Design and analysis of seals for extended service life

Space Station Freedom is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools, which in turn, are to be used to qualify the flight hardware. This research is totally focused on O-rings that are compressed by perpendicular clamping forces. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section

Investigation of low velocity impact damage on filamentary composite materials

Presented are the results of an investigation of the effect of low velocity impact on the residual modulus and residual strength of flat filamentary composite materials. Theoretical analysis of composite materials indicates that the modulus of the material must decrease as impact damage increases. This decrease must also correlate to the decrease in residual strength. This study attempts to verify these hypotheses. Graphite/epoxy laminates (AS4/3501-6) of various fiber orientations (8 (0 deg), 2 (+ or - 45 deg)sub 8) were impacted using a falling weight impact tester. Impact energies ranged from 0.42 to 1.55 ft-lb, with impact velocities from 2.03 to 3.98 ft/sec. The results show that there is a reduction in residual modulus of the plate as the impact energy increases

Composite propellant technology research: Mechanical property characterization

Proof for the existence of a single Poisson's ratio function in isotropic linear viscoelastic materials is presented. An in-depth discussion is given of three dimensional viscoelastic material properties and their relationships to linear isotropic and orthotropic viscoelastic materials. A discussion of the alternate invariant definition as used by Abaqus and how it relates to the form used by Dr. S. Peng is presented

Characterization of elastomeric materials with application to design

Redesign of the Space Shuttle Solid Booster has necessitated re-evaluation of the material used in the field joint O-ring seals. The viscoelastic characteristics of five candidate materials were determined. The five materials are: two fluorocarbon compounds, two nitrile compounds, and a silicon compound. The materials were tested in a uniaxial compression test to determine the characteristic relaxation functions. These tests were performed at five different temperatures. A master material curve was developed for each material from the experimental data. The results are compared to tensile relaxation tests. Application of these results to the design analysis is discussed in detail

The Relationship Between a Specific Stress Management Program and the Reading Attitudes of First Grade Students

The purpose of this study was to determine whether the Kiddie QR stress management technique would affect the reading attitude of first grade students. It was also the intent of the investigation to examine whether the subjects of the treatment group, identified as least stressed and most stressed, would make gains in reading attitude. Statistical analysis of pre and post reading attitude scores of the treatment and control groups revealed the following results: There was no significant difference in the reading attitudes of the treatment group as compared to the control group after the former received instruction in Kiddie QR. There was also no significant difference in the reading attitudes of the most stressed subjects as compared to least stressed after each received instruction and utilized Kiddie QR. While research indicates that alleviation of stress yields positive results, this study did not show a positive relationship between stress and reading attitude. This could be an indication that a longer relaxation period was necessary. Further investigation in this area is warranted

Viscoelastic analysis of seals for extended service life

The space station is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program (2) has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools which in turn, are to be used to qualify the flight hardware. Seals are simple devices, in wide spread use. The most common type of seal is the O-ring. O-ring seals are typically rings of rubber with a circular cross section. The rings are placed between the surfaces to be sealed, usually in a groove of some design. The particular design may differ based on a number of different factors. This research is focused on O-rings that are staticly compressed by perpendicular clamping forces, commonly referred to as face seals. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section

HIV-associated anal cancer

HIV-associated anal carcinoma, a non-AIDS-defining cancer, is a human papillomavirus-associated malignancy with a spectrum of preinvasive changes. The standardized incidence ratio for anal cancer in patients with HIV/AIDS is 20-50. Algorithms for anal cancer screening include anal cytology followed by high-resolution anoscopy for those with abnormal findings. Outpatient topical treatments for anal intraepithelial neoplasia include infrared coagulation therapy, trichloroacetic acid, and imiquimod. The development of cost-effective national screening programs for HIV-associated anal cancer remains a challenge

Systematic Propulsion Optimization Tools (SPOT)

This paper describes a computer program written by senior-level Mechanical Engineering students at the University of Alabama in Huntsville which is capable of optimizing user-defined delivery systems for carrying payloads into orbit. The custom propulsion system is designed by the user through the input of configuration, payload, and orbital parameters. The primary advantages of the software, called Systematic Propulsion Optimization Tools (SPOT), are a user-friendly interface and a modular FORTRAN 77 code designed for ease of modification. The optimization of variables in an orbital delivery system is of critical concern in the propulsion environment. The mass of the overall system must be minimized within the maximum stress, force, and pressure constraints. SPOT utilizes the Design Optimization Tools (DOT) program for the optimization techniques. The SPOT program is divided into a main program and five modules: aerodynamic losses, orbital parameters, liquid engines, solid engines, and nozzles. The program is designed to be upgraded easily and expanded to meet specific user needs. A user's manual and a programmer's manual are currently being developed to facilitate implementation and modification

Computational Efficiency: A Common Organizing Principle for Parallel Computer Maps and Brain Maps?

It is well-known that neural responses in particular brain regions are spatially organized, but no general principles have been developed that relate the structure of a brain map to the nature of the associated computation. On parallel computers, maps of a sort quite similar to brain maps arise when a computation is distributed across multiple processors. In this paper we will discuss the relationship between maps and computations on these computers and suggest how similar considerations might also apply to maps in the brain