Enhanced Piezoelectricity of Electrospun Polyvinylidene Fluoride Fibers for Energy Harvesting

Piezoelectric polymers are promising energy materials for wearable and implantable applications for replacing bulky batteries in small and flexible electronics. Therefore, many research studies are focused on understanding the behavior of polymers at a molecular level and designing new polymer-based generators using polyvinylidene fluoride (PVDF). In this work, we investigated the influence of voltage polarity and ambient relative humidity in electrospinning of PVDF for energy-harvesting applications. A multitechnique approach combining microscopy and spectroscopy was used to study the content of the β-phase and piezoelectric properties of PVDF fibers. We shed new light on β-phase crystallization in electrospun PVDF and showed the enhanced piezoelectric response of the PVDF fiber-based generator produced with the negative voltage polarity at a relative humidity of 60%. Above all, we proved that not only crystallinity but also surface chemistry is crucial for improving piezoelectric performance in PVDF fibers. Controlling relative humidity and voltage polarity increased the d33 piezoelectric coefficient for PVDF fibers by more than three times and allowed us to generate a power density of 0.6 μW·cm-2 from PVDF membranes. This study showed that the electrospinning technique can be used as a single-step process for obtaining a vast spectrum of PVDF fibers exhibiting different physicochemical properties with β-phase crystallinity reaching up to 74%. The humidity and voltage polarity are critical factors in respect of chemistry of the material on piezoelectricity of PVDF fibers, which establishes a novel route to engineer materials for energy-harvesting and sensing applications

Surface Potential Driven Water Harvesting from Fog.

Access to clean water is a global challenge, and fog collectors are a promising solution. Polycarbonate (PC) fibers have been used in fog collectors but with limited efficiency. In this study, we show that controlling voltage polarity and humidity during the electrospinning of PC fibers improves their surface properties for water collection capability. We experimentally measured the effect of both the surface morphology and the chemistry of PC fiber on their surface potential and mechanical properties in relation to the water collection efficiency from fog. PC fibers produced at high humidity and with negative voltage polarity show a superior water collection rate combined with the highest tensile strength. We proved that electric potential on surface and morphology are crucial, as often designed by nature, for enhancing the water collection capabilities via the single-step production of fibers without any postprocessing needs

Registration of ICG 12991 peanut germplasm line

ICG 12991 is a short duration (90–110 d to maturation), drought-tolerant, spanish-type peanut (Arachis hypogaea L. subsp. fastigiata Waldron var. vulgaris Harz.) germplasm line (Reg. no. GP-122, PI 639691) with a high level of field resistance to groundnut rosette disease (Naidu et al., 1999a; Subrahmanyam et al., 2000). Groundnut rosette disease results from a synergism of three agents: Groundnut rosette assistor virus (GRAV, a luteovirus), Groundnut rosette virus (GRV, an umbravirus), and a satellite RNA (sat RNA) of GRV. ICG 12991 was originally collected from a farmer’s field in south India in 1988. In 1994, ICRISAT introduced ICG 12991 into Malawi for evaluation during a germplasm screening program for resistance to groundnut rosette disease and early leaf spot disease (caused by Cercospora arachidicola S. Hori). Subsequently, ICG 12991 was released in Malawi as ‘Baka’ in 2001 and in Uganda as ‘Serenut 4T’ in 2002, following extensive testing and distribution by the national programs of each country. Resistance to groundnut rosette disease in ICG 12991 is due to aphid resistance, not due to resistance to the virus complex (Naidu et al., 1999b)

Registration of groundnut cultivar ICGV-SM 90704 with resistance to groundnut rosette

ICGV-SM 90704 is a high-yielding medium-duration groundnut germplasm developed at ICRISAT, Lilongwe, Malawi. It was derived from a cross between varieties RG1 and Mani Pintar, made in 1983. It was released in Uganda in 1999 as Serenut 2 and in Malawi in 2000 as ICGV-SM 90704. ICGV-Sm 90704 is resistant to groundnut rosette virus (GRV) but susceptible to aphid vector (Aphis craccivora) for GRV transmission. The yield performance, plant and seed characters of ICGV-SM 90704 are briefly described

