1,434 research outputs found
Analysis of the EM scattering from arbitrary open-ended waveguide cavities using axial Gaussian Beam tracking
The electromagnetic (EM) scattering from a planar termination located inside relatively arbitrarily shaped open-ended waveguide cavities with smoothly curved interior walls is analyzed using a Gaussian Beam (GB) expansion of the incident plane wave fields in the open end. The cavities under consideration may contain perfectly-conducting interior walls with or without a thin layer of material coating, or the walls may be characterized by an impedance boundary condition. In the present approach, the GB's are tracked only to the termination of the waveguide cavity via beam reflections from interior waveguide cavity walls. The Gaussian beams are tracked approximately only along their beam axes; this approximation which remains valid for relatively well focussed beams assumes that an incident GB gives rise to a reflected GB with parameters related to the incident beam and the radius of curvature of the wall. It is found that this approximation breaks down for GB's which come close to grazing a convex surface and when the width of the incident beam is comparable to the radius of curvature of the surface. The expansion of the fields at the open end depend on the incidence angle only through the expansion coefficients, so the GB's need to be tracked through the waveguide cavity only once for a wide range of incidence angles. At the termination, the sum of all the GB's are integrated using a result developed from a generalized reciprocity principle, to give the fields scattered from the interior of the cavity. The rim edge at the open end of the cavity is assumed to be sharp and the external scattering from the rim is added separately using Geometrical Theory of Diffraction. The results based on the present approach are compared with solutions based on the hybrid asymptotic modal method. The agreement is found to be very good for cavities made up of planar surfaces, and also for cavities with curved surfaces which are not too long with respect to their width
A hybrid asymptotic-modal analysis of the EM scattering by an open-ended S-shaped rectangular waveguide cavity
The electromagnetic fields (EM) backscatter from a 3-dimensional perfectly conducting S-shaped open-ended cavity with a planar interior termination is analyzed when it is illuminated by an external plane wave. The analysis is based on a self-consistent multiple scattering method which accounts for the multiple wave interactions between the open end and the interior termination. The scattering matrices which described the reflection and transmission coefficients of the waveguide modes reflected and transmitted at each junction between the different waveguide sections, as well at the scattering from the edges at the open end are found via asymptotic high frequency methods such as the geometrical and physical theories of diffraction used in conjunction with the equivalent current method. The numerical results for an S-shaped inlet cavity are compared with the backscatter from a straight inlet cavity; the backscattered patterns are different because the curvature of an S-shaped inlet cavity redistributes the energy reflected from the interior termination in a way that is different from a straight inlet cavity
Electromagnetic properties of material coated surfaces
The electromagnetic properties of material coated conducting surfaces were investigated. The coating geometries consist of uniform layers over a planar surface, irregularly shaped formations near edges and randomly positioned, electrically small, irregularly shaped formations over a surface. Techniques to measure the scattered field and constitutive parameters from these geometries were studied. The significance of the scattered field from these geometries warrants further study
High-frequency asymptotic methods for analyzing the EM scattering by open-ended waveguide cavities
Four high-frequency methods are described for analyzing the electromagnetic (EM) scattering by electrically large open-ended cavities. They are: (1) a hybrid combination of waveguide modal analysis and high-frequency asymptotics, (2) geometrical optics (GO) ray shooting, (3) Gaussian beam (GB) shooting, and (4) the generalized ray expansion (GRE) method. The hybrid modal method gives very accurate results but is limited to cavities which are made up of sections of uniform waveguides for which the modal fields are known. The GO ray shooting method can be applied to much more arbitrary cavity geometries and can handle absorber treated interior walls, but it generally only predicts the major trends of the RCS pattern and not the details. Also, a very large number of rays need to be tracked for each new incidence angle. Like the GO ray shooting method, the GB shooting method can handle more arbitrary cavities, but it is much more efficient and generally more accurate than the GO method because it includes the fields diffracted by the rim at the open end which enter the cavity. However, due to beam divergence effects the GB method is limited to cavities which are not very long compared to their width. The GRE method overcomes the length-to-width limitation of the GB method by replacing the GB's with GO ray tubes which are launched in the same manner as the GB's to include the interior rim diffracted field. This method gives good accuracy and is generally more efficient than the GO method, but a large number of ray tubes needs to be tracked
60 GHz indoor propagation studies for wireless communications based on a ray-tracing method
This paper demonstrates a ray-tracing method for modeling indoor propagation channels at 60 GHz. A validation of the ray-tracing model with our in-house measurement is also presented. Based on the validated model, the multipath channel parameter such as root mean square (RMS) delay spread and the fading statistics at millimeter wave frequencies are easily extracted. As such, the proposed ray-tracing method can provide vital information pertaining to the fading condition in a site-specific indoor environment
60 GHz indoor propagation studies for wireless communications based on a ray-tracing method
