q-Newton binomial: from Euler to Gauss

A counter-intuitive result of Gauss (formulae (1.6), (1.7) below) is made less mysterious by virtue of being generalized through the introduction of an additional parameter

SOLID STATE HYDRIDE SYSTEM ENGINEERING

A typical hydrogen refueling station was designed based on DOE targets and existing gasoline filling station operations. The purpose of this design was to determine typical heat loads, how these heat loads will be handled, and approximate equipment sizes. For the station model, two DOE targets that had the most impact on the design were vehicle driving range and refueling time. The target that hydrogen fueled vehicles should have the equivalent driving range as present automobiles, requires 5 kg hydrogen storage. Assuming refueling occurs when the tank is 80% empty yields a refueling quantity of 4 kg. The DOE target for 2010 of a refueling time of 3 minutes was used in this design. There is additional time needed for payment of the fuel, and connecting and disconnecting hoses and grounds. It was assumed that this could be accomplished in 5 minutes. Using 8 minutes for each vehicle refueling gives a maximum hourly refueling rate of 7.5 cars per hour per fueling point

EVALUATION OF THERMAL CONDUCTIVITY OF INSTALLED-IN-PLACE POLYURETHANE FOAM INSULATION BY EXPERIMENT AND ANALYSIS

In the thermal analysis of the 9977 package, it was found that calculated temperatures, determined using a typical thermal analysis code, did not match those measured in the experimental apparatus. The analysis indicated that the thermal resistance of the overpack in the experimental apparatus was less than that expected, based on manufacturer's reported value of thermal conductivity. To resolve this question, the thermal conductivity of the installed foam was evaluated from the experimental results, using a simplified analysis. This study confirmed that the thermal resistance of the experimental apparatus was lower than that which would result from the manufacturer's published values for thermal conductivity of the foam insulation. The test package was sectioned to obtain samples for measurement of material properties. In the course of the destructive examination a large uninsulated region was found at the bottom of the package, which accounted for the anomalous results. Subsequent measurement of thermal conductivity confirmed the manufacturer's published values. The study provides useful insight into the use of simplified, scoping calculations for evaluation of thermal performance of packages

JWST mirror and actuator performance at cryo-vacuum

The James Webb Space Telescope (JWST) telescope’s Secondary Mirror Assembly (SMA) and eighteen Primary Mirror Segment Assemblies (PMSAs) are each actively controlled in rigid body position via six hexapod actuators. Each of the PMSAs additionally has a radius of curvature actuator. The mirrors are stowed to the mirror support structure to survive the launch environment and then must be deployed 12.5 mm to reach the nominally deployed position before the Wavefront Sensing & Control (WFSC) alignment and phasing process begins. JWST requires testing of the full optical system in a Cryogenic Vacuum (CV) environment before launch. The cryo vacuum test campaign was executed in Chamber A at the Johnson Space Center (JSC) in Houston Texas. The test campaign consisted of an ambient vacuum test, a cooldown test, a cryo stable test at 65 Kelvin, a warmup test, and finally a second ambient vacuum test. Part of that test campaign was the functional and performance testing of the hexapod actuators on the flight mirrors. This paper will describe the testing that was performed on all 132 hexapod and radius of curvature actuators. The test campaign first tests actuators individually then tested how the actuators perform in the hexapod system. Telemetry from flight sensors on the actuators and measurements from external metrology devices such as interferometers, photogrammetry systems and image analysis was used to demonstrate the performance of the JWST actuators. The mirror move commanding process was exercised extensively during the JSC CV test and many examples of accurately commanded moves occurred. The PMSA and SMA actuators performed extremely well during the JSC CV test, and we have demonstrated that the actuators are fully functional both at ambient and cryo temperatures and that the mirrors will go to their commanded positions with the accuracy needed to phase and align the telescope

