386 research outputs found
Electrochemically tuneable multi-colour electrochemiluminescence using a single emitter
A single starting component electrochemiluminescence system from which red, green, blue or white emission can be obtained, depending on the applied potential or the mode of the ECL experiment, is described. The convoluted ECL spectral responses observed at different potentials are readily explained using a 3D-ECL technique, where the ECL spectral profile is continuously monitored as a function of potential during voltammetric scanning. The 3D plots obtained using this technique implicate cross-annihilation ECL reactions involving the complex itself and stable products resulting from its electrolysis. Combining this information with knowledge of the energetic requirements of the various reactions involved, suggests a mechanism involving traces of two emissive products, related to the loss of a methyl group from the triazole moiety. These products, while barely detectable electrochemically, are sufficiently emissive to influence and even dominate the ECL emission under some conditions
Annealing-enhanced birefringence and aggregation in MEH-PPV : a spectroscopic ellipsometry study
Funding: UK EPSRC (GR/S62628/01) and Royal Society Wolfson Research Merit Award (I.D.W.S.).We have used absorption, photoluminescence (PL) and variable angle spectroscopic ellipsometry (VASE) measurements to investigate the structural changes that take place upon high temperature annealing in spin-coated films of the prototypical conjugated polymer (CP) poly[2-(2â-ethylhexyloxy)-5-methoxy-1,4-phenylenevinylene] (MEH-PPV). Absorption and VASE measurements reveal that the birefringence of the films increases by approximately a factor of two upon heating, which indicates significant increase in the alignment of the conjugated polymer (CP) strands within the film plane. Absorption and PL spectra indicate the formation in annealed films of interchain species having lower energy transitions. But these measurements alone do not reveal the type of interchain species formed, such as excimers or aggregates. VASE measurements were used to investigate this feature and clearly reveal a new, low energy, feature with a shoulder at 650 nm in the dispersion relations of the extraordinary (out-of-plane) extinction and absorption coefficients of annealed films, which we assign to aggregate absorption. Thus, our work shows that VASE is a sensitive enough technique to measure aggregate absorption in CP films. In the case of the ordinary (in-plane) extinction and absorption coefficients, there is increased amplitude of the lower energy peak upon heating, owing to increased uniaxial anisotropy, along with a broadening and a longer red-tail, but the well-resolved red-shifted absorption band seen for the extraordinary absorption coefficient, is not observed. Therefore, we conclude that while in-plane and out-of-plane aggregation occurs in annealed spin-coated films of MEH-PPV, aggregate absorption is only clearly observed when the aggregate electronic transition dipole is oriented preferentially in a direction perpendicular to the film plane. This conclusion is consistent with the usual observation that aggregate absorption in MEH-PPV films is not easily observed using absorption spectra alone, which are typically measured at normal incidence.PostprintPeer reviewe
Effect of precursor macromonomer molecular weight on poly(dimethylsiloxane) film morphology and nitroaromatic vapor sorption
The capability to detect nitro-based explosives from their vapor is often limited by their low vapor pressure. One approach for overcoming this limitation is to use a solid-state pre-concentrator. The sorption and desorption of nitroaromatic vapors by poly(dimethylsiloxane)-based (PDMS) films fabricated from three different molecular weights of hydroxy-terminated poly(dimethylsiloxane) (HO-PDMS) macromonomers has been investigated. It was found that independent of macromonomer molecular weight, all the PDMS films were able to sorb nitro-based explosive analyte. However, for PDMS films of similar thickness, those formed from the lowest molecular weight macromonomer sorbed the least analyte and had the poorest retention capability. Atomic Force Microscopy (AFM) suggested that at least a proportion of the analyte was adsorbed onto the surface of the PDMS film formed from the low molecular weight macromonomer. PDMS films from the higher molecular weight macromonomers sorb more analyte with the vapor diffusing into the bulk of the film. PDMS films formed from the 750 cSt macromonomer were found to have the best analyte sorption and retention properties. The best pre-concentrator film was determined to increase the available analyte for vapor detection by up to 2 orders of magnitude. (C) 2018 Elsevier B.V. All rights reserved
The nature and role of trap states in a dendrimer-based organic field-effect transistor explosive sensor
We report the fabrication and charge transport characterization of carbazole dendrimer-based organic field-effect transistors (OFETs) for the sensing of explosive vapors. After exposure to para-nitrotoluene (pNT) vapor, the OFET channel carrier mobility decreases due to trapping induced by the absorbed pNT. The influence of trap states on transport in devices before and after exposure to pNT vapor has been determined using temperature-dependent measurements of the field-effect mobility. These data clearly show that the absorption of pNT vapor into the dendrimer active layer results in the formation of additional trap states. Such states inhibit charge transport by decreasing the density of conducting states. (C) 2013 AIP Publishing LLC
Experimental methods, synthetic routes, optical gap estimation, DSC traces, CV traces, mobility measurements, PL quenching spectra and OPV results
1. ExperimentalMaterials and SynthesisDevice Fabrication:2. Optical gap estimation3. TGA4. Differential Scanning Calorimetry5. Cyclic Voltammetry6. Photoluminescence Quenching7. Mobility measurements8. OPV result
Large area monolithic organic solar cells
