A digital approach for one-step formation of the supra-implant emergence profile with an individualized CAD/CAM healing abutment.

PURPOSE This Technical Procedure describes a novel workflow for a one-step formation of the supra-implant emergence profile in the esthetic zone - the 'Digitally Flip Technique' (DFT). METHODS After implant placement, a post-operative intra-oral optical scan (IOS) was performed to capture the final three-dimensional implant position. Based on the superimposition of the digitally slice-wise DICOM-segmentation of the digitally flipped (mirrored) contra-lateral tooth and the STL-file of the IOS, an individualized healing abutment was CAD/CAM-fabricated out of PMMA-based restoration material in a fully digital workflow and seated at the stage of reopening surgery. One single treatment step was necessary for final modulation of the supra-implant mucosa architecture in order to mimic the morphological emergence profile of the contra-lateral tooth within a short-span time frame of four days after insertion of the individualized healing abutment. CONCLUSIONS The implant crown emergence profile could be shaped immediately after reopening according to the three-dimensional radiographic contour of the digitally flipped contra-lateral tooth. Estimating the emergence profile or time-consuming step-by-step conditioning of the mucosa through an additionally produced implant provisional was therefore avoided

Patient-reported outcome measures compared to professional dental assessments of monolithic ZrO(2) implant fixed dental prostheses in complete digital workflows: A double-blind crossover randomized controlled trial

PURPOSE This double-blind randomized controlled trial analyzed patient-reported outcome measures in terms of subjective patient satisfaction compared to objective dental evaluation of prosthetic treatment with 3-unit monolithic zirconium dioxide implant fixed dental prostheses (iFDPs) in 3 digital workflows. MATERIAL AND METHODS Twenty patients were restored with 3 iFDPs each on Straumann TL-implants with 2 completely digital workflows using different intraoral optical scanning systems with model-free fabrication of the restoration (Trios 3/3Shape [Test-1]; Virtuo Vivo/Straumann [Test-2]), and mixed analog-digital workflow with conventional impressions and digitized gypsum casts (Impregum/3M Espe [Control]). The order of impression-taking and the prosthetic try-in were randomly allocated. Sixty iFDPs were compared for patient satisfaction and dental evaluation using ANOVA. RESULTS For iFDP evaluation, patients generally provided more favorable ratings than dental experts, regardless of the workflow. ANOVA revealed no significant difference for overall satisfaction when comparing Test-1, Test-2, or Control, either for patients (f-ratio: 0.13; p = 0.876) or dentist (f-ratio: 1.55: p = 0.221). Secondary, patients clearly favored the digital impression workflows over the conventional approach (f-ratio: 14.57; p < 0.001). Overall, the 3Shape workflow (Test-1) received the highest scores for all analyses. CONCLUSIONS The different digital workflows demonstrated minor influence on the subjective and objective evaluation of the monolithic zirconium dioxide iFDPs in nonesthetic regions; however, the dentist may significantly increase patient satisfaction by choosing intraoral scanning instead of conventional impressions. The dentist has to consider individual patients' needs to fulfill their expectations for a personalized solution

The influence of age and gender on perception of orofacial esthetics among laypersons in Switzerland.