Simulating Three-Dimensional Hydrodynamics on a Cellular-Automata Machine

We demonstrate how three-dimensional fluid flow simulations can be carried out on the Cellular Automata Machine 8 (CAM-8), a special-purpose computer for cellular-automata computations. The principal algorithmic innovation is the use of a lattice-gas model with a 16-bit collision operator that is specially adapted to the machine architecture. It is shown how the collision rules can be optimized to obtain a low viscosity of the fluid. Predictions of the viscosity based on a Boltzmann approximation agree well with measurements of the viscosity made on CAM-8. Several test simulations of flows in simple geometries -- channels, pipes, and a cubic array of spheres -- are carried out. Measurements of average flux in these geometries compare well with theoretical predictions.Comment: 19 pages, REVTeX and epsf macros require

Age, gender and disability predict future disability in older people: the Rotterdam Study

<p>Abstract</p> <p>Background</p> <p>To develop a prediction model that predicts disability in community-dwelling older people. Insight in the predictors of disability is needed to target preventive strategies for people at increased risk.</p> <p>Methods</p> <p>Data were obtained from the Rotterdam Study, including subjects of 55 years and over. Subjects who had complete data for sociodemographic factors, life style variables, health conditions, disability status at baseline and complete data for disability at follow-up were included in the analysis. Disability was expressed as a Disability Index (DI) measured with the Health Assessment Questionnaire.</p> <p>We used a multivariable polytomous logistic regression to derive a basic prediction model and an extended prediction model. Finally we developed readily applicable score charts for the calculation of outcome probabilities.</p> <p>Results</p> <p>Of the 5027 subjects included, 49% had no disability, 18% had mild disability, 16% had severe disability and 18% had deceased at follow-up after six years. The strongest predictors were age and prior disability. The contribution of other predictors was relatively small. The discriminative ability of the basic model was high; the extended model did not enhance predictive ability.</p> <p>Conclusion</p> <p>As prior disability status predicts future disability status, interventive strategies should be aimed at preventing disability in the first place.</p

The Effect of the Earned Income Tax Credit in the District of Columbia on Poverty and Income Dynamics

Using unique longitudinal administrative tax panel data for the District of Columbia (DC), we assess the combined effect of the DC supplemental earned income tax credit (EITC) and the federal EITC on poverty and income dynamics within Washington, DC, from 2001 to 2011. The EITC in DC merits investigation, as the DC supplement to the federal credit is the largest in the nation. The supplemental DC EITC was enacted in 2000, and has been expanded from 10 percent of the federal credit in 2001 to 40 percent as of 2009. To implement the study, we estimate least squares models with 0/1 dependent variables to estimate the likelihood of net-EITC income above poverty and near-poverty thresholds. We also estimate the likelihood of earnings growth and income stabilization from the EITC. To identify the effect of the EITC, we exploit variation in the EITC subsidy rate from 2008 to 2009, when an additional EITC bracket of 45 percent was added for workers with three or more dependent children, up from 40 percent in the previous year for workers with two or more children. We also estimate a model examining the impact of city-level changes to the EITC. The structure and richness of our data enable us to control for tax filer fixed effects, an important innovation from many previous EITC studies. Overall, we find that the combined EITC raises the likelihood of net-EITC income above poverty and near poverty by as much as 9 percent, with the largest consistent effects accruing to single-parent families

Neanderthal Use of Fish, Mammals, Birds, Starchy Plants and Wood 125-250,000 Years Ago

Neanderthals are most often portrayed as big game hunters who derived the vast majority of their diet from large terrestrial herbivores while birds, fish and plants are seen as relatively unimportant or beyond the capabilities of Neanderthals. Although evidence for exploitation of other resources (small mammals, birds, fish, shellfish, and plants) has been found at certain Neanderthal sites, these are typically dismissed as unusual exceptions. The general view suggests that Neanderthal diet may broaden with time, but that this only occurs sometime after 50,000 years ago. We present evidence, in the form of lithic residue and use-wear analyses, for an example of a broad-based subsistence for Neanderthals at the site of Payre, Ardèche, France (beginning of MIS 5/end of MIS 6 to beginning of MIS 7/end of MIS 8; approximately 125–250,000 years ago). In addition to large terrestrial herbivores, Neanderthals at Payre also exploited starchy plants, birds, and fish. These results demonstrate a varied subsistence already in place with early Neanderthals and suggest that our ideas of Neanderthal subsistence are biased by our dependence on the zooarchaeological record and a deep-seated intellectual emphasis on big game hunting

