6 research outputs found
Dataset for SERS plasmonic array: Width, spacing, and thin film oxide thickness optimization
Surface-enhanced Raman spectroscopy (SERS) improves the scope and power of Raman spectroscopy by taking advantage of plasmonic nanostructures, which have the potential to enhance Raman signal strength by several orders of magnitude, which can allow for the detection of analyte molecules. The dataset presented provides results of a computational study that used a finite element method (FEM) to model gold nanowires on a silicon dioxide substrate. The survey calculated the surface average of optical surface enhancement due to plasmonic effects across the entire model and studied various geometric parameters regarding the width of the nanowires, spacing between the nanowires, and thickness of the silicon dioxide substrate. From this data, enhancement values were found to have a periodicity due to the thickness of the silicon dioxide. Additionally, strong plasmonic enhancement for smaller distances between nanowires were found, as expected; however, additional surface enhancement at greater gap distances were observed, which were not anticipated, possibly due to resonance with periodic dimensions and the frequency of the light. This data presentation will benefit future SERS studies by probing further into the computational and mathematical material presented previously
Recommended from our members
Subradiant plasmonic cavities make bright polariton states dark
Abstract:
Nanostructured plasmonic surfaces allow for precise tailoring of electromagnetic modes within sub-diffraction mode volumes, boosting light–matter interactions. This study explores vibrational strong coupling (VSC) between molecular ensembles and subradiant “dark” cavities that support infrared quadrupolar plasmonic resonances (QPLs). The QPL mode exhibits a dispersion characteristic of bound states in the continuum (BIC). That is, the mode is subradiant or evanescent at normal incidence and acquires increasing “bright” dipole character with larger in-plane wavevectors. We deposited polymethyl methacrylate (PMMA) thin films on QPL substrates to induce VSC with the carbonyl stretch in PMMA and measured the resulting infrared (IR) spectra. Our computational analysis predicts the presence of “dark” subradiant polariton states within the near-field of the QPL mode, and “bright” collective molecular states. This finding is consistent with classical and quantum mechanical descriptions of VSC that predict hybrid polariton states with cavity-like modal character and N−1 collective molecular states with minimal cavity character. However, the behaviour is opposite of what is standardly observed in VSC experiments that use “bright” cavities, which results in “bright” polariton states that can be spectrally resolved as well as N−1 collective molecular states that are spectrally absent. Our experiments confirm a reduction of molecular absorption and other spectral signatures of VSC with the QPL mode. In comparison, our experiments promoting VSC with dipolar plasmonic resonances (DPLs) reproduce the conventional behavior. Our results highlight the significance of cavity mode symmetry in modifying the properties of the resultant states from VSC, while offering prospects for direct experimental probing of the N−1 molecule-like states that are usually spectrally “dark”
Active Tuning of Plasmon Damping via Light Induced Magnetism
Circularly polarized optical excitation of plasmonic nanostructures causes coherent circulating motion of their electrons, which in turn gives rise to strong optically induced magnetization, a phenomenon known as the inverse Faraday effect (IFE). In this study we report how the IFE also significantly decreases plasmon damping. By modulating the optical polarization state incident on achiral plasmonic nanostructures from linear to circular, we observe reversible increases of reflectance by up to 8% and simultaneous increases of optical field concentration by 35.7% under 10(9) W/m(2) continuous wave (CW) optical excitation. These signatures of decreased plasmon damping were also monitored in the presence of an external magnetic field (0.2 T). We rationalize the observed decreases in plasmon damping in terms of the Lorentz forces acting on the circulating electron trajectories. Our results outline strategies for actively modulating intrinsic losses in the metal via optomagnetic effects encoded in the polarization state of incident light.11Nsciescopu
Plasmonic Au Array SERS Substrate with Optimized Thin Film Oxide Substrate Layer
This work studies the effect of a plasmonic array structure coupled with thin film oxide substrate layers on optical surface enhancement using a finite element method. Previous results have shown that as the nanowire spacing increases in the sub-100 nm range, enhancement decreases; however, this work improves upon previous results by extending the range above 100 nm. It also averages optical enhancement across the entire device surface rather than localized regions, which gives a more practical estimate of the sensor response. A significant finding is that in higher ranges, optical enhancement does not always decrease but instead has additional plasmonic modes at greater nanowire and spacing dimensions resonant with the period of the structure and the incident light wavelength, making it possible to optimize enhancement in more accessibly fabricated nanowire array structures. This work also studies surface enhancement to optimize the geometries of plasmonic wires and oxide substrate thickness. Periodic oscillations of surface enhancement are observed at specific oxide thicknesses. These results will help improve future research by providing optimized geometries for SERS molecular sensors
Dataset for SERS Plasmonic Array: Width, Spacing, and Thin Film Oxide Thickness Optimization
Surface-enhanced Raman spectroscopy (SERS) improves the scope and power of Raman spectroscopy by taking advantage of plasmonic nanostructures, which have the potential to enhance Raman signal strength by several orders of magnitude, which can allow for the detection of analyte molecules. The dataset presented provides results of a computational study that used a finite element method (FEM) to model gold nanowires on a silicon dioxide substrate. The survey calculated the surface average of optical surface enhancement due to plasmonic effects across the entire model and studied various geometric parameters regarding the width of the nanowires, spacing between the nanowires, and thickness of the silicon dioxide substrate. From this data, enhancement values were found to have a periodicity due to the thickness of the silicon dioxide. Additionally, strong plasmonic enhancement for smaller distances between nanowires were found, as expected; however, additional surface enhancement at greater gap distances were observed, which were not anticipated, possibly due to resonance with periodic dimensions and the frequency of the light. This data presentation will benefit future SERS studies by probing further into the computational and mathematical material presented previously