OBJECTIVE The purpose of this study was to evaluate the perception and role of orofacial esthetics by laypersons, and how attitudes may be correlated with age and gender in Switzerland. MATERIAL AND METHODS Self-administrated questionnaires (SAQ) were distributed both conventionally and digitally to Swiss residents over 16 years of age (range 16-99 years). The participants were identified in the medical practice, at an open house of the ZMK Bern, in elderly care centers, and via the internet (Facebook and Instagram). To verify that the participants were Swiss residents and laypersons, they were checked by an operator (conventional) or were provided an exact description of eligible participants at the beginning of the SAQ (digital). The SAQ included 30 questions with multiple-choice responses and visual analogue scales (0-100) divided into four sections regarding dental appearance with respect to body esthetics, partner selection, employment and career opportunities, and overall health/quality-of-life. For statistical analysis, respondents were segregated into two age groups (<25 years and ≥25 years) and into two gender groups (male and female). Descriptive analyses, the Fisher exact test, and Welch's t-test were applied (α = 0.05). RESULTS Five hundred and two laypersons completed the SAQ. The study's hypothesis-that various age groups and genders have different perceptions of dental esthetics-was supported. The willingness to correct one's own dentition was lower among older participants (OR: 0.54; p = 0.001); charisma and dental esthetics were considered equally important with a trend toward charisma in both age groups (p = 0.003). The belief that excellent dentition improves employment chances at a job interview (OR: 0.47; p = 0.0003) was significantly lower among older participants, and the belief that dental correction would improve quality-of-life was significantly higher among older participants (OR: 1.81; p = 0.001). The assumption that individuals with attractive teeth appear happier was significantly lower among older respondents (OR: 0.67; p = 0.03). Women were less satisfied with their dental appearance and, proportionally, their willingness to receive correction was significantly higher (OR: 1.79; p = 0.01 and OR: 1.77; p = 0.002 relative to men, respectively). Moreover, male participants had a lower desire to have brighter teeth and undergo bleaching treatments (OR: 0.54; p = 0.002; OR: 0.53; p = 0.002). The proportion of men believing that having beautiful teeth improves attractiveness and employment chances was significantly lower (OR: 0.33; p = 0.02 and OR: 0.66; p = 0.04; respectively). CONCLUSIONS Within the limitations of this observational study, it was concluded that age and gender of laypersons in Switzerland have a significant impact on the perception of dental esthetics. CLINICAL SIGNIFICANCE Evaluating and quantifying perceptions of dental esthetics for daily life across various age groups and genders can improve clinicians' understanding of individual needs in order to offer patient-oriented dental care

Single-tooth replacement: factors affecting different prosthetic treatment modalities

<p>Abstract</p> <p>Background</p> <p>The choice between several treatment options for replacing a single missing tooth is influenced by clinical, dentist- and patient-immanent factors. This study aimed to determine the patient factors that would affect the treatment decision to replace a single missing tooth and to assess the satisfaction with several options.</p> <p>Method</p> <p>200 volunteers involved (121 females and 79 males) divided into four groups, Group A: consisted of patients with conventional fixed partial dentures or patients with resin bonded fixed partial dentures. Group B: consisted of patients who received removable partial dentures while Group C: consisted of patients who received a single implant supported crown, and a control group D: consisted of patients who received no treatment. Data were collected using a questionnaire.</p> <p>Results</p> <p>The highest percentage of males within groups (58%) was within the removable prostheses category. The majority of the subjects in the study reported that the main reason for replacing a missing tooth was for esthetic and function. Most important factor affecting the choice between treatment modalities was damaging the neighboring teeth. Pain, post operative sensitivity and dental phobia were important factors in choosing the prosthesis type and affected the control group patients not to have any treatment. The highest satisfaction percentage among groups studied was recorded for dental implants then FPD groups, while the least percentage were in both the control and RPD groups, for all aspects of function, esthetic and speech efficiency.</p> <p>Conclusions</p> <p>The final choice between FPD, RPD and implant depended on several factors which affected the decision making; among these is cost and patients' awareness of the different treatment options.</p

Complete digital workflow for the production of implant-supported single-unit monolithic crowns.

OBJECTIVES The aim of this case series was to introduce a complete digital workflow for the production of monolithic implant crowns. MATERIAL AND METHODS Six patients were treated with implant-supported crowns made of resin nano ceramic (RNC). Starting with an intraoral optical scan (IOS), and following a CAD/CAM process, the monolithic crowns were bonded either to a novel prefabricated titanium abutment base (group A) or to a CAD/CAM-generated individualized titanium abutment (group B) in premolar or molar sites on a soft tissue level dental implant. Economic analyses included clinical and laboratory steps. An esthetic evaluation was performed to compare the two abutment-crown combinations. RESULTS None of the digitally constructed RNC crowns required any clinical adaptation. Overall mean work time calculations revealed obvious differences for group A (65.3 min) compared with group B (86.5 min). Esthetic analysis demonstrated a more favorable outcome for the prefabricated bonding bases. CONCLUSIONS Prefabricated or individualized abutments on monolithic RNC crowns using CAD/CAM technology in a model-free workflow seem to provide a feasible and streamlined treatment approach for single-edentulous space rehabilitation in the posterior region. However, RNC as full-contour material has to be considered experimental, and further large-scale clinical investigations with long-term follow-up observation are necessary

