1,930 research outputs found
Oscillation Effects and Time Variation of the Supernova Neutrino Signal
The neutrinos detected from the next Galactic core-collapse supernova will
contain valuable information on the internal dynamics of the explosion. One
mechanism leading to a temporal evolution of the neutrino signal is the
variation of the induced neutrino flavor mixing driven by changes in the
density profile. With one and two dimensional hydrodynamical simulations we
identify the behavior and properties of prominent features of the explosion.
Using these results we demonstrate the time variation of the neutrino crossing
probabilities due to changes in the MSW neutrino transformations as the star
explodes by using the S-matrix - Monte Carlo - approach to neutrino
propagation. After adopting spectra for the neutrinos emitted from the
proto-neutron star we calculate for a Galactic supernova the evolution of the
positron spectra within a water Cerenkov detector and the ratio of charged
current to neutral current event rates for a heavy water - SNO like - detector
and find that these detector signals are feasible probes of a number of
explosion features
DIAL with heterodyne detection including speckle noise: Aircraft/shuttle measurements of O3, H2O, and NH3 with pulsed tunable CO2lasers
A parametric analysis of DIAL sensitivity with heterodyne detection is presented and comparisons with direct detection are discussed. Examples are given for monitoring vertical distributions of O3, H2O, and NH3 using a ground-, aircraft-, or shuttle-based pulsed tunable CO2 laser DIAL system. Results indicate that maximum sensitivity at minimum laser energy per measurement requires multiple pulse operation with the energy per pulse selected so that the measured photon rate is approximately equal to the detector IF bandwidth. Measurement sensitivities can be maximized and interference effects minimized by fine adjustment of measurement frequencies using the tunability of high pressure lasers. The use of rare isotope lasers minimizes loss due to CO2 atmospheric absorption
DIAL with heterodyne detection including speckle noise: Aircraft/shuttle measurements of O3, H2O, and NH3 with pulsed tunable CO2 lasers
Atmospheric trace constituent measurements with higher vertical resolution than attainable with passive radiometers are discussed. Infrared differential absorption lidar (DIAL), which depends on Mie scattering from aerosols, has special advantages for tropospheric and lower stratospheric applications and has great potential importance for measurements from shuttle and aircraft. Differential absorption lidar data reduction involves comparing large amplitude signals which have small differences. The accuracy of the trace constituent concentration inferred from DIAL measurements depends strongly on the errors in determining the amplitude of the signals. Thus, the commonly used SNR expression (signal divided by noise in the absence of signal) is not adequate to describe DIAL measurement accuracy and must be replaced by an expression which includes the random coherent (speckle) noise within the signal. A comprehensive DIAL computer algorithm is modified to include heterodyne detection and speckle noise. Examples for monitoring vertical distributions of O3, H2O, and NH3 using a ground-, aircraft-, or shuttle-based pulsed tunable CO2 laser DIAL system are given
Study of instabilities and transition to turbulence in a linear hall accelerator
Magnetospheric instabilities and transition to plasma turbulence in Hall current accelerator
Autonomous space processor for orbital debris
This work continues to develop advanced designs toward the ultimate goal of a GETAWAY SPECIAL to demonstrate economical removal of orbital debris utilizing local resources in orbit. The fundamental technical feasibility was demonstrated last year through theoretical calculations, quantitative computer animation, a solar focal point cutter, a robotic arm design and a subscale model. During this reporting period, several improvements are made in the solar cutter, such as auto track capabilities, better quality reflectors and a more versatile framework. The major advance has been in the design, fabrication and working demonstration of a ROBOTIC ARM that has several degrees of freedom. The functions were specifically tailored for the orbital debris handling. These advances are discussed here. Also a small fraction of the resources were allocated towards research in flame augmentation in SCRAMJETS for the NASP. Here, the fundamental advance was the attainment of Mach numbers up to 0.6 in the flame zone and a vastly improved injection system; the current work is expected to achieve supersonic combustion in the laboratory and an advanced monitoring system
