 min−1, and after 10 min, only 21.3% of As3+ was oxidized (vs. 99.9% in the case of As3+ equal to 500 µg L−1). Slightly alkaline conditions (pH = 8) favored the electrochemical oxidation into As5+, while the process was partially inhibited in the presence of a more alkaline or acidic pH. The increase in conductivity up to 2000 µS cm−1 enhanced the kinetic of the oxidation, despite remaining on the same order of magnitude as in the case of conductivity equal to 700 µS cm−1. After 10 min, 99.9 and 95% of As3+ was oxidized, respectively. It is the opinion of the authors that the influence of other operational factors, such as voltage and current density, and the impact of the high concentration of other pollutants should be deeply studied in order to optimize the process, especially in the case of an application at full scale. However, these results provide helpful indications to future research having highlighted the influence of initial As3+ concentration, pH, and conductivity on the electrochemical oxidation of arsenic

Discussion about the Latest Findings on the Possible Relation between Air Particulate Matter and COVID-19

Since SARS-CoV-2 was identified, the scientific community has tried to understand the variables that can influence its spread. Several studies have already highlighted a possible link between particulate matter (PM) and COVID-19. This work is a brief discussion about the latest findings on this topic, highlighting the gaps in the current results and possible tips for future studies. Based on the literature outcomes, PM is suspected to play a double role in COVID-19: a chronic and an acute one. The chronic role is related to the possible influence of long-term and short-term exposure to high concentrations of PM in developing severe forms of COVID-19, including death. The acute role is linked to the possible carrier function of PM in SARS-CoV-2. The scientific community seems sure that the inflammatory effect on the respiratory system of short-term exposure to a high concentration of PM, and other additional negative effects on human health in cases of longer exposure, increases the risk of developing a more severe form of COVID-19 in cases of contagion. On the contrary, the results regarding PM acting as a carrier of SARS-CoV-2 are more conflicting, especially regarding the possible inactivation of the virus in the environment, and no final explanation on the possible acute role of PM in the spread of COVID-19 can be inferred

Optimum operating conditions for a real scale ammonia stripping tower: An experimental case

In recent years, several studies focused on developing processes aimed at recovering nutrients such as nitrogen. In this paper, a real plant for ammonia stripping has been tested on a real aqueous waste in order to optimize the process conditions (air flow rate and pH). The results of a finite element mathematical model were compared with the ones of experimental tests. The results showed that 500 Nm3/h was the minimum flow rate necessary to allow reaching ammonia nitrogen removals close to 80% in 9 hours of stripping (reactor operating in semi-batch mode). Moreover, the tests showed the possibility of increasing the pH value by exploiting the alkalinity that characterizes the digestates without the dosage of reagents for basification (e.g. NaOH)

Impact of Polarization Reversal during Photoelectrocatalytic Treatment of WWTP Effluents

Photoelectrocatalysis (PEC) has been already proposed as a polishing treatment for wastewater treatment plants (WWTPs) effluents. In this work, the impact of polarization reversal during PEC process has been studied and evaluated on the basis of the removal of organic substance and color, biodegradability of the matrix, and inactivation of the catalyst. Effluents were sampled from a full-scale WWTP and alternatively treated by electrochemical oxidation (EC), photolysis (PL), photocatalysis (PC), photoelectrocatalysis, and photoelectrocatalysis with reverse polarization (PECr). The efficiency and the kinetics of the process, in terms of removal of organic substance and color, were not affected by reverse polarization and very similar results were obtained by PEC and PECr. The biodegradability of the effluents strongly increased both by PECr (RSBR: 0.84 ± 0.07), and by PEC and PL (0.89 ± 0.11, and 0.78 ± 0.02, respectively). In the selected polarization reversal mode (100 s at −0.1 V every 500 s at 4 V, cell voltage), a similar photocurrent loss after PEC and PECr was observed, suggesting no effect on the activity of the TiO2 mesh. This study can serve as a base for future research on polarization reversal to optimize operation parameters and exploit the procedure to preventing fouling and inactivation of the catalyst

Extraction and purification of phosphorus from the ashes of incinerated biological sewage sludge

Phosphorus depletion represents a significant problem. Ash of incinerated biological sewage sludge (BSS) contains P, but the presence of heavy metals (e.g., Fe and Al) is the main issue. Based on chemical characterization by SEM-EDS, ED-XRF and ICP-OES techniques, the characteristics and P content of bottom ash (BA) and fly ash (FA) of incinerated BSS were very similar. On BA, P extraction carried out in counter-current with an S:L ratio of 1:10 and H2SO4 0.5 M led to better extraction yields than those of a similar test with H2SO4 1 M and an S:L ratio of 1:5 (93% vs. 86%). Comparing yields with H2SO4 0.5 M (S:L ratio of 1:10), the counter-current method gave better results than those of the crossflow method (93% vs. 83.9%), also improving the performance obtained with HCl in crossflow (93% vs. 89.3%). The results suggest that the purification of the acid extract from heavy metals with pH variation was impractical due to metal precipitation as phosphates. Extraction with H2SO4 and subsequent treatment with isoamyl alcohol represented the best option to extract and purify P, leading to 81% extraction yields of P with low amounts of metals

Understanding the Influence of Diverse Non‐Volatile Media on Rheological Properties of Thermophilic Biological Sludge and Evaluation of Its Thixotropic Behaviour

In this study, the rheological properties of thermophilic biological sludge (TBS) have been investigated evaluating the influence of non‐volatile solids (NVS). Calcium carbonate, sand, and sodium bentonite were separately added to the sludge to evaluate the effect of concentration and type of NVS. Results show that TBS consistency coefficient significantly enhanced increasing sodium bentonite concentration. On the contrary, calcium carbonate and sand showed relatively small influence on the rheological properties of TBS. Thixotropic behaviour of TBS has also been investigated and is more pronounced at higher shear rate (1000 s−1). Double exponential fitting model was the best choice to represent thixotropic behaviour in case of low (100 s−1) and high shear rate (1000 s−1), while a single‐exponential model represents the best option in case of medium shear rate (400 s−1)