This paper demonstrates a ray-tracing method for modeling indoor propagation channels at 60 GHz. A validation of the ray-tracing model with our in-house measurement is also presented. Based on the validated model, the multipath channel parameter such as root mean square (RMS) delay spread and the fading statistics at millimeter wave frequencies are easily extracted. As such, the proposed ray-tracing method can provide vital information pertaining to the fading condition in a site-specific indoor environment
Immunoglobulin-A distribution in glomerular disease: Analysis of immunofluorescence localization and pathogenetic significance
Immunoglobulin-A distribution in glomerular disease. Analysis of immunofluorescence localization and pathogenetic significance. Renal biopsies from 470 patients with various glomemlonephropathies were studied for patterns and frequency of glomerular bound IgA. Correlations of IgA with IgG, IgM, C3, and C4 were made. Glomerular deposits of IgA were observed in five of six cases of Henoch-Schoenlein anaphylactoid nephritis (83%), stalk proliferative glomerulonephritis (73%), lupus nephritis (60%), and focal proliferative glomerulonephritis (57 %). In addition, IgA was less frequently observed in diffuse (acute) proliferative (33%), membranoproliferative (42%), membranous (32%), focal sclerosing (25%) crescentic (26%), and chronic glomerulonephritides (23%) as well as malignant arterionephrosclerosis, amyloidosis, and a group of patients with minimal glomerular alteration and no determinable diagnosis (40%). IgA was not specifically associated with IgG or IgM in any one diagnostic category but was often present with both. Deposits containing C3 and C4 most closely paralleled those of IgG and/or IgM. Presence of IgA appeared to correlate with variable degrees of increased glomerular mesangial cellularity in “minimal”, stalk proliferative, and focal-segmental glomerular lesions. The cause and immunopathogenetic significance of mesangial or peripheral glomerular capillary localization of IgA is unknown. Though a number of apparent examples of what has been referred to as IgA-IgG nephropathy were observed in this study, this entity, characterized by mesangial deposits of IgA, IgG, and C3, could not always be specifically identified or differentiated on histopathologic criteria alone from a variety of other glomerulopathies in which variable proportions of IgA, IgG, IgM, C3, and C4 globulins were localized
Bromine measurements in ozone depleted air over the Arctic Ocean
In situ measurements of ozone, photochemically active bromine compounds, and other trace gases over the Arctic Ocean in April 2008 are used to examine the chemistry and geographical extent of ozone depletion in the arctic marine boundary layer (MBL). Data were obtained from the NOAA WP-3D aircraft during the Aerosol, Radiation, and Cloud Processes affecting Arctic Climate (ARCPAC) study and the NASA DC-8 aircraft during the Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) study. Fast (1 s) and sensitive (detection limits at the low pptv level) measurements of BrCl and BrO were obtained from three different chemical ionization mass spectrometer (CIMS) instruments, and soluble bromide was measured with a mist chamber. The CIMS instruments also detected Br2. Subsequent laboratory studies showed that HOBr rapidly converts to Br2 on the Teflon instrument inlets. This detected Br2 is identified as active bromine and represents a lower limit of the sum HOBr + Br2. The measured active bromine is shown to likely be HOBr during daytime flights in the arctic. In the MBL over the Arctic Ocean, soluble bromide and active bromine were consistently elevated and ozone was depleted. Ozone depletion and active bromine enhancement were confined to the MBL that was capped by a temperature inversion at 200–500 m altitude. In ozone-depleted air, BrO rarely exceeded 10 pptv and was always substantially lower than soluble bromide that was as high as 40 pptv. BrCl was rarely enhanced above the 2 pptv detection limit, either in the MBL, over Alaska, or in the arctic free troposphere
Temperature dependence of UV absorption cross sections and atmospheric implications of several alkyl iodides
The ultraviolet absorption spectra of a number of alkyl iodides which have been found in the troposphere, CH_3I, C_2H_5I, CH_3CH_2CH_2I, CH_3CHICH_3, CH_2I_2, and CH2_ClI, have been measured over the wavelength range 200–380 nm and at temperatures between 298 and 210 K. The absorption spectra of the monoiodides C_H3I, C_2H_5I, CH_3CH_2CH_2I, and CH_3CHICH_3 are nearly identical in shape and magnitude and consist of single broad bands centered near 260 nm. The addition of a chlorine atom in CH_2ClI shifts its spectrum to longer wavelengths (σ_(max) at 270 nm). The spectrum of CH_2I_2 is further red‐shifted, reaching a maximum of 3.85×10^(−18) cm^2 molecule^(−1) at 288 nm and exhibiting strong absorption in the solar actinic region, λ>290 nm. Atmospheric photolysis rate constants, J values, have been calculated assuming quantum efficiencies of unity for different solar zenith angles as a function of altitude using the newly measured cross sections. Surface photolysis rate constants, calculated from the absorption cross sections measured at 298 K, range from 3×10^(−6) s^(−1) for CH)3I to 5×10^(−3) s^(−1) for CH)2I)2 at a solar zenith angle of 40°
Sensors for ceramic components in advanced propulsion systems
This report includes: (1) a survey of the current methods for the measurement of surface temperature of ceramic materials suitable for use as hot section flowpath components in aircraft gas turbine engines; (2) analysis and selection of three sensing techniques with potential to extend surface temperature measurement capability beyond current limits; and (3) design, manufacture, and evaluation of the three selected techniques which include the following: platinum rhodium thin film thermocouple on alumina and mullite substrates; doped silicon carbide thin film thermocouple on silicon carbide, silicon nitride, and aluminum nitride substrates; and long and short wavelength radiation pyrometry on the substrates listed above plus yttria stabilized zirconia. Measurement of surface emittance of these materials at elevated temperature was included as part of this effort
- …