2,852 research outputs found
Angular distributions of γ rays from the 7Li(p,γ) reaction at low energies
Angular distributions of the 14–17 MeV γ rays from the 7Li(p,γ) reaction at Ep=450, 402, and 80 keV were measured at 0°≤θlab≤135°, using a BGO detector and a 28-μg/cm2 LiF target. The angular distributions at Ep=450 and 402 keV agree with the previous results by Mainsbridge; at Ep=80 keV the ground-state transition is anisotropic on the order of 20%, confirming recent results by Chasteler et al
Reliability-Based Design of Thermal Protection Systems with Support Vector Machines
The primary objective of this work was to develop a computationally efficient and accurate approach to reliability analysis of thermal protection systems using support vector machines. An adaptive sampling approach was introduced informs a iterative support vector machine approximation of the limit state function used for measuring reliability. The proposed sampling approach efficient adds samples along the limit state function until the reliability approximation is converged. This methodology is applied to two samples, mathematical functions to test and demonstrate the applicability. Then, the adaptive sampling-based support vector machine approach is applied to the reliability analysis of a thermal protection system. The results of all three problems highlight the potential capability of the new approach in terms of accuracy and computational saving in determining thermal protection system reliability
Calibration Probe Uncertainty and Validation for the Hypersonic Material Environmental Test System
This paper presents an uncertainty analysis of the stagnation-point calibration probe surface predictions for conditions that span the performance envelope of the Hypersonic Materials Environmental Test System facility located at NASA Langley Research Center. A second-order stochastic expansion was constructed over 47 uncertain parameters to evaluate the sensitivities, identify the most significant uncertain variables, and quantify the uncertainty in the stagnation-point heat flux and pressure predictions of the calibration probe for a low- and high-enthalpy test condition. A sensitivity analysis showed that measurement bias uncertainty is the most significant contributor to the stagnation-point pressure and heat flux variance for the low-enthalpy condition. For the high-enthalpy condition, a paradigm shift in sensitivities revealed the computational fluid dynamics model input uncertainty as the main contributor. A comparison between the prediction and measurement of the stagnation-point conditions under uncertainty showed that there was evidence of statistical disagreement. A validation metric was proposed and applied to the prediction uncertainty to account for the statistical disagreement when compared to the possible stagnation-point heat flux and pressure measurements
Self-assembly of iron nanoclusters on the Fe3O4(111) superstructured surface
We report on the self-organized growth of a regular array of Fe nanoclusters
on a nanopatterned magnetite surface. Under oxidizing preparation conditions
the (111) surface of magnetite exhibits a regular superstructure with
three-fold symmetry and a 42 A periodicity. This superstructure represents an
oxygen terminated (111) surface, which is reconstructed to form a periodically
strained surface. This strain patterned surface has been used as a template for
the growth of an ultrathin metal film. A Fe film of 0.5 A thickness was
deposited on the substrate at room temperature. Fe nanoclusters are formed on
top of the surface superstructure creating a regular array with the period of
the superstructure. We also demonstrate that at least the initial stage of Fe
growth occurs in two-dimensional mode. In the areas of the surface where the
strain pattern is not formed, random nucleation of Fe was observed.Comment: 6 pages, 3 figure
Ag-coverage-dependent symmetry of the electronic states of the Pt(111)-Ag-Bi interface: The ARPES view of a structural transition
We studied by angle-resolved photoelectron spectroscopy the strain-related
structural transition from a pseudomorphic monolayer (ML) to a striped
incommensurate phase in an Ag thin film grown on Pt(111). We exploited the
surfactant properties of Bi to grow ordered Pt(111)-xMLAg-Bi trilayers with 0 <
x < 5 ML, and monitored the dispersion of the Bi-derived interface states to
probe the structure of the underlying Ag film. We find that their symmetry
changes from threefold to sixfold and back to threefold in the Ag coverage
range studied. Together with previous scanning tunneling microscopy and
photoelectron diffraction data, these results provide a consistent microscopic
description of the coverage-dependent structural transition.Comment: 10 pages, 9 figure
Test of quantum nonlocality for cavity fields
There have been studies on formation of quantum-nonlocal states in spatially
separate two cavities. We suggest a nonlocal test for the field prepared in the
two cavities. We couple classical driving fields with the cavities where a
nonlocal state is prepared. Two independent two-level atoms are then sent
through respective cavities to interact off-resonantly with the cavity fields.