Management of a complication with a fractured zirconia implant abutment in the esthetic zone

Technical complications in implant prosthetic cases represent a major challenge in dentistry. This case report describes minimally invasive management to recover an implant with a fractured remnant of a zirconia abutment, including provisional rehabilitation during a sequential treatment protocol in the esthetic zone. A patient was treated with a screw-retained one-piece implant-supported reconstruction made of a customized zirconia abutment with direct ceramic veneering in the maxillary right central incisor position. During the prosthetic try-in, a fracture in the apical portion of the abutment was evident. The first rescue attempt led to fracture of the retrieval instrument. Immediately, an individualized wired construction was applied to bond the existing fractured reconstruction to the neighboring teeth to maintain the peri-implant mucosal architecture. Because the implant screw canal was blocked, a customized round bur had to be manufactured and was placed in the implant axis with a specific bracket tool from the service set to protect the interior implant threads. Then, the drills of the service set were guided by the newly created access to remove the fractured remnants. The implant screw was retapped and the area rinsed with chlorhexidine solution. All remnants were removed without the need for surgical intervention. Neither the implant connection nor the bone-to-implant interface was damaged. The stepwise treatment approach with the customized round bur combined with the system-specific drills of the service set saved the blocked implant so that the patient could be successfully rehabilitated with a new implant reconstruction

Time-efficiency analysis of the treatment with monolithic implant crowns in a digital workflow: a randomized controlled trial.

OBJECTIVES The aim of the randomized controlled trial was to analyze time-efficiency of a treatment with implant crowns made of monolithic lithium disilicate (LS2) plus titanium base vs. porcelain fuse to zirconium dioxide (ZrO2 ) in a digital workflow. MATERIALS AND METHODS Twenty study participants were included for single-tooth replacement in premolar and molar sites. Baseline was the start of the prosthetic treatment. All patients received transocclusal screw-retained implant reconstructions on a soft tissue level-type implant. The 3D implant position was captured with intraoral optical scanning (IOS). After randomization, ten patients were restored with CAD-/CAM-produced monolithic LS2-crowns bonded to prefabricated titanium abutments without any physical models (test), and ten patients with CAD-/CAM-fabricated ZrO2 -suprastructures and hand-layered ceramic veneering with milled master models (control). Every single clinical and laboratory work step was timed in minutes and then analyzed for time-efficiency with Wilcoxon Rank Sum Tests. Direct costs were assessed for laboratory fees for first line production in Swiss Francs (CHF). RESULTS Two clinical appointments were necessary for IOS and seating of all implant crowns. The mean total production time, as the sum of clinical plus laboratory work steps, was significantly different, resulting in 75.3 min (SD ± 2.1) for test and 156.6 min (SD ± 4.6) for control [P = 0.0001]. Analysis for clinical treatment sessions showed a significantly shorter mean chair time for the complete digital workflow of 20.8 min (SD ± 0.3) compared to 24.1 min (SD ± 1.1) [P = 0.001]. Even more obvious were the results for the mean laboratory work time with a significant reduction of 54.5 min (SD ± 4.9) vs. 132.5 min (SD ± 8.7), respectively [P = 0.0001]. CONCLUSION The test workflow was more time-efficient than the controls for implant-supported crowns; notably, laboratory fabrication steps could be effectively shortened with the digital process of monolithic LS2 plus titanium base resulting in more than 30% reduced overall treatment costs

Patient-centered outcomes comparing digital and conventional implant impression procedures: a randomized crossover trial.

