39 research outputs found
Electrochemical impedance spectroscopy as a novel approach to investigate the influence of metal complexes on electrical properties of poly (vinyl alcohol)(PVA) composites
In the current study, black tea leaves extract solution (TES) as a new green technique is used to
fabricate metal-polyphenols complexes (X-polyphenols complex; X= Cu+2, Ce+3, and Cd+2). The
metal-complexes are integrated with poly (vinyl alcohol) (PVA) to prepare PVA composite films. The
electrical properties of pure PVA and composites are characterized using the electrochemical
impedance spectroscopy (EIS) method. The EIS data are fitted to the electrical equivalent circuit to
evaluate the impedance parameters of pure PVA and composite films. The trend of DC conductivity is
further verified by dielectric analysis. The electrical parameters are considerably improved upon
incorporating with the metal-complexes. The effects of the metal-complexes on the modification of
PVA are compared together. The PVA composite incorporated with the Cu+2-complex shows the
highest DC conductivity and dielectric constant, which is important for application in electrochemical
energy storage devices such as batteries and supercapacitors, in comparison with the Ce+3- and Cd+2-
complexes
Effect of ohmic-drop on electrochemical performance of EDLC fabricated from PVA:dextran:NH4I based polymer blend electrolytes
Proton conducting solid polymer blend electrolytes based on poly(vinyl alcohol)(PVA):dextran that were doped with different quantities of ammonium iodide (NH4I) were prepared. The X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) study were carried out to examine the compatibility of NH4I withPVA:dextran polymers. FTIR spectroscopy assessment was used to establish the presence of a complex formation between the PVA:dextran and added salt through the modification and reduction in the intensity of FTIR bands relevant to the functional groups. The field emission scanning electron microscopy (FESEM) examination was used to assess the channels for proton transport. Electrical impedance spectroscopy (EIS) was used to analyse the samples conductivity behaviour. The sample with 20 wt.% of added salt has shown a high DC conductivity which can be employed in electrochemical devices such as EDLC. It is also demonstrated by the transference number (TNM) and linear sweep voltammetry (LSV) that it is appropriate to use the largest conducting sample for electrochemical device. There was electrochemical stability of the electrolyte sample with voltage sweeping linearly to 1.3 V. It is shown by the outcome of cyclic voltammetry (CV) plot that charge storage at the site of electrode-electrolyte is non-Faradiac. A high drop voltage (Vd=IR) is implied by the usual galvanostatic charge-discharge. The equivalent series resistance (Res) increases as a result of the increase in Vd all the way through the charge-discharge cycle. Specific capacitance (Csp) is nearly constant from the foremost cycle to the 100th cycle, with average of 4.2 F/g
Structural and electrochemical studies of proton conducting biopolymer blend electrolytes based on MC:Dextran for EDLC device application with high energy density
This study shows preparation and characterization of solid biopolymer electrolyte based
on glycerolized methylcellulose (MC): dextran-doped with ammonium thiocyanate (NH4SCN). The
nature of electrolyte composition in terms of interaction is characterized using Fourier transform
infrared (FTIR) technique. Lowering and shifting in the intensity of the bands are observed with
increasing the quantity of glycerol as a plasticizer, confirming complexation between electrolyte components. Ion transport parameters are determined using both of the methods of EIS and FTIR
where the parameters are found to be increased with glycerol concentration. The transport number
measurement indicates that ions are the primary charge carrier in the conduction mechanism where
tion is found to be 0.961. The maximum DC ionic conductivity value is achieved that found to be
1.63 � 10�3 S cm�1. The ESR values are ranged from 300 to 580 O throughout 450 cycles. The technique
of linear sweep voltammetry (LSV) shows the electrochemical stability window of 2 V for the
conducting samples. The response of cyclic voltammetry (CV) shows an almost rectangular shape
without Faradaic peaks. A galvanostatic charge–discharge investigation has shown the initial specific
capacitance, energy density, and power density are 133 F g�1, 18.3 Wh Kg�1, and 680 W Kg�1,
respectively
Compatible solid polymer electrolyte based on methyl cellulose for energy storage application: structural, electrical, and electrochemical properties