Development of flashlamp-pumped Q-switched Ho:Tm:Cr:YAG lasers for mid-infrared LIDAR application
A flashlamp-pumped 2.1 micron Ho:Tm:Cr:YAG laser was studied for both normal mode and Q-switched operations under a wide variety of experimental conditions in order to optimize performance. Laser output energy, slope efficiency, threshold and pulselength were determined as a function of operating temperature, output mirror reflectivity, input electrical energy and Q-switch opening time. The measured normal-mode laser thresholds of a Ho(3+) (0.45 atomic percent):Tm(3+) (2.5 atomic percent):Cr(3+) (0.8 atomic percent):YAG crystal ranged form 26 to 50 J between 120 and 200 K with slope efficiencies up to 0.36 percent with a 60 percent reflective output mirror. Under Q-switched operation the slope efficiency was 90 percent of the normal-mode result. Development of solid state lasers with Ho(3+), Tm(3+) and/or Er(3+) doped crystals has been pursued by NASA for eye-dafe mid-infrared LIDAR (light detection and ranging) application. As a part of the project, the authors have been working on evaluating Ho(3+):Tm(3+):Cr(3+):YAG crystals for normal-mode and Q-switched 2.1 micron laser operations in order to determine an optimum Tm(3+) concentration under flashlamp pumping conditions. Lasing properties of the Ho(3+) in the mid-infrared region have been studied by many research groups since the early 1960's. However, the technology of those lasers is still premature for lidar application. In order to overcome the inefficiency related to narrow absorption bands of the Ho(3+), Tm(3+) and Er(3+), the erbium has been replaced by chromium. The improvement in flashlamp-pumped Ho(3+) laser efficiency has been demonstrated recently by several research groups by utilizing the broad absorption spectrum of Cr(3+) which covers the flashlamp's emission spectrum. Efficient energy transfer to the Tm(3+) and then the Ho(3+) occurs subsequently. It is known that high Tm(3+) concentration and low Ho(3+) concentration are preferred to achieve a quantum efficiency approaching two and to avoid large reabsorption losses. However, determination of the optimum Tm(3+) concentration required to ensure efficient energy transfer from Cr(3+) to Tm(3+) and from Tm(3+) to Ho(3+) has not been made in the Ho:Tm:CR:YAG crystal. The results obtained so far are given
HLA-Associated viral mutations are common in human immunodeficiency virus type 1 elite controllers
Elite controllers (EC) of human immunodeficiency virus type 1 (HTV-1) maintain viremia below the limit of detection without antiretroviral treatment. Virus-specific cytotoxic CD8+ T lymphocytes are believed to play a crucial role in viral containment, but the degree of immune imprinting and compensatory mutations in EC is unclear. We obtained plasma gag, pol, and nef sequences from HLA-diverse subjects and found that 30 to 40% of the predefined HLA-associated polymorphic sites show evidence of immune selection pressure in EC., compared to approximately 50% of the sites in chronic progressors. These data indicate ongoing viral replication and escape from cytotoxic T lymphocytes are present even in strictly controlled HTV-1 infection
Surgical valvulotomy for tricuspid valve stenosis in a dog
A 2 year 4 month old female neutered Labrador retriever was presented for evaluation right sided congestive heart failure. Echocardiographic examination revealed tricuspid valve dysplasia with only two small orifices in the valve resulting in severe tricuspid stenosis. The dog underwent a right fifth lateral intercostal thoracotomy and surgical tricuspid valvulotomy, under cardiopulmonary bypass. The stenosis was relieved by dividing the valve leaflets between the two orifices with continuation to the commissures, creating a ‘bi-leaflet’ valve. The dog made a good recovery initially with echocardiography at 48 hours after surgery showing a reduction in tricuspid valve E and A wave velocities and pressure half time (from 230 ms to to 65 ms). She was discharged five days after surgery with spironolactone, benazepril, pimobendan and clopidogrel. The dog was re-presented two days later having collapsed, with pyrexia, facial swelling and pitting edema on the ventral neck and intermandibular region. Investigations did not reveal an underlying cause and the clinical signs resolved with supportive therapy. Two years after surgery the dog was free of clinical signs with normal exercise tolerance and only mild tricuspid regurgitation on echocardiography, with discontinuation of all medications
- …