Although efficiencies of > 10% have recently been achieved in laboratory-scale organic solar cells, these competitive performance figures are yet to be translated to large active areas and geometries relevant for viable manufacturing. One of the factors hindering scale-up is a lack of knowledge of device physics at the sub-module level, particularly cell architecture, electrode geometry and current collection pathways. A more in depth understanding of how photocurrent and photovoltage extraction can be optimised over large active areas is urgently needed. Another key factor suppressing conversion efficiencies in large area cells is the relatively high sheet resistance of the transparent conducting anode typically indium tin oxide. Hence, to replace ITO with alternative transparent conducting anodes is also a high priority on the pathway to viable module-level organic solar cells. In our paper we will focus on large area devices relevant to sub-module scales - 5 cm x 5 cm monolithic geometry. We have applied a range of experimental techniques to create a more comprehensive understanding of the true device physics that could help make large area, monolithic organic solar cells more viable. By employing this knowledge, a novel transparent anode consisting of molybdenum oxide (MoOx) and silver (Ag) is developed to replace ITO and PEDOT-free large area solar cell sub-modules, acting as both a transparent window and hole-collecting electrode. The proposed architecture and anode materials are well suited to high throughput, low cost all-solution processing
Effect of n-propyl substituents on the emission properties of blue phosphorescent iridium(iii) complexes
Ligand substitution is often used for tuning the emission color of phosphorescent iridium(iii) complexes that are used in organic light-emitting diodes. However, in addition to tuning the emission color, the substituents can also affect the radiative and non-radiative decay rates of the excited state and hence the photoluminescence quantum yield. Understanding the substituent effect is therefore important for the design of new iridium(iii) complexes with specific emission properties. Using (time dependent) density functional methods, we investigate the substituent effect of n-propyl groups on the structure, emission color, and emission efficiency of fac-tris(1-methyl-5-phenyl-[1,2,4]triazolyl)iridium(iii) based phosphorescent complexes by comparing the calculated results for structural models with and without the n-propyl substituents. We find that attachment of the n-propyl groups increases the length of three IrâN bonds, and although the emission color does not change significantly, the radiative and non-radiative rates do, leading to a prediction of enhanced blue phosphorescence emission efficiency. Furthermore, the calculations show that the attachment of the n-propyl groups leads to a larger activation energy to degradation and the formation of dark states
Spectral Dependence of the Internal Quantum Efficiency of Organic Solar Cells: Effect of Charge Generation Pathways
The conventional picture of photocurrent generation in organic solar cells involves photoexcitation of the electron donor, followed by electron transfer to the acceptor via an interfacial charge-transfer state (Channel I). It has been shown that the mirror-image process of acceptor photoexcitation leading to hole transfer to the donor is also an efficient means to generate photocurrent (Channel II). The donor and acceptor components may have overlapping or distinct absorption characteristics. Hence, different excitation wavelengths may preferentially activate one channel or the other, or indeed both. As such, the internal quantum efficiency (IQE) of the solar cell may likewise depend on the excitation wavelength. We show that several model high-efficiency organic solar cell blends, notably PCDTBT:PC70BM and PCPDTBT:PC60/70BM, exhibit flat IQEs across the visible spectrum, suggesting that charge generation is occurring either via a dominant single channel or via both channels but with comparable efficiencies. In contrast, blends of the narrow optical gap copolymer DPP-DTT with PC70BM show two distinct spectrally flat regions in their IQEs, consistent with the two channels operating at different efficiencies. The observed energy dependence of the IQE can be successfully modeled as two parallel photodiodes, each with its own energetics and exciton dynamics but both having the same extraction efficiency. Hence, an excitation-energy dependence of the IQE in this case can be explained as the interplay between two photocurrent-generating channels, without recourse to hot excitons or other exotic processes
Recombination Losses Above and Below the Transport Percolation Threshold in Bulk Heterojunction Organic Solar Cells
Achieving the highest power conversion efficiencies in bulk heterojunction organic solar cells requires a morphology that delivers electron and hole percolation pathways for optimized transport, plus sufficient donor:acceptor contact area for near unity charge transfer state formation. This is a significant structural challenge, particularly in semiconducting polymer:fullerene systems. This balancing act in the model high efficiency PTB7:PC70BM blend is studied by tuning the donor:acceptor ratio, with a view to understanding the recombination loss mechanisms above and below the fullerene transport percolation threshold. The internal quantum efficiency is found to be strongly correlated to the slower carrier mobility in agreement with other recent studies. Furthermore, secondâorder recombination losses dominate the shape of the current densityâvoltage curve in efficient blend combinations, where the fullerene phase is percolated. However, below the charge transport percolation threshold, there is an electricâfield dependence of firstâorder losses, which includes electricâfieldâdependent photogeneration. In the intermediate regime, the fill factor appears to be limited by both firstâ and secondâorder losses. These findings provide additional basic understanding of the interplay between the bulk heterojunction morphology and the order of recombination in organic solar cells. They also shed light on the limitations of widely used transport models below the percolation threshold
Influence of chromophore spacing on the stability and efficiency of host-free sky-blue dendrimer organic light emitting diodes
- âŠ