8,130 research outputs found
Structural design of an in-line bolted joint for the space shuttle solid rocket motor case segments
Results of a structural design study of an in-line bolted joint concept which can be used to assemble Space Shuttle Solid Rocket Motor (SRM) case segments are presented. Numerous parametric studies are performed to characterize the in-line bolted joint behavior as major design variables are altered, with the primary objective always being to keep the inside of the joint (where the O-rings are located) closed during the SRM firing. The resulting design has 180 1-inch studs, an eccentricity of -0.5 inch, a flange thickness of 3/4 inch, a bearing plate thickness of 1/4 inch, and the studs are subjected to a preload which is 70% of ultimate. The mass penalty per case segment joint for the in-line design is 346 lbm more than the weight penalty for the proposed capture tang fix
Lightweight structural design of a bolted case joint for the space shuttle solid rocket motor
The structural design of a bolted joint with a static face seal which can be used to join Space Shuttle Solid Rocket Motor (SRM) case segments is given. Results from numerous finite element parametric studies indicate that the bolted joint meets the design requirement of preventing joint opening at the O-ring locations during SRM pressurization. A final design recommended for further development has the following parameters: 180 one-in.-diam. studs, stud centerline offset of 0.5 in radially inward from the shell wall center line, flange thickness of 0.75 in, bearing plate thickness of 0.25 in, studs prestressed to 70 percent of ultimate load, and the intermediate alcove. The design has a mass penalty of 1096 lbm, which is 164 lbm greater than the currently proposed capture tang redesign
Characteristics of Magnetohydrodynamic Oscillations Observed with Michelson Doppler Imager
We report on the spatial distribution of magnetogram oscillatory power and
phase angles between velocity and magnetogram signals as observed with the
Michelson Doppler Imager. The dataset is 151.25 arcsec times 151.25 arcsec
containing sunspot from Dec 2, 1997 with a temporal sampling interval of 60
seconds and spatial sampling of 0.605 arcsec. Simultaneously observed continuum
intensity and surface velocity accompany the magnetic information. We focus on
three frequency regimes: 0.5-1.0, 3.0-3.5 and 5.5-6.0 mHz corresponding roughly
to timescales of magnetic evolution, p-modes and the 3 minute resonant sunspot
oscillation. Significant low frequency magnetogram power is found in lower flux
pixels, 100-300 Gauss, in a striking ring with filamentary structure
surrounding sunspot. Five minute magnetogram power peaks in extended regions of
flux 600-800 Gauss. The 3 minute oscillation is observed in sunspot umbra in
pixels whose flux measures 1300-1500 Gauss. Phase angles of approximately -90
degrees between velocity and magnetic flux in the 3.0-3.5 and 5.5-6.0 mHz
regimes are found in regions of significant cross amplitude.Comment: 4 Pages, 4 Figures -- For better Figure files see:
http://www.astro.ucla.edu/~norton/pub_list.htm
How environment and self-motion combine in neural representations of space
Estimates of location or orientation can be constructed solely from sensory information representing environmental cues. In unfamiliar or sensory-poor environments, these estimates can also be maintained and updated by integrating self-motion information. However, the accumulation of error dictates that updated representations of heading direction and location become progressively less reliable over time, and must be corrected by environmental sensory inputs when available. Anatomical, electrophysiological and behavioural evidence indicates that angular and translational path integration contributes to the firing of head direction cells and grid cells. We discuss how sensory inputs may be combined with self-motion information in the firing patterns of these cells. For head direction cells, direct projections from egocentric sensory representations of distal cues can help to correct cumulative errors. Grid cells may benefit from sensory inputs via boundary vector cells and place cells. However, the allocentric code of boundary vector cells and place cells requires consistent head-direction information in order to translate the sensory signal of egocentric boundary distance into allocentric boundary vector cell firing, suggesting that the different spatial representations found in and around the hippocampal formation are interdependent. We conclude that, rather than representing pure path integration, the firing of head-direction cells and grid cells reflects the interface between self-motion and environmental sensory information. Together with place cells and boundary vector cells they can support a coherent unitary representation of space based on both environmental sensory inputs and path integration signals
Magnetic phase diagram of the frustrated S=1/2 chain magnet LiCu_2O_2
We present the results of the magnetization and dielectric constant
measurements on untwinned single crystal samples of the frustrated S=1/2 chain
cuprate LiCu_2O_2. Novel magnetic phase transitions were observed. A spin flop
transition of the spiral spin plane was observed for the field orientations
H||a,b. The second magnetic transition was observed at H~15 T for all three
principal field directions. This high field magnetic phase is discussed as a
collinear spin-modulated phase which is expected for an S=1/2 nearest-neighbor
ferromagnetic and next-nearest-neighbor antiferromagnetic chain system
Mission description and in-flight operations of ERBE instruments on ERBS, NOAA 9, and NOAA 10 spacecraft
Instruments of the Earth Radiation Budget Experiment (ERBE) are operating on three different Earth-orbiting spacecraft. The Earth Radiation Budget Satellite (ERBS) is operated by NASA, and NOAA 9 and NOAA 10 weather satellites are operated by the National Oceanic and Atmospheric Administration (NOAA). This paper is the second in a series that describes the ERBE mission, and data processing and validation procedures. This paper describes the spacecraft and instrument operations for the second full year of in-orbit operations, which extend from February 1986 through January 1987. Validation and archival of radiation measurements made by ERBE instruments during this second year of operation were completed in July 1991. This period includes the only time, November 1986 through January 1987, during which all ERBE instruments aboard the ERBE, NOAA 9, and NOAA 10 spacecraft were simultaneously operational. This paper covers normal and special operations of the spacecraft and instruments, operational anomalies, and the responses of the instruments to in-orbit and seasonal variations in the solar environment
B-T phase diagram of CoCr2O4 in magnetic fields up to 14 T
We have measured the magnetization and specific heat of multiferroic CoCr2O4
in magnetic fields up to 14 T. The high-field magnetization measurements
indicate a new phase transition at T* = 5 - 6 K. The phase between T* and the
lock-in transition at 15 K is characterized by magnetic irreversibility. At
higher magnetic fields, the irreversibility increases. Specific-heat
measurements confirm the transition at T*, and also show irreversible behavior.
We construct a field-temperature phase diagram of CoCr2O4.Comment: 4 page
- …