Clinical Epidemiology of Malaria in the Highlands of Western Kenya

Malaria in the highlands of Kenya is traditionally regarded as unstable and limited by low temperature. Brief warm periods may facilitate malaria transmission and are therefore able to generate epidemic conditions in immunologically naive human populations living at high altitudes. The adult:child ratio (ACR) of malaria admissions is a simple tool we have used to assess the degree of functional immunity in the catchment population of a health facility. Examples of ACR are collected from inpatient admission data at facilities with a range of malaria endemicities in Kenya. Two decades of inpatient malaria admission data from three health facilities in a high-altitude area of western Kenya do not support the canonical view of unstable transmission. The malaria of the region is best described as seasonal and meso-endemic. We discuss the implications for malaria control options in the Kenyan highlands

Defining and Detecting Malaria Epidemics in the Highlands of Western Kenya

Epidemic detection algorithms are being increasingly recommended for malaria surveillance in sub-Saharan Africa. We present the results of applying three simple epidemic detection techniques to routinely collected longitudinal pediatric malaria admissions data from three health facilities in the highlands of western Kenya in the late 1980s and 1990s. The algorithms tested were chosen because they could be feasibly implemented at the health facility level in sub-Saharan Africa. Assumptions of these techniques about the normal distribution of admissions data and the confidence intervals used to define normal years were also investigated. All techniques identified two “epidemic” years in one of the sites. The untransformed Cullen method with standard confidence intervals detected the two “epidemic” years in the remaining two sites but also triggered many false alarms. The performance of these methods is discussed and comments made about their appropriateness for the highlands of western Keny

Recent advances and perspectives on starch nanocomposites for packaging applications

Starch nanocomposites are popular and abundant materials in packaging sectors. The aim of this work is to review some of the most popular starch nanocomposite systems that have been used nowadays. Due to a wide range of applicable reinforcements, nanocomposite systems are investigated based on nanofiller type such as nanoclays, polysaccharides and carbonaceous nanofillers. Furthermore, the structures of starch and material preparation methods for their nanocomposites are also mentioned in this review. It is clearly presented that mechanical, thermal and barrier properties of plasticised starch can be improved with well-dispersed nanofillers in starch nanocomposites

Surface Potential Driven Water Harvesting from Fog.

Access to clean water is a global challenge, and fog collectors are a promising solution. Polycarbonate (PC) fibers have been used in fog collectors but with limited efficiency. In this study, we show that controlling voltage polarity and humidity during the electrospinning of PC fibers improves their surface properties for water collection capability. We experimentally measured the effect of both the surface morphology and the chemistry of PC fiber on their surface potential and mechanical properties in relation to the water collection efficiency from fog. PC fibers produced at high humidity and with negative voltage polarity show a superior water collection rate combined with the highest tensile strength. We proved that electric potential on surface and morphology are crucial, as often designed by nature, for enhancing the water collection capabilities via the single-step production of fibers without any postprocessing needs

Inductive and Mesomeric Effects of the [60]Fulleropyrrolidine Fragment and [60]Fullerene Sphere: A Quantitative Evaluation Based on Theory and Experiments

Inductive and mesomeric effects of the [60]fulleropyrrolidine (Pyr=C(60)) and the [60]fullerene (C(60)) molecular frameworks have been investigated by linear free energy relationship analyses. The electronic effects of these moieties have been studied by expressly designing [60] fulleropyrrolidine derivative 1, which has a C-H bond alpha to both a carbonyl group (CH(alpha)) and a C(60) cage. The extent of polarization of such a bond was then used to probe electron-withdrawing perturbation induced by the fullerene sphere. Thermodynamic measurements based on both theoretical and experimental approaches allowed the acidity of ketone 1 to be measured; this resulted in about a 1 x 10(6)-fold increase in acidity with respect to that of the structurally correlated acetophenone. Experimental and theoretical kinetic determinations were used to determine the stereolability of ketone 1, which was, in fact, chiral due to the stereogenic carbon alpha to the carbonyl group. Also, these results confirmed the very strong tendency for the C(60) sphere to promote breaking of the C-H(alpha) bond. This means that the Pyr=C(60) and C(60) fragments are able to express electron-withdrawing effects stronger than those of halogen atoms, but less effective than those of carbonyl derivatives (e.g., ketones, carboxylic acids or acyl derivatives). Finally, the sigma(p), sigma(I) and sigma(-)(R) descriptors of inductive and/or mesomeric effects were successfully estimated for both Pyr=C(60) and C(60) fragments thanks to the integrated use of an original procedure based on semi-empirical calculations and Hammett/Taft correlations involving mono-or dual-parameter equations