Compatible green polymer electrolytes based on methyl cellulose (MC) were prepared for energy storage electrochemical double-layer capacitor (EDLC) application. X-ray diffraction (XRD) was conducted for structural investigation. The reduction in the intensity of crystalline peaks of MC upon the addition of sodium iodide (NaI) salt discloses the growth of the amorphous area in solid polymer electrolytes (SPEs). Impedance plots show that the uppermost conducting electrolyte had a smaller bulk resistance. The highest attained direct current DC conductivity was 3.01 × 10−3 S/cm for the sample integrated with 50 wt.% of NaI. The dielectric analysis suggests that samples in this study showed non-Debye behavior. The electron transference number was found to be lower than the ion transference number, thus it can be concluded that ions are the primary charge carriers in the MC–NaI system. The addition of a relatively high concentration of salt into the MC matrix changed the ion transfer number from 0.75 to 0.93. From linear sweep voltammetry (LSV), the green polymer electrolyte in this work was actually stable up to 1.7 V. The consequence of the cyclic voltammetry (CV) plot suggests that the nature of charge storage at the electrode–electrolyte interfaces is a non-Faradaic process and specific capacitance is subjective by scan rates. The relatively high capacitance of 94.7 F/g at a sweep rate of 10 mV/s was achieved for EDLC assembly containing a MC–NaI system
Characteristics of a Plasticized PVA-Based Polymer Electrolyte Membrane and H+ Conductor for an Electrical Double-Layer Capacitor: Structural, Morphological, and Ion Transport Properties
A Comprehensive Review on Optical Properties of Polymer Electrolytes and Composites
Polymer electrolytes and composites have prevailed in the high performance and mobile marketplace during recent years. Polymer-based solid electrolytes possess the benefits of low flammability, excellent flexibility, good thermal stability, as well as higher safety. Several researchers have paid attention to the optical properties of polymer electrolytes and their composites. In the present review paper, first, the characteristics, fundamentals, advantages and principles of various types of polymer electrolytes were discussed. Afterward, the characteristics and performance of various polymer hosts on the basis of specific essential and newly published works were described. New developments in various approaches to investigate the optical properties of polymer electrolytes were emphasized. The last part of the review devoted to the optical band gap study using two methods: Tauc’s model and optical dielectric loss parameter. Based on recently published literature sufficient quantum mechanical backgrounds were provided to support the applicability of the optical dielectric loss parameter for the band gap study. In this review paper, it was demonstrated that both Tauc’s model and optical dielectric loss should be studied to specify the type of electron transition and estimate the optical band gap accurately. Other parameters such as absorption coefficient, refractive index and optical dielectric constant were also explored
Bio-Based Plasticized PVA Based Polymer Blend Electrolytes for Energy Storage EDLC Devices: Ion Transport Parameters and Electrochemical Properties
This report shows a simple solution cast methodology to prepare plasticized polyvinyl alcohol (PVA)/methylcellulose (MC)-ammonium iodide (NH4I) electrolyte at room temperature. The maximum conducting membrane has a conductivity of 3.21 × 10−3 S/cm. It is shown that the number density, mobility and diffusion coefficient of ions are enhanced by increasing the glycerol. A number of electric and electrochemical properties of the electrolyte—impedance, dielectric properties, transference numbers, potential window, energy density, specific capacitance (Cs) and power density—were determined. From the determined electric and electrochemical properties, it is shown that PVA: MC-NH4I proton conducting polymer electrolyte (PE) is adequate for utilization in energy storage device (ESD). The decrease of charge transfer resistance with increasing plasticizer was observed from Bode plot. The analysis of dielectric properties has indicated that the plasticizer is a novel approach to increase the number of charge carriers. The electron and ion transference numbers were found. From the linear sweep voltammetry (LSV) response, the breakdown voltage of the electrolyte is determined. From Galvanostatic charge-discharge (GCD) measurement, the calculated Cs values are found to drop with increasing the number of cycles. The increment of internal resistance is shown by equivalent series resistance (ESR) plot. The energy and power density were studied over 250 cycles that results to the value of 5.38–3.59 Wh/kg and 757.58–347.22 W/kg, respectively
