118 research outputs found

    Thermal design issues and performance of microcalorimeter arrays at sub-Kelvin temperatures

    Get PDF
    We have produced 5/spl times/5 pixel arrays of microcalorimeters using bulk micromachining. Analysis of our data provides the thermal conductivity parameters of Si/sub x/N/sub y/ 1 /spl mu/m thick membranes at 100 mK. Moreover we find that the thermal transport at 100 mK in Si beams, with dimensions 1.25 mm /spl times/ 0.35mm /spl times/ 35/spl mu/m (length /spl times/ height /spl times/ width) is dominated by ballistic phonons with a mean free path of 110 /spl mu/m. These thermal parameters can be used for modelling future 32 /spl times/ 32 pixel arrays. In addition we operated three pixels in a 5 /spl times/ 5 array of microcalorimeters and find that the pixel to pixel reproducibility is very good. When used as an X-ray microcalorimeter individual pixels have a thermal decay time of 200 /spl mu/s is and their energy resolution is between 6 and 7 eV for 5.89 keV X-ray photons

    X-ray response of tunnel junctions with a trapping layer

    Get PDF
    The use of trapping layers in superconductive tunnel junctions may drastically improve their functioning as X-ray detectors. Information about these trapping layers can be obtained from I/V-curves and X-ray spectra. The application of a magnetic field causes a substantial reduction of the bandgap in the trapping layer

    High-Tc bolometers with silicon-nitride spiderwebsuspension for far-infrared detection

    Get PDF
    High-Tc GdBa2Cu3O7-δ (GBCO) superconducting transition edge bolometers with operating temperatures near 90 K have been made with both closed silicon-nitride membranes and patterned silicon-nitride (SiN) spiderweb-like suspension structures. As a substrate silicon-on-nitride (SON) wafers are used which are made by fusion bonding of a silicon wafer to a silicon wafer with a silicon-nitride top layer. The resulting monocrystalline silicon top layer on the silicon-nitride membranes enables the epitaxial growth of GBCO. By patterning the silicon-nitride the thermal conductance G is reduced from about 20 to 3 μW/K. The noise of both types of bolometers is dominated by the intrinsic noise from phonon fluctuations in the thermal conductance G. The optical efficiency in the far infrared is about 75% due to a goldblack absorption layer. The noise equivalent power NEP for FIR detection is 1.8 pW/√Hz, and the detectivity D* is 5.4×1010 cm √Hz/W. Time constants are 0.1 and 0.6 s, for the closed membrane and the spiderweb like bolometers respectively. The effective time constant can be reduced with about a factor 3 by using voltage bias. Further reduction necessarily results in an increase of the NEP due to the 1/f noise of the superconductor

    Radiative ballistic phonon transport in silicon-nitride membranes at low temperatures

    Get PDF
    We studied the phonon transport in free-standing 1 µm thick silicon-nitride membranes at temperatures around 100 mK. By varying the geometry of the membranes and the dimensions of the heater element, we are able to distinguish between radiative and diffuse phonon transport. The data indicate that the transport is radiative ballistic with a lower limit to a phonon mean-free path of about 1 mm and that the probability for specular reflection from the surface is at least 0.99. The tested silicon-nitride membranes were grown on Si(100), Si(110), and polycrystalline-Si and the transport properties show no dependency on the substrat

    Low noise far-infrared detection at 90 K using high-T(c) superconducting bolometers with silicon-nitride beam suspension