JWST mirror and actuator performance at cryo-vacuum

The James Webb Space Telescope (JWST) telescope’s Secondary Mirror Assembly (SMA) and eighteen Primary Mirror Segment Assemblies (PMSAs) are each actively controlled in rigid body position via six hexapod actuators. Each of the PMSAs additionally has a radius of curvature actuator. The mirrors are stowed to the mirror support structure to survive the launch environment and then must be deployed 12.5 mm to reach the nominally deployed position before the Wavefront Sensing & Control (WFSC) alignment and phasing process begins. JWST requires testing of the full optical system in a Cryogenic Vacuum (CV) environment before launch. The cryo vacuum test campaign was executed in Chamber A at the Johnson Space Center (JSC) in Houston Texas. The test campaign consisted of an ambient vacuum test, a cooldown test, a cryo stable test at 65 Kelvin, a warmup test, and finally a second ambient vacuum test. Part of that test campaign was the functional and performance testing of the hexapod actuators on the flight mirrors. This paper will describe the testing that was performed on all 132 hexapod and radius of curvature actuators. The test campaign first tests actuators individually then tested how the actuators perform in the hexapod system. Telemetry from flight sensors on the actuators and measurements from external metrology devices such as interferometers, photogrammetry systems and image analysis was used to demonstrate the performance of the JWST actuators. The mirror move commanding process was exercised extensively during the JSC CV test and many examples of accurately commanded moves occurred. The PMSA and SMA actuators performed extremely well during the JSC CV test, and we have demonstrated that the actuators are fully functional both at ambient and cryo temperatures and that the mirrors will go to their commanded positions with the accuracy needed to phase and align the telescope

Midgut Barrier Imparts Selective Resistance to Filarial Worm Infection in Culex pipiens pipiens

Mosquitoes in the Culex pipiens complex thrive in temperate and tropical regions worldwide, and serve as efficient vectors of Bancroftian lymphatic filariasis (LF) caused by Wuchereria bancrofti in Asia, Africa, the West Indies, South America, and Micronesia. However, members of this mosquito complex do not act as natural vectors for Brugian LF caused by Brugia malayi, or for the cat parasite B. pahangi, despite their presence in South Asia where these parasites are endemic. Previous work with the Iowa strain of Culex pipiens pipiens demonstrates that it is equally susceptible to W. bancrofti as is the natural Cx. p. pipiens vector in the Nile Delta, however it is refractory to infection with Brugia spp. Here we report that the infectivity barrier for Brugia spp. in Cx. p. pipiens is the mosquito midgut, which inflicts internal and lethal damage to ingested microfilariae. Following per os Brugia exposures, the prevalence of infection is significantly lower in Cx. p. pipiens compared to susceptible mosquito controls, and differs between parasite species with <50% and <5% of Cx. p. pipiens becoming infected with B. pahangi and B. malayi, respectively. When Brugia spp. mf were inoculated intrathoracically to bypass the midgut, larvae developed equally well as in controls, indicating that, beyond the midgut, Cx. p. pipiens is physiologically compatible with Brugia spp. Mf isolated from Cx. p. pipiens midguts exhibited compromised motility, and unlike mf derived from blood or isolated from the midguts of Ae. aegypti, failed to develop when inoculated intrathoracically into susceptible mosquitoes. Together these data strongly support the role of the midgut as the primary infection barrier for Brugia spp. in Cx. p. pipiens. Examination of parasites recovered from the Cx. p. pipiens midgut by vital staining, and those exsheathed with papain, suggest that the damage inflicted by the midgut is subcuticular and disrupts internal tissues. Microscopic studies of these worms reveal compromised motility and sharp bends in the body; and ultrastructurally the presence of many fluid or carbohydrate-filled vacuoles in the hypodermis, body wall, and nuclear column. Incubation of Brugia mf with Cx. p. pipiens midgut extracts produces similar internal damage phenotypes; indicating that the Cx. p. pipiens midgut factor(s) that damage mf in vivo are soluble and stable in physiological buffer, and inflict damage on mf in vitro