OBJECTIVES The aim of this randomized controlled trial was to compare patient-centered outcomes during digital and conventional implant impressions. MATERIAL AND METHODS In a crossover study design, intraoral scanning (IOS) [test] as well as classical polyether impressions [control] were both performed on 20 patients for single-tooth replacement with implant-supported crowns. The sequential distribution of either starting with the test or the control procedure was randomly selected. Patients' perception and satisfaction on the level of convenience-related factors were assessed with visual analogue scale (VAS) questionnaires. In addition, clinical work time was separately recorded for test and control procedures. Statistical analyses were performed with Wilcoxon signed-rank tests and corrected for multiple testing by the method of Holm. RESULTS On VAS ranging from 0 to 100, patients scored a mean convenience level of 78.6 (SD ± 14.0) in favor of IOS compared to conventional impressions with 53.6 (SD ± 15.4) [P = 0.0001]. All included patients would prefer the digital workflow if in the future they could choose between the two techniques. Secondary, IOS was significantly faster with 14.8 min (SD ± 2.2) compared to the conventional approach with 17.9 min (SD ± 1.1) [P = 0.0001]. CONCLUSION Based on the findings of this investigation, both impression protocols worked successfully for all study participants capturing the 3D implant positions. However, the digital technique emerges as the most preferred one according to patient-centered outcomes and was more time-effective compared to conventional impressions

Digital vs. conventional implant prosthetic workflows: a cost/time analysis.

OBJECTIVES The aim of this prospective cohort trial was to perform a cost/time analysis for implant-supported single-unit reconstructions in the digital workflow compared to the conventional pathway. MATERIALS AND METHODS A total of 20 patients were included for rehabilitation with 2 × 20 implant crowns in a crossover study design and treated consecutively each with customized titanium abutments plus CAD/CAM-zirconia-suprastructures (test: digital) and with standardized titanium abutments plus PFM-crowns (control conventional). Starting with prosthetic treatment, analysis was estimated for clinical and laboratory work steps including measure of costs in Swiss Francs (CHF), productivity rates and cost minimization for first-line therapy. Statistical calculations were performed with Wilcoxon signed-rank test. RESULTS Both protocols worked successfully for all test and control reconstructions. Direct treatment costs were significantly lower for the digital workflow 1815.35 CHF compared to the conventional pathway 2119.65 CHF [P = 0.0004]. For subprocess evaluation, total laboratory costs were calculated as 941.95 CHF for the test group and 1245.65 CHF for the control group, respectively [P = 0.003]. The clinical dental productivity rate amounted to 29.64 CHF/min (digital) and 24.37 CHF/min (conventional) [P = 0.002]. Overall, cost minimization analysis exhibited an 18% cost reduction within the digital process. CONCLUSION The digital workflow was more efficient than the established conventional pathway for implant-supported crowns in this investigation

Time-Efficiency Analysis Comparing Digital and Conventional Workflows for Implant Crowns: A Prospective Clinical Crossover Trial

PURPOSE To compare time-efficiency in the production of implant crowns using a digital workflow versus the conventional pathway. MATERIALS AND METHODS This prospective clinical study used a crossover design that included 20 study participants receiving single-tooth replacements in posterior sites. Each patient received a customized titanium abutment plus a computer-aided design/computer-assisted manufacture (CAD/CAM) zirconia suprastructure (for those in the test group, using digital workflow) and a standardized titanium abutment plus a porcelain-fused-to-metal crown (for those in the control group, using a conventional pathway). The start of the implant prosthetic treatment was established as the baseline. Time-efficiency analysis was defined as the primary outcome, and was measured for every single clinical and laboratory work step in minutes. Statistical analysis was calculated with the Wilcoxon rank sum test. RESULTS All crowns could be provided within two clinical appointments, independent of the manufacturing process. The mean total production time, as the sum of clinical plus laboratory work steps, was significantly different. The mean ± standard deviation (SD) time was 185.4 ± 17.9 minutes for the digital workflow process and 223.0 ± 26.2 minutes for the conventional pathway (P = .0001). Therefore, digital processing for overall treatment was 16% faster. Detailed analysis for the clinical treatment revealed a significantly reduced mean ± SD chair time of 27.3 ± 3.4 minutes for the test group compared with 33.2 ± 4.9 minutes for the control group (P = .0001). Similar results were found for the mean laboratory work time, with a significant decrease of 158.1 ± 17.2 minutes for the test group vs 189.8 ± 25.3 minutes for the control group (P = .0001). CONCLUSION Only a few studies have investigated efficiency parameters of digital workflows compared with conventional pathways in implant dental medicine. This investigation shows that the digital workflow seems to be more time-efficient than the established conventional production pathway for fixed implant-supported crowns. Both clinical chair time and laboratory manufacturing steps could be effectively shortened with the digital process of intraoral scanning plus CAD/CAM technology