    Get PDF
    High-T(c) GdBa2Cu3O7-d (GBCO) superconducting transition edge bolometers with operating temperatures near 90 K and receiving area of 1 mm2 have been made with both closed silicon-nitride membranes and patterned silicon-nitride (Si(x)N(y)) spiderweb-like suspension structures. To enable epitaxial growth of the GBCO layer, a thin monocrystalline Si layer is prepared on the silicon-nitride base, using fusion bonding techniques. By pattering the silicon-nitride supporting membrane the thermal conductance G is reduced from 20 to 3.5 μW/K. The noise of both types of bolometers is fully dominated by the intrinsic noise from phonon fluctuations in the thermal conductance G. The optical efficiency in the far infrared is about 75% due to a gold black absorption layer. The optical noise equivalent power (NEP) is 1.8 pW/√Hz, and the detectivity D* is 5.4x1010 cm√Hz/W. Time constants are 0.1 and 0.6 s, for the closed membrane and the spiderweb like bolometers respectively. We have observed an empirical limit for the NEP for this type of bolometers. The effective timeconstant can be reduced with a factor of 3 by using an electronic feedback system or by using voltage bias. A further reduction necessarily results in an increase of the NEP due to the 1/f noise of the superconductor

    Phase I and pharmacokinetic study of DE-310 in patients with advanced solid tumors

    Get PDF
    PURPOSE: To assess the maximum-tolerated dose, toxicity, and pharmacokinetics of DE-310, a macromolecular prodrug of the topoisomerase I inhibitor exatecan (DX-8951f). in patients with advanced solid tumors. EXPERIMENTAL DESIGN: Patients received DE-310 as a 3-hour infusion once every 2 weeks (dose, 1.0-2.0 mg/m(2)) or once every 6 weeks (dose, 6.0-9.0 mg/m(2)). Because pharmacokinetics revealed a drug terminal half-life exceeding the 2 weeks administration interval, the protocol was amended to a 6-week interval between administrations also based on available information from a parallel trial using an every 4 weeks schedule. Conjugated DX-8951 (the carrier-linked molecule), and the metabolites DX-8951 and glycyl-DX-8951 were assayed in various matrices up to 35 days post first and second dose. RESULTS: Twenty-seven patients were enrolled into the study and received a total of 86 administrations. Neutropenia and grade 3 thrombocytopenia, and grade 3 hepatotoxicity with veno-occlusive disease, were dose-limiting toxicities. Other hematologic and nonhematologic toxicities were mild to moderate and reversible. The apparent half-life of conjugated DX-8951, glycyl-DX-8951, and DX-8951 was 13 days. The area under the curve ratio for conjugated DX-8951 to DX-8951 was 600. No drug concentration was detectable in erythrocytes, skin, and saliva, although low levels of glycyl-DX-8951 and DX-8951 were detectable in tumor biopsies. One patient with metastatic adenocarcinoma of unknown primary achieved a histologically proven complete remission. One confirmed partial remission was observed in a patient with metastatic pancreatic cancer and disease stabilization was noted in 14 additional patients. CONCLUSIONS: The recommended phase II dose of DE-310 is 7.5 mg/m(2) given once every 6 weeks. The active moiety DX-8951 is released slowly from DE-310 and over an extended period, achieving the desired prolonged exposure to this topoisomerase I inhibitor

    Treatment of posttraumatic stress disorder following childbirth

    Get PDF
    Aim: The aim of this systematic review is to give an overview of the literature on treatment options for posttraumatic stress disorder (PTSD) following childbirth and to assess their efficacy. Method: PubMed, Embase, Web of Science, Cochrane and PsycINFO were searched using “PTSD”, “childbirth” and “therapy” as terms for studies in English language published between 2000 and 2017. Additional studies were identified by checking reference lists. Studies were included when presence of PTSD was confirmed prior to treatment and childbirth was the traumatic event focused on. All studies were reviewed on sample size, study design, used instruments, sample characteristics, type of treatment and the result of treatment regarding PTSD (symptoms). Results: Six studies met the inclusion criteria. One study on debriefing, three studies on cognitive behavioral therapy (CBT) and two studies on eye movement desensitization and reprocessing (EMDR) were identified. Both EMDR and CBT appear to be promising therapies for PTSD following childbirth. Debriefing seems to be beneficial when women request it themselves. Conclusions: EMDR and CBT seem to be effective as therapy for PTSD following childbirth. However, evidence is still lim
    corecore