The atomic states are measured after the interaction. Bell's inequality can be
tested by the joint probabilities of two-level atoms being in their excited or
ground states. We find that quantum nonlocality can also be tested using a
single atom sequentially interacting with the two cavities. Potential
experimental errors are also considered. We show that with the present
experimental condition of 5% error in the atomic velocity distribution, the
violation of Bell's inequality can be measured.Comment: 14pages, 2figures. accepted to Phys. Rev.
Complications After Laparoscopic and Conventional Cholecystectomy: A Comparative Study
The growing popularity of laparoscopic cholecystectomy (LC) has made extensive series
comparing laparoscopic and conventional cholecystectomy in a prospective, randomized way
nearly impossible. To evaluate LC we compared retrospectively 800 laparoscopic with 748
conventional cholecystectomies (CC). Of the 800 LC, 10 (1.2%) were converted to laparotomy.
6 conversions were related to aberrant anatomical features or features making dissection very
difficult, 4 conversions were due to complications. There were 5 (0, 6%) intraoperative complications
during LC and 4 (0.5%) during CC. Postoperative morbidity was 2.1% (n = 17) after LC
and 3.7% (n = 28) after CC. Particularly the incidence of wound problems was only 0.5% (n = 4)
after LC while it was 1.3% (n = 10) after CC. Overall morbidity was 2.7% (n = 22) for LC and
4.2% (n = 32) for CC. Mortality rate after CC was 0.4% (n = 3), there were no deaths after LC.
Common bile duct-injury rate was 0.2% (n = 2) for both groups. Complication rates after LC
have been rapidly decreasing with growing experience. Laparoscopic cholecystectomy can safely
be performed by appropriately trained surgeons in more than 90% of patients suffering from
gallbladder disease. The low morbidity and mortality together with the significant advantages to
patient recovery makes laparoscopic cholecystectomy the treatment of choice for symptomatic
cholecystolithiasis
In situ observations of ClO in the Antarctic: Evidence for chlorine catalyzed destruction of ozone
Results from a series of 12 ER-2 aircraft flights into the Antarctic polar vortex are summarized. These in situ data define the spatial and temporal distribution of ClO as the aircraft flew at an altitude of approx. 18 km from Punta Arenas (54 deg S latitude) to the base of the Palmer Peninsula (72 deg S latitude), executed a rapid descent to approx. 13 km, turned north and climbed bach to approximately 18 km, returning to Punta Arenas. A general pattern in the ClO distribution is reported: mixing ratios of approximately 10 ppt are found at altitude in the vicinity of 55 deg S increasing to 50 ppt at 60 degrees S. In the vicinity of 65 deg S latitude a steep gradient in the ClO mixing ratio is observed. At a fixed potential temperature, the ClO mixing ratio through this sharp transition increases by an order of magnitude within a very few degrees of latitude, thus defining the edge of the chemical containment vessel. From the edge of that containment vessel to the southern extension of the flights, 72 deg S, a dome of slowly increasing ClO best describes the distribution. Conclusion are drawn from the data
Quality, Stability, and Safety Data of Packed Red Cells and Plasma Processed by Gravity Separation Using a New Fully Integrated Hollow-Fibre Filter Device
Background. We developed a completely closed system based on gravity separation without centrifugation steps for separation of whole blood. With this new system we compared quality and stability of the processed blood components (PRC and plasma) with respect to classical preparation. Furthermore the cost-effectiveness of this hollow fibre system was evaluated. Study Design and Methods. Whole blood collections of 15 regular blood donors were used for component preparation using the U shaped hollow fibre filter device. Results were compared to 15 whole blood preparations using centrifugation. The following parameters were evaluated: total hemoglobin, leukocyte counts, the serum concentration of total protein, lactate dehydrogenase (LDH) and potassium. Furthermore ATIII, vWF and F VIII were analyzed at different timepoints. Results. packed red cells: the data directly after separation and after 42 days of storage are in line with the guidelines of the council of Europe. Plasma. all plasma quality data are in line with the guidelines of the council of Europe for quality assurance of plasma, except for a low protein amount (factor 0.75). Conclusion. Separation of whole blood on a clinical scale in this new closed system is feasible, however the plasma protein content must be optimized
- …