Optical Dielectric Loss as a Novel Approach to Specify the Types of Electron Transition: XRD and UV-vis as a Non-Destructive Techniques for Structural and Optical Characterization of PEO Based Nanocomposites
The structure and optical properties of polyethylene oxide (PEO) doped with tin titanate (SnTiO3) nano-filler were studied by X-ray diffraction (XRD) and UV-Vis spectroscopy as non-destructive techniques. PEO-based composed polymer electrolytes inserted with SnTiO3 nano-particles (NPs) were synthesized through the solution cast technique. The change from crystalline phase to amorphous phase of the host polymer was established by the lowering of the intensity and broadening of the crystalline peaks. The optical constants of PEO/SnTiO3 nano-composite (NC), such as, refractive index (n), optical absorption coefficient (α), dielectric loss (εi), as well as dielectric constant (εr) were determined for pure PEO and PEO/SnTiO3 NC. From these findings, the value of n of PEO altered from 2.13 to 2.47 upon the addition of 4 wt.% SnTiO3NPs. The value of εr also increased from 4.5 to 6.3, with addition of 4 wt.% SnTiO3. The fundamental optical absorption edge of the PEO shifted toward lower photon energy upon the addition of the SnTiO3 NPs, confirming a decrement in the optical band gap energy of PEO. The band gap shifted from 4.78 eV to 4.612 eV for PEO-doped with 4 wt.% SnTiO3. The nature of electronic transitions in the pure and the composite material were studied on the basis of Tauc’s model, while optical εi examination was also carried out to calculate the optical band gap
Fabrication of Interconnected Plasmonic Spherical Silver Nanoparticles with Enhanced Localized Surface Plasmon Resonance (LSPR) Peaks Using Quince Leaf Extract Solution
Interconnected spherical metallic silver nanoparticles (Ag NPs) were synthesized in the current study using a green chemistry method. The reduction of silver ions to Ag NPs was carried out with low-cost and eco-friendly quince leaves. For the first time, it was confirmed that the extract solution of quince leaves could be used to perform green production of Ag NPs. Fourier transform infrared spectroscopy (FTIR) was conducted to identify the potential biomolecules that were involved in the Ag NPs. The results depicted that the biosynthesis of Ag NPs through the extract solution of quince leaf was a low-cost, clean, and safe method, which did not make use of any contaminated element and hence, had no undesirable effects. The majority of the peaks in the FTIR spectrum of quince leaf extracts also emerged in the FTIR spectrum of Ag NPs but they were found to be of less severe intensity. The silver ion reduction was elaborated in detail on the basis of the FTIR outcomes. In addition, through X-ray diffraction (XRD) analysis, the Ag NPs were also confirmed to be crystalline in type, owing to the appearance of distinct peaks related to the Ag NPs. The creation of Ag NPs was furthermore confirmed by using absorption spectrum, in which a localized surface plasmon resonance (LSPR) peak at 480 nm was observed. The LSPR peak achieved in the present work was found to be of great interest compared to those reported in literature. Field emission scanning electron microscopy (FESEM) images were used to provide the morphology and grain size of Ag NPs. It was shown from the FESEM images that the Ag NPs had interconnected spherical morphology
The Anodic Behaviour of Bulk Copper in Ethaline and 1-Butyl-3-Methylimidazolium Chloride
The anodic dissolution of bulk metallic copper was conducted in ionic liquids (ILs)-a deep eutectic solvent (DES) ((CH3)3NC2H4OH) comprised of a 1:2 molar ratio mixture of choline chloride Cl (ChCl), and ethylene glycol (EG)-and imidazolium-based ILs, such as C4mimCl, using electrochemical techniques, such as cyclic voltammetry, anodic linear sweep voltammetry, and chronopotentiometry.To investigate the electrochemical dissolution mechanism, electrochemical impedance spectroscopy (EIS) was used. In addition to spectroscopic techniques, for instance, UV-visible spectroscopy, microscopic techniques, such as atomic force microscopy (AFM), were used. The significant industrial importance of metallic copper has motivated several research groups to deal with such an invaluable metal. It was confirmed that the speciation of dissolved copper from the bulk phase at the interface region is [CuCl3]- and [CuCl4]2- in such chloride-rich media, and the EG determine the structure of the interfacial region in the electrochemical dissolution process. A super-saturated solution was produced at the electrode/solution interface and CuCl2 was deposited on the metal surface. © 2019 by the authors